When BIG-IP 14.0.0-14.1.0.1, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.2-11.5.8 are processing certain rare data sequences occurring in PPTP VPN traffic, the BIG-IP system may execute incorrect logic. The TMM may restart and produce a core file as a result of this condition. The BIG-IP system provisioned with the CGNAT module and configured with a virtual server using a PPTP profile is exposed to this vulnerability.
On BIG-IP versions 14.0.0-14.0.0.4, 13.0.0-13.1.1.1, 12.1.0-12.1.4, 11.6.0-11.6.3.4, and 11.5.1-11.5.8, the system is vulnerable to a denial of service attack when performing URL classification.
On BIG-IP 11.5.1-11.5.8, 11.6.1-11.6.3, 12.1.0-12.1.3.6, 13.0.0-13.1.1.1, and 14.0.0-14.0.0.2, under certain conditions, hardware systems with a High-Speed Bridge and using non-default Layer 2 forwarding configurations may experience a lockup of the High-Speed Bridge.
On BIG-IP 11.5.1-11.6.3, 12.1.0-12.1.3, 13.0.0-13.1.1.1, and 14.0.0-14.0.0.2, under certain conditions, the snmpd daemon may leak memory on a multi-blade BIG-IP vCMP guest when processing authorized SNMP requests.
In BIG-IP 11.5.1-11.5.8, 11.6.1-11.6.3, 12.1.0-12.1.3, and 13.0.0-13.0.1, malformed TCP packets sent to a self IP address or a FastL4 virtual server may cause an interruption of service. The control plane is not exposed to this issue. This issue impacts the data plane virtual servers and self IPs.
Platform dependent weakness. This issue only impacts iSeries platforms. On these platforms, in BIG-IP (LTM, AAM, AFM, Analytics, APM, ASM, DNS, Edge Gateway, FPS, GTM, Link Controller, PEM, WebAccelerator) versions 14.0.0-14.1.0.1, 13.0.0-13.1.1.3, and 12.1.1 HF2-12.1.4, the secureKeyCapable attribute was not set which causes secure vault to not use the F5 hardware support to store the unit key. Instead the unit key is stored in plaintext on disk as would be the case for Z100 systems. Additionally this causes the unit key to be stored in UCS files taken on these platforms.
On BIG-IP 11.5.1-11.6.3.4, 12.1.0-12.1.3.7, 13.0.0-13.1.1.3, and 14.0.0-14.0.0.2, when processing certain SNMP requests with a request-id of 0, the snmpd process may leak a small amount of memory.
In BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.0.7, 12.1.0-12.1.3.5, 11.6.1-11.6.3.2, or 11.5.1-11.5.8 or Enterprise Manager 3.1.1, malformed requests to the Traffic Management User Interface (TMUI), also referred to as the BIG-IP Configuration utility, may lead to disruption of TMUI services. This attack requires an authenticated user with any role (other than the No Access role). The No Access user role cannot login and does not have the access level to perform the attack.
In BIG-IP 13.0.0-13.1.1.1, 12.1.0-12.1.3.7, 11.6.1-11.6.3.2, or 11.5.1-11.5.8 or Enterprise Manager 3.1.1, when authenticated administrative users run commands in the Traffic Management User Interface (TMUI), also referred to as the BIG-IP Configuration utility, restrictions on allowed commands may not be enforced.
On BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.1.3, 12.1.0-12.1.3.7, and 11.6.0-11.6.3.2, a reflected Cross Site Scripting (XSS) vulnerability is present in an undisclosed page of the BIG-IP TMUI (Traffic Management User Interface) also known as the BIG-IP configuration utility.
On BIG-IP APM 14.0.0 to 14.0.0.4, 13.0.0 to 13.1.1.3 and 12.1.0 to 12.1.3.7, a reflected cross-site scripting (XSS) vulnerability exists in the resource information page for authenticated users when a full webtop is configured on the BIG-IP APM system.
In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, Edge Gateway, GTM, Link Controller, PEM, WebAccelerator and WebSafe software version 13.0.0, 12.0.0 - 12.1.2, 11.6.0 - 11.6.1 and 11.5.0 - 11.5.4, in some circumstances, Traffic Management Microkernel (TMM) does not properly handle certain malformed TLS1.2 records, which allows remote attackers to cause a denial-of-service (DoS) or possible remote command execution on the BIG-IP system.
In F5 BIG-IP APM 13.0.0-13.1.1.1, APM Client 7.1.5-7.1.6, and/or Edge Client 7101-7160, the BIG-IP APM Edge Client component loads the policy library with user permission and bypassing the endpoint checks.
In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, Link Controller, PEM and WebSafe software version 13.0.0 and 12.1.0 - 12.1.2, race conditions in iControl REST may lead to commands being executed with different privilege levels than expected.
On F5 BIG-IP 13.0.0, 12.0.0-12.1.3.1, 11.6.0-11.6.2, 11.4.1-11.5.5, or 11.2.1, malformed SPDY or HTTP/2 requests may result in a disruption of service to TMM. Data plane is only exposed when a SPDY or HTTP/2 profile is attached to a virtual server. There is no control plane exposure.
In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, GTM, Link Controller, PEM and WebSafe software version 13.0.0 and 12.1.0 - 12.1.2, malicious requests made to virtual servers with an HTTP profile can cause the TMM to restart. The issue is exposed with BIG-IP APM profiles, regardless of settings. The issue is also exposed with the non-default "normalize URI" configuration options used in iRules and/or BIG-IP LTM policies.
On F5 BIG-IP 13.0.0, 12.1.0-12.1.2, 11.6.0-11.6.3.1, or 11.2.1-11.5.6 a domain name cached within the DNS Cache of TMM may continue to be resolved by the cache even after the parent server revokes the record, if the DNS Cache is receiving a stream of requests for the cached name.
Through undisclosed methods, on F5 BIG-IP 13.0.0-13.1.0.7, 12.1.0-12.1.3.5, 11.6.0-11.6.3.1, or 11.2.1-11.5.6, adjacent network attackers can cause a denial of service for VCMP guest and host systems. Attack must be sourced from adjacent network (layer 2).
Responses to SOCKS proxy requests made through F5 BIG-IP version 13.0.0, 12.0.0-12.1.3.1, 11.6.1-11.6.2, or 11.5.1-11.5.5 may cause a disruption of services provided by TMM. The data plane is impacted and exposed only when a SOCKS proxy profile is attached to a Virtual Server. The control plane is not impacted by this vulnerability.
Under certain conditions for F5 BIG-IP systems 13.0.0 or 12.1.0 - 12.1.3.1, using FastL4 profiles, when the Reassemble IP Fragments option is disabled (default), some specific large fragmented packets may restart the Traffic Management Microkernel (TMM).
F5 BIG-IP 13.0.0-13.1.0.5, 12.1.0-12.1.3.5, or 11.6.0-11.6.3.1 virtual servers with HTTP/2 profiles enabled are vulnerable to "HPACK Bomb".
On BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.1.1, or 12.1.0-12.1.3.7, or Enterprise Manager 3.1.1, when authenticated administrative users run commands in the Traffic Management User Interface (TMUI), also referred to as the BIG-IP Configuration utility, restrictions on allowed commands may not be enforced.
On BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.1.1, or 12.1.0-12.1.3.7, when a virtual server using the inflate functionality to process a gzip bomb as a payload, the BIG-IP system will experience a fatal error and may cause the Traffic Management Microkernel (TMM) to produce a core file.
In F5 BIG-IP APM software version 13.0.0 and 12.1.2, in some circumstances, APM tunneled VPN flows can cause a VPN/PPP connflow to be prematurely freed or cause TMM to stop responding with a "flow not in use" assertion. An attacker may be able to disrupt traffic or cause the BIG-IP system to fail over to another device in the device group.
In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, GTM, Link Controller, PEM and Websafe software version 13.0.0, 12.0.0 to 12.1.2, 11.6.0 to 11.6.1 and 11.5.0 - 11.5.4, an undisclosed sequence of packets sent to BIG-IP High Availability state mirror listeners (primary and/or secondary IP) may cause TMM to restart.
In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, Edge Gateway, GTM, Link Controller, PEM, WebAccelerator and WebSafe software version 13.0.0, undisclosed requests made to BIG-IP virtual servers which make use of the "HTTP/2 profile" may result in a disruption of service to TMM.
In F5 BIG-IP APM software version 13.0.0 and 12.1.2, under rare conditions, the BIG-IP APM system appends log details when responding to client requests. Details in the log file can vary; customers running debug mode logging with BIG-IP APM are at highest risk.
Under certain conditions on F5 BIG-IP 13.1.0-13.1.0.5, 13.0.0, 12.1.0-12.1.3.1, 11.6.0-11.6.3.1, or 11.5.0-11.5.6, TMM may core while processing SSL forward proxy traffic.
On F5 BIG-IP 14.0.0, 13.0.0-13.1.0, 12.1.0-12.1.3, or 11.5.1-11.6.3 specifically crafted HTTP responses, when processed by a Virtual Server with an associated QoE profile that has Video enabled, may cause TMM to incorrectly buffer response data causing the TMM to restart resulting in a Denial of Service.
In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, GTM, Link Controller, PEM and WebSafe software version 13.0.0, a slow memory leak as a result of undisclosed IPv4 or IPv6 packets sent to BIG-IP management port or self IP addresses may lead to out of memory (OOM) conditions.