Last updated 24 July 2024

When BIG-IP 14.0.0-14.1.0.1, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.2-11.5.8 are processing certain rare data sequences occurring in PPTP VPN traffic, the BIG-IP system may execute incorrect logic. The TMM may restart and produce a core file as a result of this condition. The BIG-IP system provisioned with the CGNAT module and configured with a virtual server using a PPTP profile is exposed to this vulnerability.

On BIG-IP 11.5.1-11.5.8, 11.6.1-11.6.3, 12.1.0-12.1.3.6, 13.0.0-13.1.1.1, and 14.0.0-14.0.0.2, under certain conditions, hardware systems with a High-Speed Bridge and using non-default Layer 2 forwarding configurations may experience a lockup of the High-Speed Bridge.

On BIG-IP 11.5.1-11.6.3, 12.1.0-12.1.3, 13.0.0-13.1.1.1, and 14.0.0-14.0.0.2, under certain conditions, the snmpd daemon may leak memory on a multi-blade BIG-IP vCMP guest when processing authorized SNMP requests.

On BIG-IP ASM 11.5.1-11.5.8, 11.6.1-11.6.3, 12.1.0-12.1.3, 13.0.0-13.1.1.3, and 14.0.0-14.0.0.2, there is a stored cross-site scripting vulnerability in an ASM violation viewed in the Configuration utility. In the worst case, an attacker can store a CSRF which results in code execution as the admin user.

Platform dependent weakness. This issue only impacts iSeries platforms. On these platforms, in BIG-IP (LTM, AAM, AFM, Analytics, APM, ASM, DNS, Edge Gateway, FPS, GTM, Link Controller, PEM, WebAccelerator) versions 14.0.0-14.1.0.1, 13.0.0-13.1.1.3, and 12.1.1 HF2-12.1.4, the secureKeyCapable attribute was not set which causes secure vault to not use the F5 hardware support to store the unit key. Instead the unit key is stored in plaintext on disk as would be the case for Z100 systems. Additionally this causes the unit key to be stored in UCS files taken on these platforms.

On BIG-IP 11.5.1-11.6.3.4, 12.1.0-12.1.3.7, 13.0.0-13.1.1.3, and 14.0.0-14.0.0.2, when processing certain SNMP requests with a request-id of 0, the snmpd process may leak a small amount of memory.

In BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.0.7, 12.1.0-12.1.3.5, 11.6.1-11.6.3.2, or 11.5.1-11.5.8 or Enterprise Manager 3.1.1, malformed requests to the Traffic Management User Interface (TMUI), also referred to as the BIG-IP Configuration utility, may lead to disruption of TMUI services. This attack requires an authenticated user with any role (other than the No Access role). The No Access user role cannot login and does not have the access level to perform the attack.

On BIG-IP 11.5.1-11.6.3.2, 12.1.3.4-12.1.3.7, 13.0.0 HF1-13.1.1.1, and 14.0.0-14.0.0.2, Multi-Path TCP (MPTCP) does not protect against multiple zero length DATAFINs in the reassembly queue, which can lead to an infinite loop in some circumstances.

On BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.1.3, 12.1.0-12.1.3.7, and 11.6.0-11.6.3.2, a reflected Cross Site Scripting (XSS) vulnerability is present in an undisclosed page of the BIG-IP TMUI (Traffic Management User Interface) also known as the BIG-IP configuration utility.

By design, BIND is intended to limit the number of TCP clients that can be connected at any given time. The number of allowed connections is a tunable parameter which, if unset, defaults to a conservative value for most servers. Unfortunately, the code which was intended to limit the number of simultaneous connections contained an error which could be exploited to grow the number of simultaneous connections beyond this limit. Versions affected: BIND 9.9.0 -> 9.10.8-P1, 9.11.0 -> 9.11.6, 9.12.0 -> 9.12.4, 9.14.0. BIND 9 Supported Preview Edition versions 9.9.3-S1 -> 9.11.5-S3, and 9.11.5-S5. Versions 9.13.0 -> 9.13.7 of the 9.13 development branch are also affected. Versions prior to BIND 9.9.0 have not been evaluated for vulnerability to CVE-2018-5743.

A race condition which may occur when discarding malformed packets can result in BIND exiting due to a REQUIRE assertion failure in dispatch.c. Versions affected: BIND 9.11.0 -> 9.11.7, 9.12.0 -> 9.12.4-P1, 9.14.0 -> 9.14.2. Also all releases of the BIND 9.13 development branch and version 9.15.0 of the BIND 9.15 development branch and BIND Supported Preview Edition versions 9.11.3-S1 -> 9.11.7-S1.

An excessive resource consumption flaw was found in the way the Linux kernel's networking subsystem processed TCP Selective Acknowledgment (SACK) segments. While processing SACK segments, the Linux kernel's socket buffer (SKB) data structure becomes fragmented, which leads to increased resource utilization to traverse and process these fragments as further SACK segments are received on the same TCP connection. A remote attacker could use this flaw to cause a denial of service (DoS) by sending a crafted sequence of SACK segments on a TCP connection.

On BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.1.1, or 12.1.0-12.1.3.7, or Enterprise Manager 3.1.1, when authenticated administrative users run commands in the Traffic Management User Interface (TMUI), also referred to as the BIG-IP Configuration utility, restrictions on allowed commands may not be enforced.

On BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.1.1, or 12.1.0-12.1.3.7, when a virtual server using the inflate functionality to process a gzip bomb as a payload, the BIG-IP system will experience a fatal error and may cause the Traffic Management Microkernel (TMM) to produce a core file.

On F5 BIG-IP 14.0.0, 13.0.0-13.1.0, 12.1.0-12.1.3, or 11.5.1-11.6.3 specifically crafted HTTP responses, when processed by a Virtual Server with an associated QoE profile that has Video enabled, may cause TMM to incorrectly buffer response data causing the TMM to restart resulting in a Denial of Service.

An Information Disclosure vulnerability exists in NTP 4.2.7p25 private (mode 6/7) messages via a GETRESTRICT control message, which could let a malicious user obtain sensitive information.

On BIG-IP 14.0.x, 13.x, 12.x, and 11.x, Enterprise Manager 3.1.1, BIG-IQ 6.x, 5.x, and 4.x, and iWorkflow 2.x, the passphrases for SNMPv3 users and trap destinations that are used for authentication and privacy are not handled by the BIG-IP system Secure Vault feature; they are written in the clear to the various configuration files.

On versions 11.2.1. and greater, unrestricted Snapshot File Access allows BIG-IP system's user with any role, including Guest Role, to have access and download previously generated and available snapshot files on the BIG-IP configuration utility such as QKView and TCPDumps.

Last updated 24 July 2024

On BIG-IP versions 15.0.0-15.1.0, 14.0.0-14.1.2.3, 13.1.0-13.1.3.2, 12.1.0-12.1.5, and 11.5.2-11.6.5.1, BIG-IQ versions 7.0.0, 6.0.0-6.1.0, and 5.0.0-5.4.0, iWorkflow version 2.3.0, and Enterprise Manager version 3.1.1, authenticated users granted TMOS Shell (tmsh) privileges are able access objects on the file system which would normally be disallowed by tmsh restrictions. This allows for authenticated, low privileged attackers to access objects on the file system which would not normally be allowed.

On BIG-IP versions 15.0.0-15.0.1.1, 14.1.0-14.1.2.2, 14.0.0-14.0.1, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.2-11.6.5.1, users with access to edit iRules are able to create iRules which can lead to an elevation of privilege, configuration modification, and arbitrary system command execution.

On BIG-IP versions 15.0.0-15.0.1, 14.1.0-14.1.2.2, 14.0.0-14.0.1, and 13.1.0-13.1.3.1, the TMM process may restart when the packet filter feature is enabled.

On BIG-IP 15.0.0-15.0.1, 14.1.0-14.1.2, 14.0.0-14.0.1, and 13.1.0-13.1.3.1, under certain conditions tmm may leak memory when processing packet fragments, leading to resource starvation.

The BIG-IP 15.0.0-15.0.1, 14.0.0-14.1.2.2, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.1-11.6.5.1, BIG-IQ 7.0.0, 6.0.0-6.1.0, and 5.2.0-5.4.0, iWorkflow 2.3.0, and Enterprise Manager 3.1.1 configuration utility is vulnerable to Anti DNS Pinning (DNS Rebinding) attack.

On versions 15.0.0-15.0.1.1, 14.1.0-14.1.2.2, 14.0.0-14.0.1, 13.1.0-13.1.3.2, 12.1.0-12.1.5, and 11.5.2-11.6.5.1, BIG-IP virtual servers with Loose Initiation enabled on a FastL4 profile may be subject to excessive flow usage under undisclosed conditions.

On BIG-IP versions 15.0.0-15.0.1, 14.1.0-14.1.2, 14.0.0-14.0.1, 13.1.0-13.1.3.2, 12.1.0-12.1.5, and 11.5.2-11.6.5, while processing traffic through a standard virtual server that targets a FastL4 virtual server (VIP on VIP), hardware appliances may stop responding.

On BIG-IP versions 15.0.0-15.0.1.1, 14.1.0-14.1.2.2, 14.0.0-14.0.1, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.2-11.6.5 and BIG-IQ versions 6.0.0-6.1.0 and 5.2.0-5.4.0, a user is able to obtain the secret that was being used to encrypt a BIG-IP UCS backup file while sending SNMP query to the BIG-IP or BIG-IQ system, however the user can not access to the UCS files.

On BIG-IP versions 15.0.0-15.0.1, 14.1.0-14.1.2, 14.0.0-14.0.1, 13.1.0-13.1.3.1, and 12.1.0-12.1.5, under certain conditions when using custom TCP congestion control settings in a TCP profile, TMM stops processing traffic when processed by an iRule.

On versions 15.0.0-15.0.1.1, 14.0.0-14.1.2.2, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.2-11.6.5.1, under certain conditions, a multi-bladed BIG-IP Virtual Clustered Multiprocessing (vCMP) may drop broadcast packets when they are rebroadcast to the vCMP guest secondary blades. An attacker can leverage the fragmented broadcast IP packets to perform any type of fragmentation-based attack.