When BIG-IP 14.0.0-14.1.0.1, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.2-11.5.8 are processing certain rare data sequences occurring in PPTP VPN traffic, the BIG-IP system may execute incorrect logic. The TMM may restart and produce a core file as a result of this condition. The BIG-IP system provisioned with the CGNAT module and configured with a virtual server using a PPTP profile is exposed to this vulnerability.
Platform dependent weakness. This issue only impacts iSeries platforms. On these platforms, in BIG-IP (LTM, AAM, AFM, Analytics, APM, ASM, DNS, Edge Gateway, FPS, GTM, Link Controller, PEM, WebAccelerator) versions 14.0.0-14.1.0.1, 13.0.0-13.1.1.3, and 12.1.1 HF2-12.1.4, the secureKeyCapable attribute was not set which causes secure vault to not use the F5 hardware support to store the unit key. Instead the unit key is stored in plaintext on disk as would be the case for Z100 systems. Additionally this causes the unit key to be stored in UCS files taken on these platforms.
In BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.0.7, 12.1.0-12.1.3.5, 11.6.1-11.6.3.2, or 11.5.1-11.5.8 or Enterprise Manager 3.1.1, malformed requests to the Traffic Management User Interface (TMUI), also referred to as the BIG-IP Configuration utility, may lead to disruption of TMUI services. This attack requires an authenticated user with any role (other than the No Access role). The No Access user role cannot login and does not have the access level to perform the attack.
In BIG-IP 13.0.0-13.1.1.1, 12.1.0-12.1.3.7, 11.6.1-11.6.3.2, or 11.5.1-11.5.8 or Enterprise Manager 3.1.1, when authenticated administrative users run commands in the Traffic Management User Interface (TMUI), also referred to as the BIG-IP Configuration utility, restrictions on allowed commands may not be enforced.
On BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.1.3, 12.1.0-12.1.3.7, and 11.6.0-11.6.3.2, a reflected Cross Site Scripting (XSS) vulnerability is present in an undisclosed page of the BIG-IP TMUI (Traffic Management User Interface) also known as the BIG-IP configuration utility.
On F5 BIG-IP 13.0.0, 12.1.0-12.1.2, 11.6.0-11.6.3.1, or 11.2.1-11.5.6 a domain name cached within the DNS Cache of TMM may continue to be resolved by the cache even after the parent server revokes the record, if the DNS Cache is receiving a stream of requests for the cached name.
Through undisclosed methods, on F5 BIG-IP 13.0.0-13.1.0.7, 12.1.0-12.1.3.5, 11.6.0-11.6.3.1, or 11.2.1-11.5.6, adjacent network attackers can cause a denial of service for VCMP guest and host systems. Attack must be sourced from adjacent network (layer 2).
On F5 BIG-IP 13.0.0-13.0.1, 12.1.0-12.1.3.3, 11.6.0-11.6.3.1, or 11.5.1-11.5.6, Enterprise Manager 3.1.1, BIG-IQ Centralized Management 5.0.0-5.1.0, BIG-IQ Cloud and Orchestration 1.0.0, or F5 iWorkflow 2.1.0-2.3.0 the big3d process does not irrevocably minimize group privileges at start up.
On BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.1.1, or 12.1.0-12.1.3.7, or Enterprise Manager 3.1.1, when authenticated administrative users run commands in the Traffic Management User Interface (TMUI), also referred to as the BIG-IP Configuration utility, restrictions on allowed commands may not be enforced.
On BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.1.1, or 12.1.0-12.1.3.7, when a virtual server using the inflate functionality to process a gzip bomb as a payload, the BIG-IP system will experience a fatal error and may cause the Traffic Management Microkernel (TMM) to produce a core file.
Under certain conditions on F5 BIG-IP 13.1.0-13.1.0.5, 13.0.0, 12.1.0-12.1.3.1, 11.6.0-11.6.3.1, or 11.5.0-11.5.6, TMM may core while processing SSL forward proxy traffic.
On F5 BIG-IP 14.0.0, 13.0.0-13.1.0, 12.1.0-12.1.3, or 11.5.1-11.6.3 specifically crafted HTTP responses, when processed by a Virtual Server with an associated QoE profile that has Video enabled, may cause TMM to incorrectly buffer response data causing the TMM to restart resulting in a Denial of Service.
Under certain conditions on F5 BIG-IP 13.0.0, 12.1.0-12.1.2, 11.6.0-11.6.3.1, or 11.5.0-11.5.6, TMM may core while processing SSL forward proxy traffic.
Features in F5 BIG-IP 13.0.0-13.1.0.3, 12.1.0-12.1.3.1, 11.6.1-11.6.3.1, 11.5.1-11.5.5, or 11.2.1 system that utilizes inflate functionality directly, via an iRule, or via the inflate code from PEM module are subjected to a service disruption via a "Zip Bomb" attack.
An Information Disclosure vulnerability exists in NTP 4.2.7p25 private (mode 6/7) messages via a GETRESTRICT control message, which could let a malicious user obtain sensitive information.
racoon/gssapi.c in IPsec-Tools 0.8.2 allows remote attackers to cause a denial of service (NULL pointer dereference and IKE daemon crash) via a series of crafted UDP requests.
In some circumstances, an F5 BIG-IP version 12.0.0 to 12.1.2 and 13.0.0 Azure cloud instance may contain a default administrative password which could be used to remotely log into the BIG-IP system. The impacted administrative account is the Azure instance administrative user that was created at deployment. The root and admin accounts are not vulnerable. An attacker may be able to remotely access the BIG-IP host via SSH.
On BIG-IP 14.0.x, 13.x, 12.x, and 11.x, Enterprise Manager 3.1.1, BIG-IQ 6.x, 5.x, and 4.x, and iWorkflow 2.x, the passphrases for SNMPv3 users and trap destinations that are used for authentication and privacy are not handled by the BIG-IP system Secure Vault feature; they are written in the clear to the various configuration files.
On versions 11.2.1. and greater, unrestricted Snapshot File Access allows BIG-IP system's user with any role, including Guest Role, to have access and download previously generated and available snapshot files on the BIG-IP configuration utility such as QKView and TCPDumps.
When BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.0.5, 12.1.0-12.1.3.5, 11.6.0-11.6.3.2, or 11.2.1-11.5.6, BIG-IQ Centralized Management 5.0.0-5.4.0 or 4.6.0, BIG-IQ Cloud and Orchestration 1.0.0, iWorkflow 2.1.0-2.3.0, or Enterprise Manager 3.1.1 is licensed for Appliance Mode, Admin and Resource administrator roles can by-pass BIG-IP Appliance Mode restrictions to overwrite critical system files. Attackers of high privilege level are able to overwrite critical system files which bypasses security controls in place to limit TMSH commands. This is possible with an administrator or resource administrator roles when granted TMSH. Resource administrator roles must have TMSH access in order to perform this attack.
In BIG-IP 14.0.0-14.0.0.2 or 13.0.0-13.1.1.1, iControl and TMSH usage by authenticated users may leak a small amount of memory when executing commands
On BIG-IP 14.0.0-14.0.0.2 or 13.0.0-13.1.1.1, in certain circumstances, when processing traffic through a Virtual Server with an associated MQTT profile, the TMM process may produce a core file and take the configured HA action.
In BIG-IP 14.0.0-14.0.0.2 or 13.0.0-13.1.1.1 or Enterprise Manager 3.1.1, when authenticated administrative users run commands in the Traffic Management User Interface (TMUI), also referred to as the BIG-IP Configuration utility, restrictions on allowed commands may not be enforced.
On BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.0.7, 12.1.0-12.1.3.5, 11.6.0-11.6.3.2, or 11.2.1-11.5.6, BIG-IQ Centralized Management 6.0.0-6.0.1, 5.0.0-5.4.0 or 4.6.0, BIG-IQ Cloud and Orchestration 1.0.0, iWorkflow 2.0.1-2.3.0, or Enterprise Manager 3.1.1 a BIG-IP user granted with tmsh access may cause the BIG-IP system to experience denial-of-service (DoS) when the BIG-IP user uses the tmsh utility to run the edit cli preference command and proceeds to save the changes to another filename repeatedly. This action utilises storage space on the /var partition and when performed repeatedly causes the /var partition to be full.
On BIG-IP 14.0.0-14.0.0.2 or 13.0.0-13.1.1.1, undisclosed traffic patterns may lead to denial of service conditions for the BIG-IP system. The configuration which exposes this condition is the BIG-IP self IP address which is part of a VLAN group and has the Port Lockdown setting configured with anything other than "allow-all".
On BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.1.1, or 12.1.0-12.1.3.6, malicious requests made to virtual servers with an HTTP profile can cause the TMM to restart. The issue is exposed with the non-default "normalize URI" configuration options used in iRules and/or BIG-IP LTM policies.
In BIG-IP 14.0.0-14.0.0.2, 13.1.0.4-13.1.1.1, or 12.1.3.4-12.1.3.6, If an MPTCP connection receives an abort signal while the initial flow is not the primary flow, the initial flow will remain after the closing procedure is complete. TMM may restart and produce a core file as a result of this condition.
In BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.1.5, 12.1.0-12.1.4.1, and 11.2.1-11.6.3.2, an attacker sending specially crafted SSL records to a SSL Virtual Server will cause corruption in the SSL data structures leading to intermittent decrypt BADRECORDMAC errors. Clients will be unable to access the application load balanced by a virtual server with an SSL profile until tmm is restarted.
On BIG-IP versions 15.0.0-15.1.0, 14.0.0-14.1.2.3, 13.1.0-13.1.3.2, 12.1.0-12.1.5, and 11.5.2-11.6.5.1, BIG-IQ versions 7.0.0, 6.0.0-6.1.0, and 5.0.0-5.4.0, iWorkflow version 2.3.0, and Enterprise Manager version 3.1.1, authenticated users granted TMOS Shell (tmsh) privileges are able access objects on the file system which would normally be disallowed by tmsh restrictions. This allows for authenticated, low privileged attackers to access objects on the file system which would not normally be allowed.
The BIG-IP 15.0.0-15.0.1, 14.0.0-14.1.2.2, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.1-11.6.5.1, BIG-IQ 7.0.0, 6.0.0-6.1.0, and 5.2.0-5.4.0, iWorkflow 2.3.0, and Enterprise Manager 3.1.1 configuration utility is vulnerable to Anti DNS Pinning (DNS Rebinding) attack.