A flaw was found in GnuTLS, which relies on libtasn1 for ASN.1 data processing. Due to an inefficient algorithm in libtasn1, decoding certain DER-encoded certificate data can take excessive time, leading to increased resource consumption. This flaw allows a remote attacker to send a specially crafted certificate, causing GnuTLS to become unresponsive or slow, resulting in a denial-of-service condition.
In the Linux kernel, the following vulnerability has been resolved: perf/aux: Fix AUX buffer serialization Ole reported that event->mmapmutex is strictly insufficient to serialize the AUX buffer, add a per RB mutex to fully serialize it. Note that in the lock order comment the perfevent::mmapmutex order was already wrong, that is, it nesting under mmaplock is not new with this patch.
Issue summary: A timing side-channel which could potentially allow recovering the private key exists in the ECDSA signature computation. Impact summary: A timing side-channel in ECDSA signature computations could allow recovering the private key by an attacker. However, measuring the timing would require either local access to the signing application or a very fast network connection with low latency. There is a timing signal of around 300 nanoseconds when the top word of the inverted ECDSA nonce value is zero. This can happen with significant probability only for some of the supported elliptic curves. In particular the NIST P-521 curve is affected. To be able to measure this leak, the attacker process must either be located in the same physical computer or must have a very fast network connection with low latency. For that reason the severity of this vulnerability is Low. The FIPS modules in 3.4, 3.3, 3.2, 3.1 and 3.0 are affected by this issue.
Incorrect object re-cycling and re-use vulnerability in Apache Tomcat. Incorrect recycling of the request and response used by HTTP/2 requests could lead to request and/or response mix-up between users. This issue affects Apache Tomcat: from 11.0.0-M23 through 11.0.0-M26, from 10.1.27 through 10.1.30, from 9.0.92 through 9.0.95. Users are recommended to upgrade to version 11.0.0, 10.1.31 or 9.0.96, which fixes the issue.
Incorrect object recycling and reuse vulnerability in Apache Tomcat. This issue affects Apache Tomcat: 11.0.0, 10.1.31, 9.0.96. Users are recommended to upgrade to version 11.0.1, 10.1.32 or 9.0.97, which fixes the issue.
An issue was discovered in Qt before 5.15.14, 6.x before 6.2.9, and 6.3.x through 6.5.x before 6.5.1. Qt Network incorrectly parses the strict-transport-security (HSTS) header, allowing unencrypted connections to be established, even when explicitly prohibited by the server. This happens if the case used for this header does not exactly match.
An issue was discovered in Qt before 5.15.15, 6.x before 6.2.9, and 6.3.x through 6.5.x before 6.5.2. Certificate validation for TLS does not always consider whether the root of a chain is a configured CA certificate.
In Qt before 5.15.14, 6.0.x through 6.2.x before 6.2.9, and 6.3.x through 6.5.x before 6.5.1, QtSvg QSvgFont munitsPerEm initialization is mishandled.
In the Linux kernel, the following vulnerability has been resolved: netfilter: tproxy: bail out if IP has been disabled on the device syzbot reports: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] [..] RIP: 0010:nftproxyladdr4+0xb7/0x340 net/ipv4/netfilter/nftproxyipv4.c:62 Call Trace: nfttproxyevalv4 net/netfilter/nfttproxy.c:56 [inline] nfttproxyeval+0xa9a/0x1a00 net/netfilter/nfttproxy.c:168 indevgetrcu() can return NULL, so check for this.
Description: The fix for improvement 69333 caused pooled JSP tags not to be released after use which in turn could cause output of some tags not to escaped as expected. This unescaped output could lead to XSS.
Versions Affected: - Apache Tomcat 11.0.0 - Apache Tomcat 10.1.31 - Apache Tomcat 9.0.96
Mitigation: Users of the affected versions should apply one of the following mitigations: - Upgrade to Apache Tomcat 11.0.1 or later - Upgrade to Apache Tomcat 10.1.33 or later Note: 10.1.32 was not released - Upgrade to Apache Tomcat 9.0.97 or later
Incorrect object re-cycling and re-use vulnerability in Apache Tomcat. Incorrect recycling of the request and response used by HTTP/2 requests could lead to request and/or response mix-up between users.
This issue affects Apache Tomcat: from 11.0.0-M23 through 11.0.0-M26, from 10.1.27 through 10.1.30, from 9.0.92 through 9.0.95.
Users are recommended to upgrade to version 11.0.0, 10.1.31 or 9.0.96, which fixes the issue.
libarchive version commit 9693801580c0cf7c70e862d305270a16b52826a7 onwards (release v3.2.0 onwards) contains a CWE-20: Improper Input Validation vulnerability in WARC parser - libarchive/archivereadsupportformatwarc.c, warcread() that can result in DoS - quasi-infinite run time and disk usage from tiny file. This attack appear to be exploitable via the victim must open a specially crafted WARC file.
Jinja is an extensible templating engine. Special placeholders in the template allow writing code similar to Python syntax. It is possible to inject arbitrary HTML attributes into the rendered HTML template, potentially leading to Cross-Site Scripting (XSS). The Jinja xmlattr filter can be abused to inject arbitrary HTML attribute keys and values, bypassing the auto escaping mechanism and potentially leading to XSS. It may also be possible to bypass attribute validation checks if they are blacklist-based.
Jinja is an extensible templating engine. The xmlattr filter in affected versions of Jinja accepts keys containing non-attribute characters. XML/HTML attributes cannot contain spaces, /, >, or =, as each would then be interpreted as starting a separate attribute. If an application accepts keys (as opposed to only values) as user input, and renders these in pages that other users see as well, an attacker could use this to inject other attributes and perform XSS. The fix for CVE-2024-22195 only addressed spaces but not other characters. Accepting keys as user input is now explicitly considered an unintended use case of the xmlattr filter, and code that does so without otherwise validating the input should be flagged as insecure, regardless of Jinja version. Accepting values as user input continues to be safe. This vulnerability is fixed in 3.1.4.
Requests is a HTTP library. Prior to 2.32.0, when making requests through a Requests Session, if the first request is made with verify=False to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of verify. This behavior will continue for the lifecycle of the connection in the connection pool. This vulnerability is fixed in 2.32.0.
c-ares is a C library for asynchronous DNS requests. aresreadline() is used to parse local configuration files such as /etc/resolv.conf, /etc/nsswitch.conf, the HOSTALIASES file, and if using a c-ares version prior to 1.27.0, the /etc/hosts file. If any of these configuration files has an embedded NULL character as the first character in a new line, it can lead to attempting to read memory prior to the start of the given buffer which may result in a crash. This issue is fixed in c-ares 1.27.0. No known workarounds exist.
nscd: netgroup cache may terminate daemon on memory allocation failure The Name Service Cache Daemon's (nscd) netgroup cache uses xmalloc or xrealloc and these functions may terminate the process due to a memory allocation failure resulting in a denial of service to the clients. The flaw was introduced in glibc 2.15 when the cache was added to nscd. This vulnerability is only present in the nscd binary.
CVE-2024-28834 A flaw was found in GnuTLS. The Minerva attack is a cryptographic vulnerability that exploits deterministic behavior in systems like GnuTLS, leading to side-channel leaks. In specific scenarios, such as when using the GNUTLSPRIVKEYFLAGREPRODUCIBLE flag, it can result in a noticeable step in nonce size from 513 to 512 bits, exposing a potential timing side-channel. CVE-2024-28835 A flaw has been discovered in GnuTLS where an application crash can be induced when attempting to verify a specially crafted .pem bundle using the "certtool --verify-chain" command.
libjpeg-turbo before 1.3.1 allows remote attackers to cause a denial of service (crash) via a crafted JPEG file, related to the Exif marker.
Libarchive through 3.6.2 can cause directories to have world-writable permissions. The umask() call inside archivewritediskposix.c changes the umask of the whole process for a very short period of time; a race condition with another thread can lead to a permanent umask 0 setting. Such a race condition could lead to implicit directory creation with permissions 0777 (without the sticky bit), which means that any low-privileged local user can delete and rename files inside those directories.
In libarchive before 3.6.2, the software does not check for an error after calling calloc function that can return with a NULL pointer if the function fails, which leads to a resultant NULL pointer dereference. NOTE: the discoverer cites this CWE-476 remark but third parties dispute the code-execution impact: "In rare circumstances, when NULL is equivalent to the 0x0 memory address and privileged code can access it, then writing or reading memory is possible, which may lead to code execution."
Encoding problem in modproxy in Apache HTTP Server 2.4.59 and earlier allows request URLs with incorrect encoding to be sent to backend services, potentially bypassing authentication via crafted requests. Users are recommended to upgrade to version 2.4.60, which fixes this issue.
In the Linux kernel, the following vulnerability has been resolved: sched/membarrier: reduce the ability to hammer on sysmembarrier On some systems, sysmembarrier can be very expensive, causing overall slowdowns for everything. So put a lock on the path in order to serialize the accesses to prevent the ability for this to be called at too high of a frequency and saturate the machine.
Issue summary: Calling the OpenSSL API function SSLfreebuffers may cause memory to be accessed that was previously freed in some situations Impact summary: A use after free can have a range of potential consequences such as the corruption of valid data, crashes or execution of arbitrary code. However, only applications that directly call the SSLfreebuffers function are affected by this issue. Applications that do not call this function are not vulnerable. Our investigations indicate that this function is rarely used by applications. The SSLfreebuffers function is used to free the internal OpenSSL buffer used when processing an incoming record from the network. The call is only expected to succeed if the buffer is not currently in use. However, two scenarios have been identified where the buffer is freed even when still in use. The first scenario occurs where a record header has been received from the network and processed by OpenSSL, but the full record body has not yet arrived. In this case calling SSLfreebuffers will succeed even though a record has only been partially processed and the buffer is still in use. The second scenario occurs where a full record containing application data has been received and processed by OpenSSL but the application has only read part of this data. Again a call to SSLfreebuffers will succeed even though the buffer is still in use. While these scenarios could occur accidentally during normal operation a malicious attacker could attempt to engineer a stituation where this occurs. We are not aware of this issue being actively exploited. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.
NSS was susceptible to a timing side-channel attack when performing RSA decryption. This attack could potentially allow an attacker to recover the private data. This vulnerability affects Firefox < 124, Firefox ESR < 115.9, and Thunderbird < 115.9.
A Speculative Race Condition (SRC) vulnerability that impacts modern CPU architectures supporting speculative execution (related to Spectre V1) has been disclosed. An unauthenticated attacker can exploit this vulnerability to disclose arbitrary data from the CPU using race conditions to access the speculative executable code paths.
Xmlsoft Libxml2 v2.11.0 was discovered to contain an out-of-bounds read via the xmlSAX2StartElement() function at /libxml2/SAX2.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via supplying a crafted XML file. NOTE: the vendor's position is that the product does not support the legacy SAX1 interface with custom callbacks; there is a crash even without crafted input.
In ssh in OpenSSH before 9.6, OS command injection might occur if a user name or host name has shell metacharacters, and this name is referenced by an expansion token in certain situations. For example, an untrusted Git repository can have a submodule with shell metacharacters in a user name or host name.
Libarchive through 3.6.2 can cause directories to have world-writable permissions. The umask() call inside archivewritediskposix.c changes the umask of the whole process for a very short period of time; a race condition with another thread can lead to a permanent umask 0 setting. Such a race condition could lead to implicit directory creation with permissions 0777 (without the sticky bit), which means that any low-privileged local user can delete and rename files inside those directories.
An issue was discovered in Qt before 5.15.14, 6.x before 6.2.9, and 6.3.x through 6.5.x before 6.5.1. Qt Network incorrectly parses the strict-transport-security (HSTS) header, allowing unencrypted connections to be established, even when explicitly prohibited by the server. This happens if the case used for this header does not exactly match.