A NULL Pointer Dereference vulnerability in the management daemon (mgd) of Juniper Networks Junos OS and Junos OS Evolved allows a local, high-privileged attacker setting or deactivating a specific SSH configuration parameter to create a Denial of Service (DoS).

A local high-privileged user configuring or deactivating a specific 'system services ssh' configuration parameter can exploit a null pointer dereference in one of the functions used by SSH. The function attempts to dereference a null pointer when accessing certain configuration data, resulting in an mgd process crash and restart. Continued execution of these configuration commands will create a sustained Denial of Service (DoS) condition.

This issue affects: Junos OS:

from 22.3 before 22.3R3-S5; from 22.4 before 22.4R3-S10; from 23.2 before 23.2R2-S7; from 23.4 before 23.4R2-S8.

This issue does not affect Junos OS before 22.3R1.

Junos OS Evolved: from 22.3R1-EVO before 23.2R2-S7-EVO; from 23.4 before 23.4R2-S8-EVO.

This issue does not affect Junos OS Evolved before 22.3R1-EVO.

A Missing Authentication for Critical Function vulnerability in command processing of Juniper Networks Junos OS allows a privileged local attacker to gain access to Linux-based line cards as root.

This issue affects systems running Junos OS using Linux-based line cards. Affected line cards include: MPC7, MPC8, MPC9, MPC10, MPC11 LC2101, LC2103 LC480, LC4800, LC9600 MX304 (built-in FPC) MX-SPC3 SRX5K-SPC3 EX9200-40XS

FPC3-PTX-U2, FPC3-PTX-U3 FPC3-SFF-PTX LC1101, LC1102, LC1104, LC1105

This issue affects Junos OS:

all versions before 22.4R3-S8,  from 23.2 before 23.2R2-S6,  from 23.4 before 23.4R2-S6,  from 24.2 before 24.2R2-S3,  from 24.4 before 24.4R2, from 25.2 before 25.2R2.

An Out-of-bounds Write vulnerability in the SNMP daemon (snmpd) of Juniper Networks Junos OS and Junos OS Evolved allows an authenticated network-based attacker sending specific valid SNMPv3 queries to trigger a memory leak. Over time, continuous receipt of these queries will result in snmpd process memory exhaustion, resulting in a process crash and restart, impacting the ability to monitor the system via SNMP.

Memory usage can be monitored using the following command:

user@device> show system processes extensive | match snmpd

This issue affects:

Junos OS:

all versions before 21.2R3-S8; from 21.4 before 21.4R3-S7; from 22.1 before 22.1R3-S6; from 22.2 before 22.2R3-S4; from 22.3 before 22.3R3-S3; from 22.4 before 22.4R3-S2; from 23.2 before 23.2R2; from 23.4 before 23.4R2.

Junos OS Evolved: all versions before 21.2R3-S8-EVO; from 21.4 before 21.4R3-S7-EVO; all versions of 22.1-EVO, from 22.2 before 22.2R3-S4-EVO; from 22.3 before 22.3R3-S3-EVO; all versions of 22.4-EVO, from 23.2 before 23.2R2-EVO; from 23.4 before 23.4R2-EVO.

An Incorrect Authorization vulnerability in the web server of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to reach the

Juniper Web Device Manager

(J-Web).

When Juniper Secure connect (JSC) is enabled on specific interfaces, or multiple interfaces are configured for J-Web, the J-Web UI is reachable over more than the intended interfaces. This issue affects Junos OS:

all versions before 21.4R3-S9, 22.2 versions before 22.2R3-S5, 22.4 versions before 22.4R3-S5, 23.2 versions before 23.2R2-S3, 23.4 versions before 23.4R2-S5, 24.2 versions before 24.2R2.

An Improper Isolation or Compartmentalization vulnerability in the kernel of Juniper Networks Junos OS allows a local attacker with high privileges to compromise the integrity of the device.

A local attacker with access to the shell is able to inject arbitrary code which can compromise an affected device. This issue is not exploitable from the Junos CLI. This issue affects Junos OS:

All versions before 21.2R3-S9, 21.4 versions before 21.4R3-S10,  22.2 versions before 22.2R3-S6,  22.4 versions before 22.4R3-S6,  23.2 versions before 23.2R2-S3,  23.4 versions before 23.4R2-S4, 24.2 versions before 24.2R1-S2, 24.2R2.

A Missing Authentication for Critical Function vulnerability combined with a Generation of Error Message Containing Sensitive Information vulnerability in J-Web of Juniper Networks Junos OS on SRX Series and EX Series allows an unauthenticated, network-based attacker to access sensitive system information.

When a user logs in, a temporary file which contains the configuration of the device (as visible to that user) is created in the /cache folder. An unauthenticated attacker can then attempt to access such a file by sending a specific request to the device trying to guess the name of such a file. Successful exploitation will reveal configuration information.

This issue affects Juniper Networks Junos OS on SRX Series and EX Series: All versions earlier than 20.4R3-S9; 21.2 versions earlier than 21.2R3-S7; 21.3 versions earlier than 21.3R3-S5; 21.4 versions earlier than 21.4R3-S6; 22.1 versions earlier than 22.1R3-S5; 22.2 versions earlier than 22.2R3-S3; 22.3 versions earlier than 22.3R3-S2; 22.4 versions earlier than 22.4R3; 23.2 versions earlier than 23.2R1-S2, 23.2R2.

An Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in J-Web of Juniper Networks Junos OS on SRX Series and EX Series allows an attacker to construct a URL that when visited by another user enables the attacker to execute commands with the target's permissions, including an administrator.

A specific invocation of the emitdebugnote method in webauthoperation.php will echo back the data it receives.

This issue affects Juniper Networks Junos OS on SRX Series and EX Series: All versions earlier than 20.4R3-S10; 21.2 versions earlier than 21.2R3-S8; 21.4 versions earlier than 21.4R3-S6; 22.1 versions earlier than 22.1R3-S5; 22.2 versions earlier than 22.2R3-S3; 22.3 versions earlier than 22.3R3-S2; 22.4 versions earlier than 22.4R3-S1; 23.2 versions earlier than 23.2R2; 23.4 versions earlier than 23.4R2.

An Improper Validation of Syntactic Correctness of Input vulnerability in Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to cause Denial of Service (DoS).

On all Junos OS MX Series and SRX Series platforms, when SIP ALG is enabled, and a specific SIP packet is received and processed, NAT IP allocation fails for genuine traffic, which causes Denial of Service (DoS). Continuous receipt of this specific SIP ALG packet will cause a sustained DoS condition.

NAT IP usage can be monitored by running the following command.

user@srx> show security nat resource-usage source-pool <sourcepoolname>

Pool name: sourcepoolname .. Address Factor-index Port-range Used Avail Total Usage X.X.X.X 0 Single Ports 50258 52342 62464 96% <<<<< - Alg Ports 0 2048 2048 0% This issue affects:

Juniper Networks Junos OS on MX Series and SRX Series

All versions earlier than 21.2R3-S6; 21.3 versions earlier than 21.3R3-S5; 21.4 versions earlier than 21.4R3-S5; 22.1 versions earlier than 22.1R3-S4; 22.2 versions earlier than 22.2R3-S3; 22.3 versions earlier than 22.3R3-S1; 22.4 versions earlier than 22.4R2-S2, 22.4R3; 23.2 versions earlier than 23.2R1-S1, 23.2R2.

An Unsupported Feature in the UI vulnerability in Juniper Networks Junos OS on MX Series and EX9200 Series allows an unauthenticated, network-based attacker to cause partial impact to the integrity of the device.

If the "tcp-reset" option is added to the "reject" action in an IPv6 filter which matches on "payload-protocol", packets are permitted instead of rejected. This happens because the payload-protocol match criteria is not supported in the kernel filter causing it to accept all packets without taking any other action. As a fix the payload-protocol match will be treated the same as a "next-header" match to avoid this filter bypass.

This issue doesn't affect IPv4 firewall filters.

This issue affects Juniper Networks Junos OS on MX Series and EX9200 Series:

All versions earlier than 20.4R3-S7; 21.1 versions earlier than 21.1R3-S5; 21.2 versions earlier than 21.2R3-S5; 21.3 versions earlier than 21.3R3-S4; 21.4 versions earlier than 21.4R3-S4; 22.1 versions earlier than 22.1R3-S2; 22.2 versions earlier than 22.2R3-S2; 22.3 versions earlier than 22.3R2-S2, 22.3R3; 22.4 versions earlier than 22.4R1-S2, 22.4R2-S2, 22.4R3.

A Double Free vulnerability in the flow processing daemon (flowd) of Juniper Networks Junos OS on SRX Series allows a network-based, unauthenticated attacker to cause a Denial of Service (DoS).

In a remote access VPN scenario, if a "tcp-encap-profile" is configured and a sequence of specific packets is received, a flowd crash and restart will be observed.

This issue affects Juniper Networks Junos OS on SRX Series:

All versions earlier than 20.4R3-S8; 21.2 versions earlier than 21.2R3-S6; 21.3 versions earlier than 21.3R3-S5; 21.4 versions earlier than 21.4R3-S5; 22.1 versions earlier than 22.1R3-S3; 22.2 versions earlier than 22.2R3-S3; 22.3 versions earlier than 22.3R3-S1; 22.4 versions earlier than 22.4R2-S2, 22.4R3.

A Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability in the Flow-processing Daemon (flowd) of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (Dos).

On SRX Series devices when two different threads try to simultaneously process a queue which is used for TCP events flowd will crash. One of these threads can not be triggered externally, so the exploitation of this race condition is outside the attackers direct control.

Continued exploitation of this issue will lead to a sustained DoS.

This issue affects Juniper Networks Junos OS:

21.2 versions earlier than 21.2R3-S5; 21.3 versions earlier than 21.3R3-S5; 21.4 versions earlier than 21.4R3-S4; 22.1 versions earlier than 22.1R3-S3; 22.2 versions earlier than 22.2R3-S1; 22.3 versions earlier than 22.3R2-S2, 22.3R3; 22.4 versions earlier than 22.4R2-S1, 22.4R3.

This issue does not affect Juniper Networks Junos OS versions earlier than 21.2R1.

A Heap-based Buffer Overflow vulnerability in the Routing Protocol Daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network based attacker to cause a Denial of Service (DoS).

If an attacker sends a specific BGP UPDATE message to the device, this will cause a memory overwrite and therefore an RPD crash and restart in the backup Routing Engine (RE). Continued receipt of these packets will cause a sustained Denial of Service (DoS) condition in the backup RE.

The primary RE is not impacted by this issue and there is no impact on traffic.

This issue only affects devices with NSR enabled.

Note: NSR is not supported on the SRX Series and is therefore not affected by this vulnerability. This issue requires an attacker to have an established BGP session to a system affected by the issue. This issue affects both eBGP and iBGP implementations.

This issue affects:

Juniper Networks Junos OS

All versions earlier than 20.4R3-S9; 21.2 versions earlier than 21.2R3-S7; 21.3 versions earlier than 21.3R3-S5; 21.4 versions earlier than 21.4R3-S5; 22.1 versions earlier than 22.1R3-S4; 22.2 versions earlier than 22.2R3-S2; 22.3 versions earlier than 22.3R3-S1; 22.4 versions earlier than 22.4R2-S2, 22.4R3; 23.1 versions earlier than 23.1R2; 23.2 versions earlier than 23.2R1-S2, 23.2R2.

Juniper Networks Junos OS Evolved

All versions earlier than 21.3R3-S5-EVO; 21.4-EVO versions earlier than 21.4R3-S5-EVO; 22.1-EVO versions earlier than 22.1R3-S4-EVO; 22.2-EVO versions earlier than 22.2R3-S2-EVO; 22.3-EVO versions later than 22.3R1-EVO; 22.4-EVO versions earlier than 22.4R2-S2-EVO, 22.4R3-EVO; 23.1-EVO versions earlier than 23.1R2-EVO; 23.2-EVO versions earlier than 23.2R1-S2-EVO, 23.2R2-EVO.

An Out-of-bounds Write vulnerability in J-Web of Juniper Networks Junos OS on SRX Series and EX Series allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS), or Remote Code Execution (RCE) and obtain root privileges on the device.

This issue is caused by use of an insecure function allowing an attacker to overwrite arbitrary memory.

This issue affects Juniper Networks Junos OS SRX Series and EX Series:

Junos OS versions earlier than 20.4R3-S9; Junos OS 21.2 versions earlier than 21.2R3-S7; Junos OS 21.3 versions earlier than 21.3R3-S5; Junos OS 21.4 versions earlier than 21.4R3-S5; Junos OS 22.1 versions earlier than 22.1R3-S4; Junos OS 22.2 versions earlier than 22.2R3-S3; Junos OS 22.3 versions earlier than 22.3R3-S2; Junos OS 22.4 versions earlier than 22.4R2-S2, 22.4R3.

An Improper Handling of Exceptional Conditions vulnerability in the broadband edge subscriber management daemon (bbe-smgd) of Juniper Networks Junos OS on MX Series allows an attacker directly connected to the vulnerable system who repeatedly flaps DHCP subscriber sessions to cause a slow memory leak, ultimately leading to a Denial of Service (DoS). Memory can only be recovered by manually restarting bbe-smgd.

This issue only occurs if BFD liveness detection for DHCP subscribers is enabled. Systems without BFD liveness detection enabled are not vulnerable to this issue.

Indication of the issue can be observed by periodically executing the 'show system processes extensive' command, which will indicate an increase in memory allocation for bbe-smgd. A small amount of memory is leaked every time a DHCP subscriber logs in, which will become visible over time, ultimately leading to memory starvation.

user@junos> show system processes extensive | match bbe-smgd 13071 root 24 0 415M 201M select 0 0:41 7.28% bbe-smgd{bbe-smgd} 13071 root 20 0 415M 201M select 1 0:04 0.00% bbe-smgd{bbe-smgd} ... user@junos> show system processes extensive | match bbe-smgd 13071 root 20 0 420M 208M select 0 4:33 0.10% bbe-smgd{bbe-smgd} 13071 root 20 0 420M 208M select 0 0:12 0.00% bbe-smgd{bbe-smgd} ... This issue affects Juniper Networks Junos OS on MX Series:

All versions earlier than 20.4R3-S9; 21.2 versions earlier than 21.2R3-S7; 21.3 versions earlier than 21.3R3-S5; 21.4 versions earlier than 21.4R3-S5; 22.1 versions earlier than 22.1R3-S4; 22.2 versions earlier than 22.2R3-S3; 22.3 versions earlier than 22.3R3-S2; 22.4 versions earlier than 22.4R2-S2, 22.4R3; 23.2 versions earlier than 23.2R1-S1, 23.2R2.

An Improper Handling of Exceptional Conditions vulnerability in BGP session processing of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated network-based attacker, using specific timing outside the attacker's control, to flap BGP sessions and cause the routing protocol daemon (rpd) process to crash and restart, leading to a Denial of Service (DoS) condition. Continued BGP session flapping will create a sustained Denial of Service (DoS) condition.

This issue only affects routers configured with non-stop routing (NSR) enabled. Graceful Restart (GR) helper mode, enabled by default, is also required for this issue to be exploitable.

Note: NSR is not supported on the SRX Series and is therefore not affected by this vulnerability. When the BGP session flaps on the NSR-enabled router, the device enters GR-helper/LLGR-helper mode due to the peer having negotiated GR/LLGR-restarter capability and the backup BGP requests for replication of the GR/LLGR-helper session, master BGP schedules, and initiates replication of GR/LLGR stale routes to the backup BGP. In this state, if the BGP session with the BGP peer comes up again, unsolicited replication is initiated for the peer without cleaning up the ongoing GR/LLGR-helper mode replication. This parallel two instances of replication for the same peer leads to the assert if the BGP session flaps again.

This issue affects:

Juniper Networks Junos OS

All versions earlier than 20.4R3-S9; 21.2 versions earlier than 21.2R3-S7; 21.3 versions earlier than 21.3R3-S5; 21.4 versions earlier than 21.4R3-S5; 22.1 versions earlier than 22.1R3-S4; 22.2 versions earlier than 22.2R3-S3; 22.3 versions earlier than 22.3R3-S1; 22.4 versions earlier than 22.4R2-S2, 22.4R3; 23.2 versions earlier than 23.2R1-S1, 23.2R2.

Juniper Networks Junos OS Evolved

All versions earlier than 21.3R3-S5-EVO; 21.4 versions earlier than 21.4R3-S5-EVO; 22.1 versions earlier than 22.1R3-S4-EVO; 22.2 versions earlier than 22.2R3-S3-EVO; 22.3 versions earlier than 22.3R3-S1-EVO; 22.4 versions earlier than 22.4R2-S2-EVO, 22.4R3-EVO; 23.2 versions earlier than 23.2R1-S1-EVO, 23.2R2-EVO.

A Missing Authentication for Critical Function vulnerability in Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause limited impact to the file system integrity.

With a specific request to

webauthoperation.php

that doesn't require authentication, an attacker is able to upload and download arbitrary files via J-Web, leading to a loss of

integrity or confidentiality, which may allow chaining to other vulnerabilities.

This issue affects Juniper Networks Junos OS on SRX Series:

21.2 versions prior to 21.2R3-S8; 21.4

versions prior to

21.4R3-S6; 22.1

versions prior to

22.1R3-S5; 22.2

versions prior to

22.2R3-S3; 22.3

versions prior to

22.3R3-S2; 22.4 versions prior to 22,4R2-S2, 22.4R3; 23.2 versions prior to

23.2R1-S2, 23.2R2.

A Missing Authentication for Critical Function vulnerability in Juniper Networks Junos OS on EX Series allows an unauthenticated, network-based attacker to cause limited impact to the file system integrity.

With a specific request to installAppPackage.php that doesn't require authentication an attacker is able to upload arbitrary files via J-Web, leading to a loss of

integrity

for a certain

part of the file system, which may allow chaining to other vulnerabilities.

This issue affects Juniper Networks Junos OS on EX Series:

All versions prior to 20.4R3-S8; 21.1 versions 21.1R1 and later; 21.2 versions prior to 21.2R3-S6; 21.3 versions

prior to

21.3R3-S5; 21.4 versions

prior to

21.4R3-S4; 22.1 versions

prior to

22.1R3-S3; 22.2 versions

prior to

22.2R3-S1; 22.3 versions

prior to

22.3R2-S2, 22.3R3; 22.4 versions

prior to

22.4R2-S1, 22.4R3.

A PHP External Variable Modification vulnerability in J-Web of Juniper Networks Junos OS on EX Series allows an unauthenticated, network-based attacker to control certain, important environment variables.

Using a crafted request an attacker is able to modify

certain PHP environment variables leading to partial loss of integrity, which may allow chaining to other vulnerabilities. This issue affects Juniper Networks Junos OS on EX Series:

All versions prior to 20.4R3-S9; 21.1 versions 21.1R1 and later; 21.2 versions prior to 21.2R3-S7; 21.3 versions

prior to

21.3R3-S5; 21.4 versions

prior to

21.4R3-S5; 22.1 versions

prior to

22.1R3-S4; 22.2 versions

prior to

22.2R3-S2; 22.3 versions

prior to 22.3R3-S1; 22.4 versions

prior to

22.4R2-S2, 22.4R3; 23.2 versions prior to

23.2R1-S1, 23.2R2.

A PHP External Variable Modification vulnerability in J-Web of Juniper Networks Junos OS on EX Series

and SRX Series

allows an unauthenticated, network-based attacker to remotely execute code.

Using a crafted request which sets the variable PHPRC an attacker is able to modify the PHP execution environment allowing the injection und execution of code.

This issue affects Juniper Networks Junos OS on EX Series

and

SRX Series:

All versions prior to

20.4R3-S9; 21.1 versions 21.1R1 and later; 21.2 versions prior to 21.2R3-S7; 21.3 versions prior to 21.3R3-S5; 21.4 versions prior to 21.4R3-S5; 22.1 versions

prior to

22.1R3-S4; 22.2 versions

prior to

22.2R3-S2; 22.3 versions

prior to

22.3R2-S2, 22.3R3-S1; 22.4 versions

prior to

22.4R2-S1, 22.4R3; 23.2 versions prior to 23.2R1-S1, 23.2R2.

A Missing Authentication for Critical Function vulnerability in Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause limited impact to the file system integrity.

With a specific request to user.php that doesn't require authentication an attacker is able to upload arbitrary files via J-Web, leading to a loss of

integrity

for a certain

part of the file system, which may allow chaining to other vulnerabilities.

This issue affects Juniper Networks Junos OS on SRX Series:

All versions prior to 20.4R3-S8; 21.1 versions 21.1R1 and later; 21.2 versions prior to 21.2R3-S6; 21.3 versions

prior to

21.3R3-S5; 21.4 versions

prior to

21.4R3-S5; 22.1 versions

prior to

22.1R3-S3; 22.2 versions

prior to

22.2R3-S2; 22.3 versions

prior to

22.3R2-S2, 22.3R3; 22.4 versions

prior to

22.4R2-S1, 22.4R3.

An OS Command Injection vulnerability in the CLI processing of Juniper Networks Junos OS and Junos OS Evolved allows a local, high-privileged attacker executing specific, crafted CLI commands to inject arbitrary shell commands as root, leading to a complete compromise of the system.

Certain 'set system' commands, when executed with crafted arguments, are not properly sanitized, allowing for arbitrary shell injection. These shell commands are executed as root, potentially allowing for complete control of the vulnerable system. This issue affects:

Junos OS:

all versions before 22.4R3-S8,  from 23.2 before 23.2R2-S5,  from 23.4 before 23.4R2-S7,  from 24.2 before 24.2R2-S2,  from 24.4 before 24.4R2,  from 25.2 before 25.2R2;

Junos OS Evolved:

all versions before 22.4R3-S8-EVO,  from 23.2 before 23.2R2-S5-EVO,  from 23.4 before 23.4R2-S7-EVO,  from 24.2 before 24.2R2-S2-EVO,  from 24.4 before 24.4R2-EVO,  from 25.2 before 25.2R1-S1-EVO, 25.2R2-EVO.

A Missing Release of Memory after Effective Lifetime vulnerability in the Layer 2 Address Learning Daemon (l2ald) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent, unauthenticated attacker to cause a memory leak ultimately leading to a Denial of Service (DoS).

In an EVPN-MPLS scenario, routes learned from remote multi-homed Provider Edge (PE) devices are programmed as ESI routes. Due to a logic issue in the l2ald memory management, memory allocated for these routes is not released when there is churn for these routes. As a result, memory leaks in the l2ald process which will ultimately lead to a crash and restart of l2ald.

Use the following command to monitor the memory consumption by l2ald:

user@device> show system process extensive | match "PID|l2ald"

This issue affects:

Junos OS:

all versions before 22.4R3-S5, 23.2 versions before 23.2R2-S3, 23.4 versions before 23.4R2-S4, 24.2 versions before 24.2R2;

Junos OS Evolved:

all versions before 22.4R3-S5-EVO, 23.2 versions before 23.2R2-S3-EVO, 23.4 versions before 23.4R2-S4-EVO, 24.2 versions before 24.2R2-EVO.

A Missing Release of Memory after Effective Lifetime vulnerability in the BroadBand Edge subscriber management daemon (bbe-smgd) of Juniper Networks Junos OS on MX Series allows an adjacent, unauthenticated attacker to cause a Denial of Service (DoS).

If the authentication packet-type option is configured and a received packet does not match that packet type, the memory leak occurs. When all memory

available to bbe-smgd has been consumed, no new subscribers will be able to login.

The memory utilization of bbe-smgd can be monitored with the following show command:

user@host> show system processes extensive | match bbe-smgd

The below log message can be observed when this limit has been reached:

bbesmgd[<PID>]: %DAEMON-3-SMDDPROFRSMONERROR: Resource unavailability, Reason: Daemon Heap Memory exhaustion

This issue affects Junos OS on MX Series: all versions before 22.4R3-S8, 23.2 versions before 23.2R2-S5, 23.4 versions before 23.4R2-S6, 24.2 versions before 24.2R2-S2, 24.4 versions before 24.4R2, 25.2 versions before 25.2R2.

A Missing Release of Memory after Effective Lifetime vulnerability in the DHCP daemon (jdhcpd) of Juniper Networks Junos OS on MX Series, allows an adjacent, unauthenticated attacker to cause a memory leak, that will eventually cause a complete Denial-of-Service (DoS).

In a DHCPv6 over PPPoE, or DHCPv6 over VLAN with Active lease query or Bulk lease query scenario, every subscriber logout will leak a small amount of memory. When all available memory has been exhausted, jdhcpd will crash and restart which causes a complete service impact until the process has recovered.

The memory usage of jdhcpd can be monitored with:

user@host> show system processes extensive | match jdhcpd

This issue affects Junos OS:

all versions before 22.4R3-S1, 23.2 versions before 23.2R2, 23.4 versions before 23.4R2.

An Improper Validation of Syntactic Correctness of Input vulnerability in the IPsec library used by kmd and iked of Juniper Networks Junos OS on SRX Series and MX Series allows an unauthenticated, network-based attacker to cause a complete Denial-of-Service (DoS).

If an affected device receives a specifically malformed first ISAKMP packet from the initiator, the kmd/iked process will crash and restart, which momentarily prevents new security associations (SAs) for from being established. Repeated exploitation of this vulnerability causes a complete inability to establish new VPN connections.

This issue affects Junos OS on

SRX Series and MX Series:

all versions before 22.4R3-S9, 23.2 version before 23.2R2-S6, 23.4 version before 23.4R2-S7, 24.2 versions before 24.2R2-S4, 24.4 versions before 24.4R2-S3, 25.2 versions before 25.2R1-S2, 25.2R2.

An Improper Following of a Certificate's Chain of Trust vulnerability in J-Web of Juniper Networks Junos OS on SRX Series allows a PITM to intercept the communication of the device and get access to confidential information and potentially modify it.

When an SRX device is provisioned to connect to Security Director (SD) cloud, it doesn't perform sufficient verification of the received server certificate. This allows a PITM to intercept the communication between the SRX and SD cloud and access credentials and other sensitive information.

This issue affects Junos OS: all versions before 22.4R3-S9, 23.2 versions before 23.2R2-S6, 23.4 versions before 23.4R2-S7, 24.2 versions before 24.2R2-S3, 24.4 versions before 24.4R2-S2, 25.2 versions before 25.2R1-S2, 25.2R2.

An Improper Check for Unusual or Exceptional Conditions vulnerability in the flow daemon (flowd) of Juniper Networks Junos OS on SRX Series allows an attacker sending a specific, malformed ICMPv6 packet to cause the srxpfe process to crash and restart. Continued receipt and processing of these packets will repeatedly crash the srxpfe process and sustain the Denial of Service (DoS) condition.

During NAT64 translation, receipt of a specific, malformed ICMPv6 packet destined to the device will cause the srxpfe process to crash and restart.

This issue cannot be triggered using IPv4 nor other IPv6 traffic.

This issue affects Junos OS on SRX Series: all versions before 21.2R3-S10, all versions of 21.3, from 21.4 before 21.4R3-S12, all versions of 22.1, from 22.2 before 22.2R3-S8, all versions of 22.4, from 22.4 before 22.4R3-S9, from 23.2 before 23.2R2-S6, from 23.4 before 23.4R2-S7, from 24.2 before 24.2R2-S3, from 24.4 before 24.4R2-S3, from 25.2 before 25.2R1-S2, 25.2R2.

A Missing Authorization vulnerability in the CLI of Juniper Networks Junos OS and Junos OS Evolved allows a local user with low privileges to read sensitive information.

A local user with low privileges can execute the CLI command 'show mgd' with specific arguments which will expose sensitive information.

This issue affects

Junos OS: all versions before 22.4R3-S8, 23.2 versions before 23.2R2-S6, 23.4 versions before 23.4R2-S6, 24.2 versions before 24.2R2-S4, 24.4 versions before 24.4R2-S1, 25.2 version before 25.2R1-S2, 25.2R2;

Junos OS Evolved: all versions before 23.2R2-S6-EVO, 23.4 version before 23.4R2-S6-EVO, 24.2 version before 24.2R2-S4-EVO, 24.4 versions before 24.4R2-S1-EVO, 25.2 versions before 25.2R2-EVO.

An Execution with Unnecessary Privileges vulnerability in the User Interface (UI) of Juniper Networks Junos OS and Junos OS Evolved allows a local, low-privileged attacker to gain root privileges, thus compromising the system.

When a configuration that allows unsigned Python op scripts is present on the device, a non-root user is able to execute malicious op scripts as a root-equivalent user, leading to privilege escalation.

This issue affects Junos OS:

All versions before 22.4R3-S7,  from 23.2 before 23.2R2-S4,  from 23.4 before 23.4R2-S6, from 24.2 before 24.2R1-S2, 24.2R2,  from 24.4 before 24.4R1-S2, 24.4R2;

Junos OS Evolved:

All versions before 22.4R3-S7-EVO,  from 23.2 before 23.2R2-S4-EVO,  from 23.4 before 23.4R2-S6-EVO, from 24.2 before 24.2R2-EVO,  from 24.4 before 24.4R1-S1-EVO, 24.4R2-EVO.

A NULL Pointer Dereference vulnerability in the chassis daemon (chassisd) of Juniper Networks Junos OS on MX, SRX and EX Series allows a local attacker with low privileges to cause a Denial-of-Service (DoS).

When a user executes the 'show chassis' command with specifically crafted options, chassisd will crash and restart. Due to this all components but the Routing Engine (RE) in the chassis are reinitialized, which leads to a complete service outage, which the system automatically recovers from.

This issue affects:

Junos OS on MX, SRX and EX Series, except MX10000 Series and MX304:

all versions before 22.4R3-S8, 23.2 versions before 23.2R2-S5, 23.4 versions before 23.4R2-S6, 24.2 versions before 24.2R2-S2, 24.4 versions before 24.4R2.