In the Linux kernel, the following vulnerability has been resolved:

KVM: nSVM: Always use vmcb01 in VMLOAD/VMSAVE emulation

Commit cc3ed80ae69f ("KVM: nSVM: always use vmcb01 to for vmsave/vmload of guest state") made KVM always use vmcb01 for the fields controlled by VMSAVE/VMLOAD, but it missed updating the VMLOAD/VMSAVE emulation code to always use vmcb01.

As a result, if VMSAVE/VMLOAD is executed by an L2 guest and is not intercepted by L1, KVM will mistakenly use vmcb02. Always use vmcb01 instead of the current VMCB.

In the Linux kernel, the following vulnerability has been resolved:

In the Linux kernel, the following vulnerability has been resolved:

Bluetooth: l2cap: Add missing chan lock in l2capecredreconfrsp

In the Linux kernel, the following vulnerability has been resolved:

vsock/virtio: Initialization of the dangling pointer occurring in vsk->trans

During loopback communication, a dangling pointer can be created in vsk->trans, potentially leading to a Use-After-Free condition. This issue is resolved by initializing vsk->trans to NULL.

In the Linux kernel, the following vulnerability has been resolved:

ALSA: usb-audio: Fix out of bounds reads when finding clock sources

The current USB-audio driver code doesn't check bLength of each descriptor at traversing for clock descriptors. That is, when a device provides a bogus descriptor with a shorter bLength, the driver might hit out-of-bounds reads.

For addressing it, this patch adds sanity checks to the validator functions for the clock descriptor traversal. When the descriptor length is shorter than expected, it's skipped in the loop.

For the clock source and clock multiplier descriptors, we can just check bLength against the sizeof() of each descriptor type. OTOH, the clock selector descriptor of UAC2 and UAC3 has an array of bNrInPins elements and two more fields at its tail, hence those have to be checked in addition to the sizeof() check.

In the Linux kernel, the following vulnerability has been resolved:

ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices

A bogus device can provide a bNumConfigurations value that exceeds the initial value used in usbgetconfiguration for allocating dev->config.

This can lead to out-of-bounds accesses later, e.g. in usbdestroyconfiguration.

In the Linux kernel, the following vulnerability has been resolved:

ipv6: fix possible UAF in ip6finishoutput2()

If skbexpandhead() returns NULL, skb has been freed and associated dst/idev could also have been freed.

We need to hold rcureadlock() to make sure the dst and associated idev are alive.

In the Linux kernel, the following vulnerability has been resolved:

tls: separate no-async decryption request handling from async

If we're not doing async, the handling is much simpler. There's no reference counting, we just need to wait for the completion to wake us up and return its result.

We should preferably also use a separate cryptowait. I'm not seeing a UAF as I did in the past, I think aec7961916f3 ("tls: fix race between async notify and socket close") took care of it.

This will make the next fix easier.

In the Linux kernel, the following vulnerability has been resolved:

RDMA/mana: Validate rxhashkeylen

Sashiko points out that rxhashkeylen comes from a uAPI structure and is blindly passed to memcpy, allowing the userspace to trash kernel memory. Bounds check it so the memcpy cannot overflow.

In the Linux kernel, the following vulnerability has been resolved:

RDMA/vmwpvrdma: Fix double free on pvrdmaallocucontext() error path

Sashiko points out that pvrdmauarfree() is already called within pvrdmadeallocucontext(), so calling it before triggers a double free.

drm/dpmst: Ensure mstprimary pointer is valid in drmdpmsthandleupreq()

In the Linux kernel, the following vulnerability has been resolved:

Bluetooth: l2cap: Check encryption key size on incoming connection

This is required for passing GAP/SEC/SEM/BI-04-C PTS test case: Security Mode 4 Level 4, Responder - Invalid Encryption Key Size - 128 bit

This tests the security key with size from 1 to 15 bytes while the Security Mode 4 Level 4 requests 16 bytes key size.

Currently PTS fails with the following logs: - expected:Connection Response: Code: [3 (0x03)] Code Identifier: (lt)WildCard: Exists(gt) Length: [8 (0x0008)] Destination CID: (lt)WildCard: Exists(gt) Source CID: [64 (0x0040)] Result: [3 (0x0003)] Connection refused - Security block Status: (lt)WildCard: Exists(gt), but received:Connection Response: Code: [3 (0x03)] Code Identifier: [1 (0x01)] Length: [8 (0x0008)] Destination CID: [64 (0x0040)] Source CID: [64 (0x0040)] Result: [0 (0x0000)] Connection Successful Status: [0 (0x0000)] No further information available

And HCI logs: < HCI Command: Read Encrypti.. (0x05|0x0008) plen 2 Handle: 14 Address: 00:1B:DC:F2:24:10 (Vencer Co., Ltd.) HCI Event: Command Complete (0x0e) plen 7 Read Encryption Key Size (0x05|0x0008) ncmd 1 Status: Success (0x00) Handle: 14 Address: 00:1B:DC:F2:24:10 (Vencer Co., Ltd.) Key size: 7 ACL Data RX: Handle 14 flags 0x02 dlen 12 L2CAP: Connection Request (0x02) ident 1 len 4 PSM: 4097 (0x1001) Source CID: 64 < ACL Data TX: Handle 14 flags 0x00 dlen 16 L2CAP: Connection Response (0x03) ident 1 len 8 Destination CID: 64 Source CID: 64 Result: Connection successful (0x0000) Status: No further information available (0x0000)

In the Linux kernel, the following vulnerability has been resolved:

wifi: rt2x00usb: fix devres lifetime

USB drivers bind to USB interfaces and any device managed resources should have their lifetime tied to the interface rather than parent USB device. This avoids issues like memory leaks when drivers are unbound without their devices being physically disconnected (e.g. on probe deferral or configuration changes).

Fix the USB anchor lifetime so that it is released on driver unbind.

In the Linux kernel, the following vulnerability has been resolved:

NFC: nxp-nci: allow GPIOs to sleep

Allow the firmware and enable GPIOs to sleep.

This fixes a WARNON' and allows the driver to operate GPIOs which are connected to I2C GPIO expanders.

-- >8 -- kernel: WARNING: CPU: 3 PID: 2636 at drivers/gpio/gpiolib.c:3880 gpiodsetvalue+0x88/0x98 -- >8 --

drm/i915/gt: Check setdefaultsubmission() before deferencing

HID: asus: avoid memory leak in asusreportfixup()

In the Linux kernel, the following vulnerability has been resolved:

nvme-pci: ensure we're polling a polled queue

A user can change the polled queue count at run time. There's a brief window during a reset where a hipri task may try to poll that queue before the block layer has updated the queue maps, which would race with the now interrupt driven queue and may cause double completions.

HID: magicmouse: avoid memory leak in magicmousereportfixup()

In the Linux kernel, the following vulnerability has been resolved:

module: Fix kernel panic when a symbol stshndx is out of bounds

The module loader doesn't check for bounds of the ELF section index in simplifysymbols():

for (i = 1; i < symsec->shsize / sizeof(ElfSym); i++) { const char name = info->strtab + sym[i].stname;

switch (sym[i].stshndx) { case SHNCOMMON:

[...]

default: / Divert to percpu allocation if a percpu var. / if (sym[i].stshndx == info->index.pcpu) secbase = (unsigned long)modpercpu(mod); else / HERE --> / secbase = info->sechdrs[sym[i].stshndx].shaddr; sym[i].stvalue += secbase; break; } }

A symbol with an out-of-bounds stshndx value, for example 0xffff (known as SHNXINDEX or SHNHIRESERVE), may cause a kernel panic:

BUG: unable to handle page fault for address: ... RIP: 0010:simplifysymbols+0x2b2/0x480 ... Kernel panic - not syncing: Fatal exception

This can happen when module ELF is legitimately using SHNXINDEX or when it is corrupted.

Add a bounds check in simplifysymbols() to validate that stshndx is within the valid range before using it.

This issue was discovered due to a bug in llvm-objcopy, see relevant discussion for details [1].

[1] https://lore.kernel.org/linux-modules/20251224005752.201911-1-ihor.solodrai@linux.dev/

btrfs: set BTRFSROOTORPHANCLEANUP during subvol create

esp: fix skb leak with espintcp and async crypto

afkey: validate families in pfkeysendmigrate()

Bluetooth: L2CAP: Validate PDU length before reading SDU length in l2capecreddatarcv()

Bluetooth: L2CAP: Fix null-ptr-deref on l2capsockreadycb

In the Linux kernel, the following vulnerability has been resolved:

net: lan743x: Modify the EEPROM and OTP size for PCI1xxxx devices

Maximum OTP and EEPROM size for hearthstone PCI1xxxx devices are 8 Kb and 64 Kb respectively. Adjust max size definitions and return correct EEPROM length based on device. Also prevent out-of-bound read/write.

drm/msm: Fix another leak in the submit error path

fbdev: Fix doregisterframebuffer to prevent null-ptr-deref in fbvideomodetovar

In the Linux kernel, the following vulnerability has been resolved:

net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query

Fix a "scheduling while atomic" bug in mlx5eipsecinitmacs() by replacing mlx5querymacaddress() with etheraddrcopy() to get the local MAC address directly from netdev->devaddr.

The issue occurs because mlx5querymacaddress() queries the hardware which involves mlx5cmdexec() that can sleep, but it is called from the mlx5eipsechandleevent workqueue which runs in atomic context.

The MAC address is already available in netdev->devaddr, so no need to query hardware. This avoids the sleeping call and resolves the bug.

Call trace: BUG: scheduling while atomic: kworker/u112:2/69344/0x00000200 schedule+0x7ab/0xa20 schedule+0x1c/0xb0 scheduletimeout+0x6e/0xf0 waitforcommon+0x91/0x1b0 cmdexec+0xa85/0xff0 [mlx5core] mlx5cmdexec+0x1f/0x50 [mlx5core] mlx5querynicvportmacaddress+0x7b/0xd0 [mlx5core] mlx5querymacaddress+0x19/0x30 [mlx5core] mlx5eipsecinitmacs+0xc1/0x720 [mlx5core] mlx5eipsecbuildaccelxfrmattrs+0x422/0x670 [mlx5core] mlx5eipsechandleevent+0x2b9/0x460 [mlx5core] processonework+0x178/0x2e0 workerthread+0x2ea/0x430

In the Linux kernel, the following vulnerability has been resolved:

net: gro: don't merge zcopy skbs

skbgroreceive() can currently copy frags between the source and GRO skb, without checking the zerocopy status, and in particular the SKBFLMANAGEDFRAGREFS flag.

When SKBFLMANAGEDFRAGREFS is set, the skb doesn't hold a reference on the pages in shinfo->frags. Appending those frags to another skb's frags without fixing up the page refcount can lead to UAF.

When either the last skb in the GRO chain (the one we would append frags to) or the source skb is zerocopy, don't merge the skbs.