Last updated 11 February 2025

A flaw was found in grub2 when handling split HTTP headers. While processing a split HTTP header, grub2 wrongly advances its control pointer to the internal buffer by one position, which can lead to an out-of-bounds write. This flaw allows an attacker to leverage this issue by crafting a malicious set of HTTP packages making grub2 corrupt its internal memory metadata structure. This leads to data integrity and confidentiality issues or forces grub to crash, resulting in a denial of service attack.

libexpat could allow a remote attacker to obtain sensitive information, caused by improper handling of XML external entity (XXE) declarations by the XMLExternalEntityParserCreate function. By using a specially crafted XML content, a remote attacker could exploit this vulnerability to obtain sensitive information, and use this information to launch further attacks against the affected system.

An out-of-bounds read vulnerability was discovered in the PCRE2 library in the compilexclassmatchingpath() function of the pcre2jitcompile.c file. This involves a unicode property matching issue in JIT-compiled regular expressions. The issue occurs because the character was not fully read in case-less matching within JIT.

A flaw was found in Undertow. For an AJP 400 response, EAP 7 is improperly sending two response packets, and those packets have the reuse flag set even though JBoss EAP closes the connection. A failure occurs when the connection is reused after a 400 by CPING since it reads in the second SENDHEADERS response packet instead of a CPONG.

A flaw was found in rsyslog's reception TCP modules. This flaw allows an attacker to craft a malicious message leading to a heap-based buffer overflow. This issue allows the attacker to corrupt or access data stored in memory, leading to a denial of service in the rsyslog or possible remote code execution.

A race problem was seen in the vtkioctl in drivers/tty/vt/vtioctl.c in the Linux kernel, which may cause an out of bounds read in vt as the write access to vcmode is not protected by lock-in vtioctl (KDSETMDE). The highest threat from this vulnerability is to data confidentiality.

A null pointer dereference flaw was found in openssl. A remote attacker, able to control the arguments of the GENERALNAMEcmp function, could cause the application, compiled with openssl to crash resulting in a denial of service. The highest threat from this vulnerability is to system availability.

Issue summary: Calling the OpenSSL API function SSLselectnextproto with an empty supported client protocols buffer may cause a crash or memory contents to be sent to the peer.

A use after free can have a range of potential consequences such as the corruption of valid data, crashes or execution of arbitrary code. However, only applications that directly call the SSLfreebuffers function are affected by this issue. Applications that do not call this function are not vulnerable. Our investigations indicate that this function is rarely used by applications.

The SSLfreebuffers function is used to free the internal OpenSSL buffer used when processing an incoming record from the network. The call is only expected to succeed if the buffer is not currently in use. However, two scenarios have been identified where the buffer is freed even when still in use.

The first scenario occurs where a record header has been received from the network and processed by OpenSSL, but the full record body has not yet arrived. In this case calling SSLfreebuffers will succeed even though a record has only been partially processed and the buffer is still in use.

The second scenario occurs where a full record containing application data has been received and processed by OpenSSL but the application has only read part of this data. Again a call to SSLfreebuffers will succeed even though the buffer is still in use.

While these scenarios could occur accidentally during normal operation a malicious attacker could attempt to engineer a stituation where this occurs. We are not aware of this issue being actively exploited.

The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.

OpenSSL 1.0.2 is also not affected by this issue.

OpenSSL 3.3, 3.2, 3.1, 3.0 and 1.1.1 are vulnerable to this issue.

OpenSSL 3.3 users should upgrade to OpenSSL 3.3.1 once it is released.

OpenSSL 3.2 users should upgrade to OpenSSL 3.2.2 once it is released.

OpenSSL 3.1 users should upgrade to OpenSSL 3.1.6 once it is released.

OpenSSL 3.0 users should upgrade to OpenSSL 3.0.14 once it is released.

OpenSSL 1.1.1 users should upgrade to OpenSSL 1.1.1y once it is released (premium support customers only).

Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available. The fix is also available in commit e5093133c3 (for 3.3), commit c88c3de510 (for 3.2), commit 704f725b96 (for 3.1) and commit b3f0eb0a29 (for 3.0) in the OpenSSL git repository. It is available to premium support customers in commit f7a045f314 (for 1.1.1).

This issue was reported on 10th April 2024 by William Ahern (Akamai). The fix was developed by Matt Caswell and Watson Ladd (Akamai).

AMD. A buffer overflow issue was addressed with improved memory handling.

A vulnerability was discovered in Python. A quadratic algorithm exists when processing inputs to the IDNA (RFC 3490) decoder, such that a crafted unreasonably long name being presented to the decoder could lead to a CPU denial of service. Hostnames are often supplied by remote servers that could be controlled by a malicious actor, which could trigger excessive CPU consumption on the client attempting to make use of an attacker-supplied hostname.

Last updated 24 July 2024

An issue was discovered in comparedigest in Lib/hmac.py in Python through 3.9.1. Constant-time-defeating optimisations were possible in the accumulator variable in hmac.comparedigest.

An issue in the urllib.parse component of Python before 3.11.4 allows attackers to bypass blocklisting methods by supplying a URL that starts with blank characters.

Last updated 18 August 2025

Accessibility. A logging issue was addressed with improved data redaction.

Issue summary: Use of the low-level GF(2^m) elliptic curve APIs with untrusted explicit values for the field polynomial can lead to out-of-bounds memory reads or writes.

Impact summary: Out of bound memory writes can lead to an application crash or even a possibility of a remote code execution, however, in all the protocols involving Elliptic Curve Cryptography that we're aware of, either only "named curves" are supported, or, if explicit curve parameters are supported, they specify an X9.62 encoding of binary (GF(2^m)) curves that can't represent problematic input values. Thus the likelihood of existence of a vulnerable application is low.

In particular, the X9.62 encoding is used for ECC keys in X.509 certificates, so problematic inputs cannot occur in the context of processing X.509 certificates. Any problematic use-cases would have to be using an "exotic" curve encoding.

The affected APIs include: ECGROUPnewcurveGF2m(), ECGROUPnewfromparams(), and various supporting BNGF2m() functions.

Applications working with "exotic" explicit binary (GF(2^m)) curve parameters, that make it possible to represent invalid field polynomials with a zero constant term, via the above or similar APIs, may terminate abruptly as a result of reading or writing outside of array bounds. Remote code execution cannot easily be ruled out.

The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.

Issue summary: A timing side-channel which could potentially allow recovering the private key exists in the ECDSA signature computation.

Impact summary: A timing side-channel in ECDSA signature computations could allow recovering the private key by an attacker. However, measuring the timing would require either local access to the signing application or a very fast network connection with low latency.

There is a timing signal of around 300 nanoseconds when the top word of the inverted ECDSA nonce value is zero. This can happen with significant probability only for some of the supported elliptic curves. In particular the NIST P-521 curve is affected. To be able to measure this leak, the attacker process must either be located in the same physical computer or must have a very fast network connection with low latency. For that reason the severity of this vulnerability is Low.

The FIPS modules in 3.4, 3.3, 3.2, 3.1 and 3.0 are affected by this issue.

An issue was discovered in the Linux kernel before 5.2.3. There is a use-after-free caused by a malicious USB device in the drivers/media/usb/dvb-usb/dvb-usb-init.c driver.

A flaw null pointer dereference in the Linux kernel cgroupv2 subsystem in versions before 5.7.10 was found in the way when reboot the system. A local user could use this flaw to crash the system or escalate their privileges on the system.

An issue was discovered in drivers/usb/gadget/composite.c in the Linux kernel before 5.16.10. The USB Gadget subsystem lacks certain validation of interface OS descriptor requests (ones with a large array index and ones associated with NULL function pointer retrieval). Memory corruption might occur.

A use-after-free flaw was found in the Expat package, caused by destruction of a shared DTD in XMLExternalEntityParserCreate in out-of-memory situations. This may lead to availability disruptions.

A use-after-free flaw was found in usbsgcancel in drivers/usb/core/message.c in USB core subsystem. This flaw could allow a local attacker with special user privilege (or root) to crash the system due to a race problem in scatter-gather cancellation and transfer completion in usbsgwait. This vulnerability can even lead to a kernel information leak problem .

Here usbsgcancel() does not take any reference to the transfer and there is nothing to prevent the URBs from being deallocated while the routine is trying to use them.

Taking a reference by incrementing the transfer's io->count field while the cancellation is in progress and decrementing it afterwards can be way to address this. The transfer's URBs are not deallocated until io->complete is triggered, which happens when io->count reaches zero. ~~~ BUG: KASAN: use-after-free in atomicread include/asm-generic/atomic-instrumented.h:26 [inline] BUG: KASAN: use-after-free in usbhcdunlinkurb+0x5f/0x170 drivers/usb/core/hcd.c:1607 Read of size 4 at addr ffff888065379610 by task kworker/u4:1/27 ~~~

References: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.6.8 https://lkml.org/lkml/2020/3/23/52

Upstream commit: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=056ad39ee9253873522f6469c3364964a322912b

A locking inconsistency issue was discovered in the tty subsystem of the Linux kernel through 5.9.13. drivers/tty/ttyio.c and drivers/tty/ttyjobctrl.c may allow a read-after-free attack against TIOCGSID, aka CID-c8bcd9c5be24.

Chromium: CVE-2023-4863 Heap buffer overflow in WebP

A flaw was found in the Linux kernel implementation of userspace core dumps. This flaw allows anyone with access to core dumps to see a small amount of private kernel data about the current running kernels internal state which could be used to further allow an attack to more reliably execute. This information could be user processes or kernel state from previous executions.

References: https://github.com/google/kmsan/issues/76 https://twitter.com/grsecurity/status/1252558055629299712 https://github.com/ruscur/linux/commit/a95cdec9fa0c08e6eeb410d461c03af8fd1fef0a

A locking issue was discovered in the tty subsystem of the Linux kernel in drivers/tty/ttyjobctrl.c which could allow an attacker with a local account to possibly corrupt memory or escalate privileges.

Reference and upstream patch: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=54ffccbf053b5b6ca4f6e45094b942fab92a25fc

A device tracking vulnerability was found in the flowdissector feature in the Linux kernel. This flaw occurs because the auto flowlabel of the UDP IPv6 packet relies on a 32-bit hashmd value as a secret, and jhash (instead of siphash) is used. The hashmd value remains the same starting from boot time and can be inferred by an attacker.

A security vulnerability was found in zlib. The flaw triggered a heap-based buffer in inflate in the inflate.c function via a large gzip header extra field. This flaw is only applicable in the call inflateGetHeader.