The specific flaw exists within the DPT I2O Controller driver. The issue results from the lack of proper locking when performing operations on an object. An attacker can leverage this in conjunction with other vulnerabilities to escalate privileges and execute arbitrary code in the context of the kernel.

An issue was discovered in the Linux kernel through 6.0.9. drivers/char/xillybus/xillyusb.c has a race condition and use-after-free during physical removal of a USB device.

An issue was discovered in the Linux kernel before 6.0.11. Missing offset validation in drivers/net/wireless/microchip/wilc1000/hif.c in the WILC1000 wireless driver can trigger an out-of-bounds read when parsing a Robust Security Network (RSN) information element from a Netlink packet.

Issue summary: A timing side-channel which could potentially allow recovering the private key exists in the ECDSA signature computation.

Impact summary: A timing side-channel in ECDSA signature computations could allow recovering the private key by an attacker. However, measuring the timing would require either local access to the signing application or a very fast network connection with low latency.

There is a timing signal of around 300 nanoseconds when the top word of the inverted ECDSA nonce value is zero. This can happen with significant probability only for some of the supported elliptic curves. In particular the NIST P-521 curve is affected. To be able to measure this leak, the attacker process must either be located in the same physical computer or must have a very fast network connection with low latency. For that reason the severity of this vulnerability is Low.

The FIPS modules in 3.4, 3.3, 3.2, 3.1 and 3.0 are affected by this issue.

A use after free can have a range of potential consequences such as the corruption of valid data, crashes or execution of arbitrary code. However, only applications that directly call the SSLfreebuffers function are affected by this issue. Applications that do not call this function are not vulnerable. Our investigations indicate that this function is rarely used by applications.

The SSLfreebuffers function is used to free the internal OpenSSL buffer used when processing an incoming record from the network. The call is only expected to succeed if the buffer is not currently in use. However, two scenarios have been identified where the buffer is freed even when still in use.

The first scenario occurs where a record header has been received from the network and processed by OpenSSL, but the full record body has not yet arrived. In this case calling SSLfreebuffers will succeed even though a record has only been partially processed and the buffer is still in use.

The second scenario occurs where a full record containing application data has been received and processed by OpenSSL but the application has only read part of this data. Again a call to SSLfreebuffers will succeed even though the buffer is still in use.

While these scenarios could occur accidentally during normal operation a malicious attacker could attempt to engineer a stituation where this occurs. We are not aware of this issue being actively exploited.

The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.

OpenSSL 1.0.2 is also not affected by this issue.

OpenSSL 3.3, 3.2, 3.1, 3.0 and 1.1.1 are vulnerable to this issue.

OpenSSL 3.3 users should upgrade to OpenSSL 3.3.1 once it is released.

OpenSSL 3.2 users should upgrade to OpenSSL 3.2.2 once it is released.

OpenSSL 3.1 users should upgrade to OpenSSL 3.1.6 once it is released.

OpenSSL 3.0 users should upgrade to OpenSSL 3.0.14 once it is released.

OpenSSL 1.1.1 users should upgrade to OpenSSL 1.1.1y once it is released (premium support customers only).

Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available. The fix is also available in commit e5093133c3 (for 3.3), commit c88c3de510 (for 3.2), commit 704f725b96 (for 3.1) and commit b3f0eb0a29 (for 3.0) in the OpenSSL git repository. It is available to premium support customers in commit f7a045f314 (for 1.1.1).

This issue was reported on 10th April 2024 by William Ahern (Akamai). The fix was developed by Matt Caswell and Watson Ladd (Akamai).

A use-after-free exists in drivers/tee/teeshm.c in the TEE subsystem in the Linux kernel through 5.15.11. This occurs because of a race condition in teeshmgetfromid during an attempt to free a shared memory object.

A remote stack overflow in the TIPC networking module. With FORTIFYSOURCE's stricter memcpy() bounds checking, this can be exploited to cause remote DOS via kernel panic on systems using TIPC. Prior to these bounds checks, and with a canary leak (or no CONFIGSTACKPROTECTOR), this can be exploited for RCE.

Reference: https://www.openwall.com/lists/oss-security/2022/02/10/1

A vulnerability was found in cgroupreleaseagentwrite in kernel/cgroup/cgroup-v1.c in the Linux kernel. In this flaw, under certain circumstances, the cgroups v1 releaseagent feature can be used to escalate privilege and bypass namespace isolation unexpectedly.

Upstream Commit:

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=24f6008564183aa120d07c03d9289519c2fe02af

A flaw was found in unrestricted eBPF usage by the BPFBTFLOAD, leading to a possible out-of-bounds memory write in the Linux kernel’s BPF subsystem due to the way a user loads BTF. This flaw allows a local user to crash or escalate their privileges on the system.

Last updated 25 April 2025

A flaw in the Linux Kernel found. If unprivileged users can mount FUSE filesystems, then can trigger use after free (UAF) that reads of write() buffers, allowing theft of (partial) /etc/shadow hashes or any other data from filesystem.

FUSE allows the userspace filesystem to specify on FUSEOPEN whether the file should use the normal kernel pagecache for handling read()/write() or just send FUSEREAD/FUSEWRITE requests directly to the userspace filesystem (using the flag FOPENDIRECTIO in fuseopenout::openflags).

In FOPENDIRECTIO mode, fusefilewriteiter() calls fusedirectwriteiter(), which normally calls fusedirectio(), which then imports the write buffer with fusegetuserpages(), which uses iovitergetpages() to grab references to userspace pages instead of actually copying memory.

On the filesystem device side, these pages can then either be read to userspace (via fusedevread()), or splice()d over into a pipe using fusedevspliceread() as pipe buffers with &nostealpipebufops.

This is wrong because after fusedevdoread() unlocks the FUSE request, the userspace filesystem can mark the request as completed, causing write() to return. At that point, the write buffer may be reused for other purposes, and the userspace filesystem should no longer have access to it.

In kernel/bpf/verifier.c , there is a possible way to manipulate pointer arithmetic due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

An issue was discovered in the Linux kernel before 5.16.12. drivers/net/usb/sr9700.c allows attackers to obtain sensitive information from heap memory via crafted frame lengths from a device.

An out-of-bounds (OOB) memory read flaw was found in the Qualcomm IPC router protocol in the Linux kernel. A missing sanity check allows a local attacker to gain access to out-of-bounds memory, leading to a system crash or a leak of internal kernel information. The highest threat from this vulnerability is to system availability.

A race problem was seen in the vtkioctl in drivers/tty/vt/vtioctl.c in the Linux kernel, which may cause an out of bounds read in vt as the write access to vcmode is not protected by lock-in vtioctl (KDSETMDE). The highest threat from this vulnerability is to data confidentiality.

A read-after-free memory flaw was found in the Linux kernel's garbage collection for Unix domain socket file handlers in the way users call close() and fget() simultaneously and can potentially trigger a race condition. This flaw allows a local user to crash the system or escalate their privileges on the system.

An out-of-bounds (OOB) memory write flaw was found in preallocelemsandfreelist in kernel/bpf/stackmap.c in the bpf iin the Linux kernel. In this flaw, the multiplication to calculate the size could lead to an integer overflow, and this could allow a local attacker, with a special user privilege to gain access to out-of-bounds memory leading to a system crash or a leak of internal kernel information.

Reference and upstream patch: https://github.com/torvalds/linux/commit/30e29a9a2bc6a4888335a6ede968b75cd329657a

A heap buffer overflow flaw was found in IPsec ESP transformation code in net/ipv4/esp4.c and net/ipv6/esp6.c. This flaw allows a local attacker with a normal user privilege to overwrite kernel heap objects and may cause a local privilege escalation threat.

A use-after-free flaw was found in u32change in net/sched/clsu32.c in the network subcomponent of the Linux kernel. This flaw could allow a local attacker to crash the system and cause a privilege escalation, and a kernel information leak problem.

References and upstream patch: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=3db09e762dc79584a69c10d74a6b98f89a9979f8 https://kernel.dance/#3db09e762dc79584a69c10d74a6b98f89a9979f8

A flaw was found in the Linux kernel. The PTRACESEIZE code path allows attackers to bypass intended restrictions on setting the PTSUSPENDSECCOMP flag, possibly disabling seccomp.

A flaw was found in the Linux kernels eBPF implementation. By default, accessing the eBPF verifier is only accessible to privileged users with CAPSYSADMIN. A local user with the ability to insert eBPF instructions can abuse a flaw in eBPF to corrupt memory. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability.

A flaw was found in kernel/bpf/verifier.c in BPF in the Linux kernel. An incorrect limit is enforced for pointer arithmetic operations which can be abused to perform out-of-bounds reads and writes in kernel memory, leading to local privilege escalation. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.

An out-of-bounds access flaw was found in the Linux kernel’s implementation of the eBPF code verifier, where an incorrect register bounds calculation while checking unsigned 32-bit instructions in an eBPF program occurs.. By default accessing the eBPF verifier is only accessible to privileged users with CAPSYSADMIN. The issue results from the lack of proper validation of user-supplied eBPF programs prior to executing them. A local user could use this flaw to crash the system or possibly escalate their privileges on the system.

A double free bug in packetsetring() in net/packet/afpacket.c can be exploited by a local user through crafted syscalls to escalate privileges or deny service. We recommend upgrading kernel past the effected versions or rebuilding past ec6af094ea28f0f2dda1a6a33b14cd57e36a9755

A use-after-free exists in the Linux Kernel in tcnewtfilter that could allow a local attacker to gain privilege escalation. The exploit requires unprivileged user namespaces. We recommend upgrading past commit 04c2a47ffb13c29778e2a14e414ad4cb5a5db4b5

A flaw was discovered in the cryptographic receive code in the Linux kernel's implementation of transparent interprocess communication. An attacker, with the ability to send TIPC messages to the target, can corrupt memory and escalate privileges on the target system.

A flaw was discovered in processing setsockopt IPTSOSETREPLACE (or IP6TSOSETREPLACE) for 32 bit processes on 64 bit systems. This flaw will allow local user to gain privileges or cause a DoS through user name space. This action is usually restricted to root-privileged users but can also be leveraged if the kernel is compiled with CONFIGUSERNS and CONFIGNETNS and the user is granted elevated privileges.

A heap-based buffer overflow flaw was found in the way the legacyparseparam function in the Filesystem Context functionality of the Linux kernel verified the supplied parameters length. An unprivileged (in case of unprivileged user namespaces enabled, otherwise needs namespaced CAPSYSADMIN privilege) local user able to open a filesystem that does not support the Filesystem Context API (and thus fallbacks to legacy handling) could use this flaw to escalate their privileges on the system.

.A flaw was found in the CAN BCM networking protocol in the Linux kernel, where a local attacker can abuse a flaw in the CAN subsystem to corrupt memory, crash the system or escalate privileges. This race condition in net/can/bcm.c in the Linux kernel allows for local privilege escalation to root.

The BPF subsystem in the Linux kernel before 4.17 mishandles situations with a long jump over an instruction sequence where inner instructions require substantial expansions into multiple BPF instructions, leading to an overflow. This affects kernel/bpf/core.c and net/core/filter.c.