Where
-Infinity
0
Severity
7.8
AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

A vulnerability was found in subscription-manager that allows local privilege escalation due to inadequate authorization. The D-Bus interface com.redhat.RHSM1 exposes a significant number of methods to all users that could change the state of the registration. By using the com.redhat.RHSM1.Config.SetAll() method, a low-privileged local user could tamper with the state of the registration, by unregistering the system or by changing the current entitlements. This flaw allows an attacker to set arbitrary configuration directives for /etc/rhsm/rhsm.conf, which can be abused to cause a local privilege escalation to an unconfined root.

1 / 3
Source: NVD
First published (updated )
Severity
7.5
Double Free
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

A double-free was found in the way 389-ds-base handles virtual attributes context in persistent searches. An attacker could send a series of search requests, forcing the server to behave unexpectedly, and crash.

1 / 2
Source: MITRE
First published (updated )
Severity
7.8
Use After Free
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

CVE-2023-0494/ZDI-CAN-19596: X.Org Server DeepCopyPointerClasses use-after-free

A dangling pointer in DeepCopyPointerClasses can be exploited by ProcXkbSetDeviceInfo() and ProcXkbGetDeviceInfo() to read/write into freed memory.

1 / 2
Source: Red Hat
First published (updated )
Severity
4.3
Infoleak
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N

A flaw was found in systemd-journald. An out-of-bounds read when parsing a crafted syslog message that could lead to information disclosure.

1 / 3
Source: Red Hat
First published (updated )
Severity
9
CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

The Samba vfsfruit module uses extended file attributes (EA, xattr) to provide "...enhanced compatibility with Apple SMB clients and interoperability with a Netatalk 3 AFP fileserver." Samba versions prior to 4.13.17, 4.14.12 and 4.15.5 with vfsfruit configured allow out-of-bounds heap read and write via specially crafted extended file attributes. A remote attacker with write access to extended file attributes can execute arbitrary code with the privileges of smbd, typically root.

First published (updated )
Severity
8.8
CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

FreeIPA supports the Kerberos PKINIT protocol extension (RFC 4556). PKINIT enables a client to authenticate to the KDC using an X.509 certificate and the corresonding private key, rather than a passphrase or keytab. FreeIPA uses mapping rules to map a certificate presented during a PKINIT authentication request to the corresponding principal. The mapping filter is vulnerable to LDAP filter injection. The search result can be influenced by values in the certificate, which may be attacker controlled. In the most extreme case, an attacker could gain control of the admin account, leading to full domain takeover.

FreeIPA is not vulnerable in its default configuration.

The problem is in libssscertmap, which is part of SSSD. FreeIPA servers use this library in ipakdb Kerberos plugin implementation.

The issue was introduced in SSSD 1.15.3 (when libssscertmap was introduced) and resolved in SSSD 2.3.1.

1 / 2
Source: Red Hat
First published (updated )
Severity
8.8
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H

A flaw was found in the KVM's AMD code for supporting SVM nested virtualization. The flaw occurs when processing the VMCB (virtual machine control block) provided by the L1 guest to spawn/handle a nested guest (L2). Due to improper validation of the "virtext" field, this issue could allow a malicious L1 to disable both VMLOAD/VMSAVE intercepts and VLS (Virtual VMLOAD/VMSAVE) for the L2 guest. As a result, the L2 guest would be allowed to read/write physical pages of the host, resulting in a crash of the entire system, leak of sensitive data or potential guest-to-host escape.

1 / 3

Remedy

This vulnerability can be mitigated by disabling the nested virtualization feature: ``` # modprobe -r kvm_amd # modprobe kvm_amd nested=0 ``` Disabling VLS (Virtual VMLOAD/VMSAVE) is an alternative mitigation: ``` # modprobe kvm_amd vls=0 ```

Remedy

Disable nested virtualisation when loading the KVM AMD module: modprobe kvm_amd nested=0
First published (updated )
Severity
5.5
Race Condition, Use After Free, Double Free
CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

A use-after-free vulnerability was found in a network namespaces code affecting the Linux kernel since v4.0-rc1 through v4.15-rc5. The function getnetnsbyid() does not check for the net::count value after it has found a peer network in netnsids idr which could lead to double free and memory corruption. This vulnerability could allow an unprivileged local user to induce kernel memory corruption on the system, leading to a crash. Due to the nature of the flaw, privilege escalation cannot be fully ruled out, although we believe it is unlikely.

References:

https://marc.info/?l=linux-netdev&m=151370451121029&w=2

https://marc.info/?t=151370468900001&r=1&w=2 (a whole thread)

http://seclists.org/oss-sec/2018/q1/7

An upstream patch:

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=21b5944350052d2583e82dd59b19a9ba94a007f0

1 / 3
Source: Red Hat
First published (updated )
Severity
8.8
Buffer Overflow
CVSS:3.0/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H

Multiple unspecified vulnerabilities in the browser engine in Mozilla Firefox before 47.0 and Firefox ESR 45.x before 45.2 allow remote attackers to cause a denial of service (memory corruption and application crash) or possibly execute arbitrary code via unknown vectors.

First published (updated )
Severity
7.5
Integer Overflow
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

A denial of service vulnerability was found in rsyslog in the imptcp module. An attacker could send a specially crafted message to the imptcp socket, which would cause rsyslog to crash.

1 / 3

Remedy

This vulnerability requires the "imptcp" module to be enabled, and listening on a port that can potentially be reached by attackers. This module is not enabled by default in Red Hat Enterprise Linux 7. To check if imptcp is enabled, look for the string `$InputPTCPServerRun`in your rsyslog configuration.
First published (updated )
Severity
9.3
AV:N/AC:M/Au:N/C:C/I:C/A:C

The C+ mode offload emulation in the RTL8139 network card device model in QEMU, as used in Xen 4.5.x and earlier, allows remote attackers to read process heap memory via unspecified vectors.

First published (updated )
Severity
7.5
CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N

A flaw was found in the way the ntp-keygen utility generated MD5 symmetric keys on big-endian systems. This could possibly allow an attacker to guess generated MD5 keys that could then be used to spoof an NTP client or server.

If the lowest byte of the temp variable is outside of the printable characters range (between 0x20 and 0x7f), the ntp-keygen utility enters an infinite loop. However, if the temp variable is within the aforementioned range, the generated MD5 key will consist of 20 identical characters, meaning only 93 possible keys can be generated.

Upstream bug:

https://bugs.ntp.org/showbug.cgi?id=2797

Upstream patch:

http://bk1.ntp.org/ntp-stable/?PAGE=patch&REV=55199296N2gFqH1Hm5GOnhrk9Ypygg

CVE request:

http://seclists.org/oss-sec/2015/q2/85

1 / 2
Source: Red Hat
First published (updated )
Severity
6.9
Buffer Overflow
AV:L/AC:M/Au:N/C:C/I:C/A:C

Due converting PIO to the new memory read/write api we no longer provide separate I/O region lenghts for read and write operations. As a result, reading from PIT Mode/Command register will end with accessing pit->channels with invalid index and potentially cause memory corruption and/or minor information leak.

A privileged guest user in a guest with QEMU PIT emulation enabled could potentially (tough unlikely) use this flaw to execute arbitrary code on the host with the privileges of the hosting QEMU process. (QEMU part of the vulnerability)

A privileged guest user in a guest could potentially (tough unlikely) use this flaw to execute arbitrary code on the host. (KVM part of the vulnerability)

Acknowledgements:

Red Hat would like to thank Matt Tait of Google's Project Zero security team for reporting this issue.

1 / 2
Source: Red Hat
First published (updated )
Severity
7.8
Buffer Overflow
CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H

openjpeg: A heap-based buffer overflow flaw was found in the patch for CVE-2013-6045. A crafted j2k image could cause the application to crash, or potentially execute arbitrary code.

First published (updated )
Severity
6.8
CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N

A flaw was found in the way samba implemented SMB1 authentication. An attacker could use this flaw to retrieve the plaintext password sent over the wire even if Kerberos authentication was required.

1 / 3

Remedy

Ensure the following [global] smb.conf parameters are set to their default values as shown below: ~~~ client lanman auth = no client NTLMv2 auth = yes client plaintext auth = no client min protocol = SMB2_02 ~~~ Or use the '-k' command line option only without the -U option, which will make use of an existing krb5 ccache.
First published (updated )
Severity
9
Race Condition
CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H

A flaw was found in the way Samba, as an Active Directory Domain Controller, implemented Kerberos name-based authentication. The Samba AD DC, could become confused about the user a ticket represents if it did not strictly require a Kerberos PAC and always use the SIDs found within. The result could include total domain compromise.

1 / 3
Source: Launchpad
First published (updated )
Severity
8.5
Input Validation
CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N

A flaw was found in the way Samba maps domain users to local users. An authenticated attacker could use this flaw to cause possible privilege escalation.

1 / 3

Remedy

Setting "gensec:require_pac=true" in the smb.conf makes, due to a cache prime in winbind, the DOMAIN\user lookup succeed, provided nss_winbind is in use, 'winbind use default domain = no' (the default) and no error paths are hit. It would be prudent to pre-create disabled users in Active Directory matching on all privileged names not held in Active Directory, eg ~~~ samba-tool user add root -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password samba-tool user add ubuntu -H ldap://$SERVER -U$USERNAME%$PASSWORD --random-password ~~~ (repeat for eg all system users under 1000 in /etc/passwd or special to any other AD-connected services, eg perhaps "admin" for a web-app)
First published (updated )
Severity
7

Important: pki-core security update

Remedy

For details on how to apply this update, which includes the changes described in this advisory, refer to:<br><a href="https://access.redhat.com/articles/11258" target="_blank">https://access.redhat.com/articles/11258</a>
First published (updated )
Severity
4

IBM Java SE version 8 includes the IBM Java Runtime Environment and the IBM Java Software Development Kit.<br>Security Fix(es):<br><li> IBM JDK: Object Request Broker (ORB) denial of service (CVE-2023-38264)</li> For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.

1 / 2
Source: Red Hat

Remedy

For details on how to apply this update, refer to:<br><a href="https://access.redhat.com/articles/11258" target="_blank">https://access.redhat.com/articles/11258</a>
First published (updated )
Severity
7

Flatpak is a system for building, distributing, and running sandboxed desktopapplications on Linux.Security Fix(es): flatpak: sandbox escape via RequestBackground portal (CVE-2024-32462) For more details about the security issue(s), including the impact, a CVSSscore, acknowledgments, and other related information, refer the CVE page(s)listed in the References section.

1 / 2
Source: Red Hat

Remedy

Before applying this update, make sure all previously released errata<br>relevant to your system have been applied.<br>For details on how to apply this update, refer to:<br><a href="https://access.redhat.com/articles/11258" target="_blank">https://access.redhat.com/articles/11258</a>
First published (updated )
Severity
7
Input Validation

Important: linux-firmware security update

1 / 2
Source: Red Hat

Remedy

For details on how to apply this update, which includes the changes described in this advisory, refer to:<br><a href="https://access.redhat.com/articles/11258" target="_blank">https://access.redhat.com/articles/11258</a>
First published (updated )
Severity
7
Use After Free

Important: firefox security update

1 / 2
Source: Red Hat

Remedy

For details on how to apply this update, refer to:<br><a href="https://access.redhat.com/articles/11258" target="_blank">https://access.redhat.com/articles/11258</a> After installing the update, Firefox must be restarted for the changes to take<br>effect.
First published (updated )
Severity
7

Important: bind, bind-dyndb-ldap, and dhcp security update

1 / 2
Source: Red Hat

Remedy

For details on how to apply this update, which includes the changes described in this advisory, refer to:<br><a href="https://access.redhat.com/articles/11258" target="_blank">https://access.redhat.com/articles/11258</a> After installing the update, the BIND daemon (named) will be restarted automatically.
First published (updated )
Severity
7

Important: ipa security update

1 / 2
Source: Red Hat

Remedy

Before applying this update, make sure all previously released errata<br>relevant to your system have been applied.<br>For details on how to apply this update, refer to:<br><a href="https://access.redhat.com/articles/11258" target="_blank">https://access.redhat.com/articles/11258</a>
First published (updated )
Severity
7
Command Injection, OS Command Injection

Important: less security update

1 / 2
Source: Red Hat

Remedy

For details on how to apply this update, refer to:<br><a href="https://access.redhat.com/articles/11258" target="_blank">https://access.redhat.com/articles/11258</a>
First published (updated )
Severity
7

389 Directory Server is an LDAP version 3 (LDAPv3) compliant server. The base packages include the Lightweight Directory Access Protocol (LDAP) server and command-line utilities for server administration.<br>Security Fix(es):<br><li> 389-ds-base: potential denial of service via specially crafted kerberos AS-REQ request (CVE-2024-3657)</li> <li> 389-ds-base: Malformed userPassword may cause crash at domodify in slapd/modify.c (CVE-2024-2199)</li> For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.

1 / 2
Source: Red Hat

Remedy

For details on how to apply this update, which includes the changes described in this advisory, refer to:<br><a href="https://access.redhat.com/articles/11258" target="_blank">https://access.redhat.com/articles/11258</a> After installing this update, the 389 server service will be restarted automatically.
First published (updated )
Severity
7
Buffer Overflow, Null Pointer Dereference

Important: glibc security update

1 / 2
Source: Red Hat

Remedy

For details on how to apply this update, refer to:<br><a href="https://access.redhat.com/articles/11258" target="_blank">https://access.redhat.com/articles/11258</a>
First published (updated )
Severity
7
Use After Free

Important: firefox security update

1 / 2
Source: Red Hat

Remedy

Before applying this update, make sure all previously released errata<br>relevant to your system have been applied.<br>For details on how to apply this update, refer to:<br><a href="https://access.redhat.com/articles/11258" target="_blank">https://access.redhat.com/articles/11258</a>
First published (updated )
Severity
7

Important: tigervnc security update

1 / 2
Source: Red Hat

Remedy

For details on how to apply this update, which includes the changes described in this advisory, refer to:<br><a href="https://access.redhat.com/articles/11258" target="_blank">https://access.redhat.com/articles/11258</a>
First published (updated )
Severity
4
Buffer Overflow

Moderate: grub2 security update

1 / 2
Source: Red Hat

Remedy

For details on how to apply this update, refer to:<br><a href="https://access.redhat.com/articles/11258" target="_blank">https://access.redhat.com/articles/11258</a>
First published (updated )

Contact

SecAlerts Pty Ltd.
132 Wickham Terrace
Fortitude Valley,
QLD 4006, Australia
info@secalerts.co
By using SecAlerts services, you agree to our services end-user license agreement. This website is safeguarded by reCAPTCHA and governed by the Google Privacy Policy and Terms of Service. All names, logos, and brands of products are owned by their respective owners, and any usage of these names, logos, and brands for identification purposes only does not imply endorsement. If you possess any content that requires removal, please get in touch with us.
Ā© 2026 SecAlerts Pty Ltd.
ABN: 70 645 966 203, ACN: 645 966 203