Where
AND
-Infinity
0
Severity
9
CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

A remote stack overflow in the TIPC networking module. With FORTIFYSOURCE's stricter memcpy() bounds checking, this can be exploited to cause remote DOS via kernel panic on systems using TIPC. Prior to these bounds checks, and with a canary leak (or no CONFIGSTACKPROTECTOR), this can be exploited for RCE.

Reference: https://www.openwall.com/lists/oss-security/2022/02/10/1

1 / 4
Source: Red Hat

Remedy

The TIPC module will NOT be automatically loaded. When required, administrative action is needed to explicitly load this module. Loading the module can be prevented with the following instructions: # echo "install tipc /bin/true" >> /etc/modprobe.d/disable-tipc.conf The system will need to be restarted if the tipc module is loaded. In most circumstances, the TIPC kernel module will be unable to be unloaded while any network interfaces are active and the protocol is in use. If the system requires this module to work correctly, this mitigation may not be suitable.

Remedy

Ensure the tipc module is not loaded; unlike many other network protocols in the Linux kernel, the tipc module cannot be auto-loaded by an unprivileged user.
First published (updated )
Severity
9
SSRF
CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:H

A crafted request uri-path can cause modproxy to forward the request to an origin server choosen by the remote user. This issue affects Apache HTTP Server 2.4.48 and earlier.

1 / 3
First published (updated )
Severity
8.8
Buffer Overflow
CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H

A vulnerability was found in WebKit. The flaw is triggered when processing maliciously crafted web content that may lead to arbitrary code execution. Improved memory handling addresses the multiple memory corruption issues.

1 / 3
First published (updated )
Severity
8.1
EPSS
0.30%
CSRF
AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N

A Cross-site request forgery vulnerability exists in ipa/session/loginpassword in all supported versions of IPA. This flaw allows an attacker to trick the user into submitting a request that could perform actions as the user, resulting in a loss of confidentiality and system integrity. During community penetration testing it was found that for certain HTTP end-points FreeIPA does not ensure CSRF protection. Due to implementation details one cannot use this flaw for reflection of a cookie representing already logged-in user. An attacker would always have to go through a new authentication attempt.

1 / 3
Source: NVD
First published (updated )
Severity
7.8
Infoleak
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

A vulnerability was found in kvms390guestsidaop in arch/s390/kvm/kvm-s390.c in KVM for s390 in the Linux kernel. In this flaw, a local attacker with a normal user privilege may impact in unauthorized memory write access.

1 / 4
Source: Red Hat

Remedy

As the kvm.ko kernel module will be auto-loaded when required, its use can be disabled by preventing the module from loading with the following instructions: # echo "install kvm /bin/true" >> /etc/modprobe.d/disable-kvm.conf If the system requires this module to work correctly, this mitigation may not be suitable. If you need further assistance, see the KCS article https://access.redhat.com/solutions/41278 or contact Red Hat Global Support Services.
First published (updated )
Severity
7.8
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

A vulnerability was found in cgroupreleaseagentwrite in kernel/cgroup/cgroup-v1.c in the Linux kernel. In this flaw, under certain circumstances, the cgroups v1 releaseagent feature can be used to escalate privilege and bypass namespace isolation unexpectedly.

Upstream Commit:

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=24f6008564183aa120d07c03d9289519c2fe02af

1 / 4
Source: Red Hat
First published (updated )
Severity
7.8
Use After Free
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

A flaw in the Linux Kernel found. If unprivileged users can mount FUSE filesystems, then can trigger use after free (UAF) that reads of write() buffers, allowing theft of (partial) /etc/shadow hashes or any other data from filesystem.

FUSE allows the userspace filesystem to specify on FUSEOPEN whether the file should use the normal kernel pagecache for handling read()/write() or just send FUSEREAD/FUSEWRITE requests directly to the userspace filesystem (using the flag FOPENDIRECTIO in fuseopenout::openflags).

In FOPENDIRECTIO mode, fusefilewriteiter() calls fusedirectwriteiter(), which normally calls fusedirectio(), which then imports the write buffer with fusegetuserpages(), which uses iovitergetpages() to grab references to userspace pages instead of actually copying memory.

On the filesystem device side, these pages can then either be read to userspace (via fusedevread()), or splice()d over into a pipe using fusedevspliceread() as pipe buffers with &nostealpipebufops.

This is wrong because after fusedevdoread() unlocks the FUSE request, the userspace filesystem can mark the request as completed, causing write() to return. At that point, the write buffer may be reused for other purposes, and the userspace filesystem should no longer have access to it.

1 / 3
Source: Red Hat
First published (updated )
Severity
7.8
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

A random memory access flaw was found in the Linux kernel's GPU i915 kernel driver functionality in the way a user may run malicious code on the GPU. This flaw allows a local user to crash the system or escalate their privileges on the system.

1 / 4
First published (updated )
Severity
7.8
Input Validation
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

A Local Privilege Escalation vulnerability (from any user to root) was found in polkit's pkexec, a SUID-root program that is installed by default on every major Linux distribution.

1 / 3
Source: Red Hat
First published (updated )
Severity
7.8
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

A flaw was found in the way the "flags" member of the new pipe buffer structure was lacking proper initialization in copypagetoiterpipe and pushpipe functions in the Linux kernel and could thus contain stale values. An unprivileged local user could use this flaw to write to pages in the page cache backed by read only files and as such escalate their privileges on the system.

1 / 4
First published (updated )
Severity
7.8
AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

A vulnerability was found in insights-client. This security issue occurs because of insecure file operations or unsafe handling of temporary files and directories that lead to local privilege escalation. Before the insights-client has been registered on the system by root, an unprivileged local user or attacker could create the /var/tmp/insights-client directory (owning the directory with read, write, and execute permissions) on the system. After the insights-client is registered by root, an attacker could then control the directory content that insights are using by putting malicious scripts into it and executing arbitrary code as root (trivially bypassing SELinux protections because insights processes are allowed to disable SELinux system-wide).

1 / 2
Source: NVD
First published (updated )
Severity
7.5
AV:N/AC:H/PR:L/UI:N/S:U/C:L/I:L/A:L

A bug was found in Moby (Docker Engine) where containers were incorrectly started with non-empty inheritable Linux process capabilities, creating an atypical Linux environment and enabling programs with inheritable file capabilities to elevate those capabilities to the permitted set during execve(2). Normally, when executable programs have specified permitted file capabilities, otherwise unprivileged users and processes can execute those programs and gain the specified file capabilities up to the bounding set. Due to this bug, containers which included executable programs with inheritable file capabilities allowed otherwise unprivileged users and processes to additionally gain these inheritable file capabilities up to the container's bounding set. Containers which use Linux users and groups to perform privilege separation inside the container are most directly impacted.

1 / 3
Source: Red Hat
First published (updated )
Severity
7.5
AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H

A flaw was found in python. An improperly handled HTTP response in the HTTP client code of python may allow a remote attacker, who controls the HTTP server, to make the client script enter an infinite loop, consuming CPU time. The highest threat from this vulnerability is to system availability.

1 / 4
First published (updated )
Severity
7.5
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

Apache HTTP Server versions 2.4.20 to 2.4.43. A specially crafted value for the 'Cache-Digest' header in a HTTP/2 request would result in a crash when the server actually tries to HTTP/2 PUSH a resource afterwards. Configuring the HTTP/2 feature via "H2Push off" will mitigate this vulnerability for unpatched servers.

1 / 2
Source: Launchpad
First published (updated )
Severity
7.5
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

cyrus-sasl (aka Cyrus SASL) 2.1.27 has an out-of-bounds write leading to unauthenticated remote denial-of-service in OpenLDAP via a malformed LDAP packet. The OpenLDAP crash is ultimately caused by an off-by-one error in sasladdstring in common.c in cyrus-sasl.

1 / 3
Source: MITRE
First published (updated )
Severity
6.5
AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H

Last updated 25 August 2025

1 / 4
Source: Ubuntu
First published (updated )
Severity
6.5
Use After Free
CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

A use-after-free flaw was found in libvirt. The qemuMonitorUnregister() function in qemuProcessHandleMonitorEOF is called using multiple threads without being adequately protected by a monitor lock. This flaw could be triggered by the virConnectGetAllDomainStats API when the guest is shutting down. An unprivileged client with a read-only connection could use this flaw to perform a denial of service attack by causing the libvirt daemon to crash.

1 / 3
Source: Launchpad
First published (updated )
Severity
5.5
Infoleak
AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N

Impact When running processes using "chroot" isolation, the process being run can examine the environment variables of its immediate parent and grandparent processes (CVE-2021-3602). This isolation type is often used when running buildah in unprivileged containers, and it is often used to do so in CI/CD environments. If sensitive information is exposed to the original buildah process through its environment, that information will unintentionally be shared with child processes which it starts as part of handling RUN instructions or during buildah run. The commands that buildah is instructed to run can read that information if they choose to.

Patches Users should upgrade packages, or images which contain packages, to include version 1.21.3 or later.

Workarounds As a workaround, invoking buildah in a container under env -i to have it started with a reinitialized environment should prevent the leakage.

For more information If you have any questions or comments about this advisory: Open an issue in buildah Email us at the buildah general mailing list, or the podman security mailing list if it's sensitive.

1 / 4
First published (updated )
Severity
5.5
AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

A flaw was found in the Linux kernel. Measuring usage of the shared memory does not scale with large shared memory segment counts which could lead to resource exhaustion and DoS.

1 / 3

Remedy

Mitigation for this issue is either not available or the currently available options does not meet the Red Hat Product Security criteria comprising ease of use and deployment, applicability to widespread installation base or stability.
First published (updated )
Severity
5.3
Use After Free
CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:N/I:N/A:H

A use-after-free vulnerability was discovered in the pngimagefree function in the libpng library. This could lead to denial of service or a potentially exploitable crash when a malformed image is processed.

1 / 4
Source: Mozilla
First published (updated )
Severity
5.3
AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L

Impact Denial of Service, Applications that allow the use of the PBKDF2 algorithm.

Patches A patch is available that sets the maximum number of default rounds.

Workarounds Applications that do not need to use PBKDF2 should simply specify the algorithms use and exclude it from the list. Applications that need to use the algorithm should upgrade to the new version that allows to set a maximum rounds number.

Acknowledgement The issues was reported by Jingcheng Yang and Jianjun Chen from Sichuan University and Zhongguancun Lab

1 / 3
Source: GitHub
First published (updated )

Contact

SecAlerts Pty Ltd.
132 Wickham Terrace
Fortitude Valley,
QLD 4006, Australia
info@secalerts.co
By using SecAlerts services, you agree to our services end-user license agreement. This website is safeguarded by reCAPTCHA and governed by the Google Privacy Policy and Terms of Service. All names, logos, and brands of products are owned by their respective owners, and any usage of these names, logos, and brands for identification purposes only does not imply endorsement. If you possess any content that requires removal, please get in touch with us.
© 2026 SecAlerts Pty Ltd.
ABN: 70 645 966 203, ACN: 645 966 203