HID: core: zero-initialize the report buffer

In the Linux kernel, the following vulnerability has been resolved:

media: uvcvideo: Skip parsing frames of type UVCVSUNDEFINED in uvcparseformat

This can lead to out of bounds writes since frames of this type were not taken into account when calculating the size of the frames buffer in uvcparsestreaming.

In the Linux kernel, the following vulnerability has been resolved:

ALSA: usb-audio: Fix out of bounds reads when finding clock sources

The current USB-audio driver code doesn't check bLength of each descriptor at traversing for clock descriptors. That is, when a device provides a bogus descriptor with a shorter bLength, the driver might hit out-of-bounds reads.

For addressing it, this patch adds sanity checks to the validator functions for the clock descriptor traversal. When the descriptor length is shorter than expected, it's skipped in the loop.

For the clock source and clock multiplier descriptors, we can just check bLength against the sizeof() of each descriptor type. OTOH, the clock selector descriptor of UAC2 and UAC3 has an array of bNrInPins elements and two more fields at its tail, hence those have to be checked in addition to the sizeof() check.

In the Linux kernel, the following vulnerability has been resolved:

ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices

A bogus device can provide a bNumConfigurations value that exceeds the initial value used in usbgetconfiguration for allocating dev->config.

This can lead to out-of-bounds accesses later, e.g. in usbdestroyconfiguration.

An out of bounds write exists in FreeType versions 2.13.0 and below (newer versions of FreeType are not vulnerable) when attempting to parse font subglyph structures related to TrueType GX and variable font files. The vulnerable code assigns a signed short value to an unsigned long and then adds a static value causing it to wrap around and allocate too small of a heap buffer. The code then writes up to 6 signed long integers out of bounds relative to this buffer. This may result in arbitrary code execution. This vulnerability may have been exploited in the wild.

HTTP/2 Rapid reset attack The HTTP/2 protocol allows clients to indicate to the server that a previous stream should be canceled by sending a RSTSTREAM frame. The protocol does not require the client and server to coordinate the cancellation in any way, the client may do it unilaterally. The client may also assume that the cancellation will take effect immediately when the server receives the RSTSTREAM frame, before any other data from that TCP connection is processed.

Abuse of this feature is called a Rapid Reset attack because it relies on the ability for an endpoint to send a RSTSTREAM frame immediately after sending a request frame, which makes the other endpoint start working and then rapidly resets the request. The request is canceled, but leaves the HTTP/2 connection open.

The HTTP/2 Rapid Reset attack built on this capability is simple: The client opens a large number of streams at once as in the standard HTTP/2 attack, but rather than waiting for a response to each request stream from the server or proxy, the client cancels each request immediately.

The ability to reset streams immediately allows each connection to have an indefinite number of requests in flight. By explicitly canceling the requests, the attacker never exceeds the limit on the number of concurrent open streams. The number of in-flight requests is no longer dependent on the round-trip time (RTT), but only on the available network bandwidth.

In a typical HTTP/2 server implementation, the server will still have to do significant amounts of work for canceled requests, such as allocating new stream data structures, parsing the query and doing header decompression, and mapping the URL to a resource. For reverse proxy implementations, the request may be proxied to the backend server before the RSTSTREAM frame is processed. The client on the other hand paid almost no costs for sending the requests. This creates an exploitable cost asymmetry between the server and the client.

Multiple software artifacts implementing HTTP/2 are affected. This advisory was originally ingested from the swift-nio-http2 repo advisory and their original conent follows.

swift-nio-http2 specific advisory swift-nio-http2 is vulnerable to a denial-of-service vulnerability in which a malicious client can create and then reset a large number of HTTP/2 streams in a short period of time. This causes swift-nio-http2 to commit to a large amount of expensive work which it then throws away, including creating entirely new Channels to serve the traffic. This can easily overwhelm an EventLoop and prevent it from making forward progress.

swift-nio-http2 1.28 contains a remediation for this issue that applies reset counter using a sliding window. This constrains the number of stream resets that may occur in a given window of time. Clients violating this limit will have their connections torn down. This allows clients to continue to cancel streams for legitimate reasons, while constraining malicious actors.

Summary

Log4j versions prior to 2.16.0 are subject to a remote code execution vulnerability via the ldap JNDI parser. As per Apache's Log4j security guide: Apache Log4j2 <=2.14.1 JNDI features used in configuration, log messages, and parameters do not protect against attacker controlled LDAP and other JNDI related endpoints. An attacker who can control log messages or log message parameters can execute arbitrary code loaded from LDAP servers when message lookup substitution is enabled. From log4j 2.16.0, this behavior has been disabled by default.

Log4j version 2.15.0 contained an earlier fix for the vulnerability, but that patch did not disable attacker-controlled JNDI lookups in all situations. For more information, see the Updated advice for version 2.16.0 section of this advisory.

Impact

Logging untrusted or user controlled data with a vulnerable version of Log4J may result in Remote Code Execution (RCE) against your application. This includes untrusted data included in logged errors such as exception traces, authentication failures, and other unexpected vectors of user controlled input.

Affected versions

Any Log4J version prior to v2.15.0 is affected to this specific issue.

The v1 branch of Log4J which is considered End Of Life (EOL) is vulnerable to other RCE vectors so the recommendation is to still update to 2.16.0 where possible.

Security releases Additional backports of this fix have been made available in versions 2.3.1, 2.12.2, and 2.12.3

Affected packages Only the org.apache.logging.log4j:log4j-core package is directly affected by this vulnerability. The org.apache.logging.log4j:log4j-api should be kept at the same version as the org.apache.logging.log4j:log4j-core package to ensure compatability if in use.

Remediation Advice

Updated advice for version 2.16.0

The Apache Logging Services team provided updated mitigation advice upon the release of version 2.16.0, which disables JNDI by default and completely removes support for message lookups. Even in version 2.15.0, lookups used in layouts to provide specific pieces of context information will still recursively resolve, possibly triggering JNDI lookups. This problem is being tracked as CVE-2021-45046. More information is available on the GitHub Security Advisory for CVE-2021-45046.

Users who want to avoid attacker-controlled JNDI lookups but cannot upgrade to 2.16.0 must ensure that no such lookups resolve to attacker-provided data and ensure that the the JndiLookup class is not loaded.

Please note that Log4J v1 is End Of Life (EOL) and will not receive patches for this issue. Log4J v1 is also vulnerable to other RCE vectors and we recommend you migrate to Log4J 2.16.0 where possible.

Apache Tomcat contains a path equivalence vulnerability that allows a remote attacker to execute code, disclose information, or inject malicious content via a partial PUT request. This vulnerability can be chained with CVE‑2026‑34486.

An attacker was able to achieve code execution in the content process by exploiting a use-after-free in Animation timelines. We have had reports of this vulnerability being exploited in the wild.

Accessibility. An authorization issue was addressed with improved state management.

Spreadsheet::ParseExcel contains a remote code execution vulnerability due to passing unvalidated input from a file into a string-type “eval”. Specifically, the issue stems from the evaluation of Number format strings within the Excel parsing logic.

Chromium: CVE-2023-7024 Heap buffer overflow in WebRTC

Chromium: CVE-2023-6345 Integer overflow in Skia

Last updated 21 August 2024

Chromium: CVE-2023-5217 Heap buffer overflow in vp8 encoding in libvpx

Chromium: CVE-2023-4863 Heap buffer overflow in WebP

Chromium: CVE-2023-4762 Type Confusion in V8

Roundcube before 1.4.14, 1.5.x before 1.5.4, and 1.6.x before 1.6.3 allows XSS via text/plain e-mail messages with crafted links because of program/lib/Roundcube/rcubestringreplacer.php behavior.

Chromium: CVE-2023-3079 Type Confusion in V8

Chromium: CVE-2023-2136 Integer overflow in Skia

Chromium: CVE-2023-2033 Type Confusion in V8

A fully compromised ESXi host can force VMware Tools to fail to authenticate host-to-guest operations, impacting the confidentiality and integrity of the guest virtual machine.

Apache Log4j <=2.14.1 JNDI features used in configuration, log messages, and parameters do not protect against attacker controlled LDAP and other JNDI related endpoints. An attacker who can control log messages or log message parameters can execute arbitrary code loaded from LDAP servers when message lookup substitution is enabled (CVE-2021-44228).

An attacker was able to inject an event handler into a privileged object that would allow arbitrary JavaScript execution in the parent process. Note: This vulnerability affects Desktop Firefox only, it does not affect mobile versions of Firefox. This vulnerability affects Firefox < 124.0.1 and Firefox ESR < 115.9.1.

Chromium: CVE-2023-6347 Use after free in Mojo

A division-by-zero error on some AMD processors can potentially return speculative data resulting in loss of confidentiality.

Chromium: CVE-2023-6350 Out of bounds memory access in libavif

Chromium: CVE-2023-6351 Use after free in libavif

Chromium: CVE-2023-6348 Type Confusion in Spellcheck

Chromium: CVE-2023-6346 Use after free in WebAudio