Netgate pfSense CE 2.8.0 allows code execution in the XMLRPC API via pfsense.execphp. NOTE: the Supplier disputes this because the API call is only available to admins and they are intentionally allowed to execute PHP code.

Netgate pfSense CE 2.7.2 allows code execution by using the module installer with a backup file with a serialized PHP object containing the postrebootcommands property. NOTE: the Supplier disputes this because this installer is only available to admins and they are intentionally allowed to execute PHP code.

Netgate pfSense CE Suricata Path Traversal Remote Code Execution Vulnerability. This vulnerability allows remote attackers to create arbitrary files on affected installations of Netgate pfSense. Authentication is required to exploit this vulnerability.

The specific flaw exists within the Suricata package. The issue results from the lack of proper validation of a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to create files in the context of root. Was ZDI-CAN-28085.

Netgate pfSense CE 2.7.0 through 2.9.0 contains an OS command injection vulnerability that allows authenticated users with QinQ edit privilege to run commands by storing an unvalidated parent interface name. Attackers can save a crafted 'if' value, then edit the QinQ entry so it is interpolated into ifconfig shell commands, executing commands as root.

Netgate pfSense CE through 2.9.0 contains an OS command injection vulnerability that allows authenticated users to execute commands as root by supplying a crafted wireless parent interface name. Attackers with limited Wireless Edit or Interface Assignments privileges can submit values like ath0;<cmd> via interfaceswirelessedit.php or interfacesassign.php, which interfacewirelessclone() interpolates unescaped into an ifconfig shell command.

Netgate pfSense CE through 2.9.0 contains an OS command injection vulnerability that allows authenticated users with gateway edit privileges to execute commands as root by injecting shell metacharacters into an IPv6 link-local zone index. Attackers can set a gateway Monitor IP whose unvalidated zone carries a payload, which startdpinger() passes unescaped to the dpinger shell command when monitoring is applied.

Netgate pfSense CE 2.7.0 through 2.9.0 contains a configuration injection vulnerability that allows authenticated users with IPsec Mobile privileges to execute commands as root via the loginbanner field. Attackers can submit a single-line banner containing '}' to escape the unquoted strongswan.conf attr value and define charon.start-scripts entries that charon executes as root on restart.

Netgate pfSense CE 2.7.0 through 2.9.0 contains an OS command injection vulnerability that allows authenticated users with Traffic Shaper Limiters privileges to execute root commands by tampering with the limiter number field. Attackers can submit a malicious hidden 'number' value when editing a limiter, then delete it so deletequeue() passes the unquoted value to dnctl via /bin/sh as root.

pfSense CE 2.4.5 through 2.9.0 contains an OS command injection vulnerability that allows authenticated WebGUI users with Advanced Admin Access privilege to execute commands as root via Login Protection settings. Attackers can submit sshguard threshold, block time, or detection time values containing newlines or $(...) that are written unvalidated to sshguard.conf and sourced as root on restart.

Rejected reason: This CVE ID has been rejected because it does not describe a security vulnerability.

pfSense CE through 2.9.0 contains a crontab injection vulnerability in interfacespppsedit.php that allows authenticated users to execute commands as root by injecting newlines into the ptpid or reset hour/minute fields. Attackers holding the 'WebCfg - Interfaces: PPPs: Edit' privilege can submit crafted POST values that configurecron() writes unescaped into /etc/crontab, running arbitrary root commands on schedule.

Rejected reason: This CVE ID has been rejected because it does not describe a security vulnerability.

Netgate pfSense CE through 2.9.0 contains an OS command injection vulnerability that allows authenticated users with Virtual IP edit privileges to execute commands as root by storing an unvalidated CARP VHID. Attackers can supply a VHID containing shell metacharacters that executes via interfaceipaliasconfigure() ifconfig calls or getcarpinterfacestatus() when CARP status is rendered.

In Netgate pfSense Plus before 26.07 and pfSense CE before 2.9.0, a Local File Inclusion (LFI) vulnerability in the Dashboard (index.php) widget sequence data handling allows an authenticated attacker to execute arbitrary PHP code. To exploit this, an attacker with privileges to modify Dashboard settings and write arbitrary files to the pfSense firewall system (e.g., /tmp/test.widget.php) can submit a crafted widget sequence value containing a path traversal payload (e.g., ../../../../../../../../../../../tmp/test). The Dashboard will subsequently read and execute the arbitrary PHP file as if it were a standard widget.

pfSense CE through 2.9.0 contains an OS command injection vulnerability in the OpenVPN openvpn.connectasync.sh script that allows authenticated VPN users to execute commands as root via crafted usernames. Attackers authenticated through RADIUS or LDAP can use usernames containing single quotes and shell metacharacters to break out of the eval'd pfctl anchor name on connect or disconnect.

Netgate pfSense CE through 2.9.0 contains a php.ini injection vulnerability that allows authenticated users with General Setup privileges to inject directives by submitting an unvalidated timezone value. Attackers can embed a quote and newline to add autoprependfile pointing at /var/db/zoneinfo, executing PHP as root after php.ini is regenerated at boot or php-fpm restart.

Netgate pfSense CE through 2.9.0 contains a newline injection vulnerability in servicespppoeedit.php that allows privileged users to inject mpd.secret entries via unvalidated username POST fields. Attackers with the PPPoE Server Edit privilege can add a line whose secret begins with '!', making mpd5 run commands as root when a PPPoE client authenticates.

Rejected reason: This CVE ID has been rejected because it does not describe a security vulnerability.

Netgate pfSense CE through 2.9.0 contains a local file read vulnerability that allows users with the Dynamic DNS client privilege to read files as root by setting a file:// custom Update URL in servicesdyndnsedit.php. Attackers can set a non-matching Result Match string so checkStatus() logs file contents such as /conf/config.xml or /etc/master.passwd to the system log.

In Netgate pfSense CE 2.8.0, the "WebCfg - Diagnostics: Command" privilege allows reading arbitrary files via diagcommand.php dlPath directory traversal. NOTE: the Supplier's perspective is that this is intended behavior for this privilege level, and that system administrators are informed through both the product documentation and UI.

Summary

Terrapin is a prefix truncation attack targeting the SSH protocol. More precisely, Terrapin breaks the integrity of SSH's secure channel. By carefully adjusting the sequence numbers during the handshake, an attacker can remove an arbitrary amount of messages sent by the client or server at the beginning of the secure channel without the client or server noticing it.

Mitigations

To mitigate this protocol vulnerability, OpenSSH suggested a so-called "strict kex" which alters the SSH handshake to ensure a Man-in-the-Middle attacker cannot introduce unauthenticated messages as well as convey sequence number manipulation across handshakes.

Warning: To take effect, both the client and server must support this countermeasure.

As a stop-gap measure, peers may also (temporarily) disable the affected algorithms and use unaffected alternatives like AES-GCM instead until patches are available.

Details

The SSH specifications of ChaCha20-Poly1305 (chacha20-poly1305@openssh.com) and Encrypt-then-MAC (-etm@openssh.com MACs) are vulnerable against an arbitrary prefix truncation attack (a.k.a. Terrapin attack). This allows for an extension negotiation downgrade by stripping the SSHMSGEXTINFO sent after the first message after SSHMSGNEWKEYS, downgrading security, and disabling attack countermeasures in some versions of OpenSSH. When targeting Encrypt-then-MAC, this attack requires the use of a CBC cipher to be practically exploitable due to the internal workings of the cipher mode. Additionally, this novel attack technique can be used to exploit previously unexploitable implementation flaws in a Man-in-the-Middle scenario.

The attack works by an attacker injecting an arbitrary number of SSHMSGIGNORE messages during the initial key exchange and consequently removing the same number of messages just after the initial key exchange has concluded. This is possible due to missing authentication of the excess SSHMSGIGNORE messages and the fact that the implicit sequence numbers used within the SSH protocol are only checked after the initial key exchange.

In the case of ChaCha20-Poly1305, the attack is guaranteed to work on every connection as this cipher does not maintain an internal state other than the message's sequence number. In the case of Encrypt-Then-MAC, practical exploitation requires the use of a CBC cipher; while theoretical integrity is broken for all ciphers when using this mode, message processing will fail at the application layer for CTR and stream ciphers.

For more details see https://terrapin-attack.com.

Impact

This attack targets the specification of ChaCha20-Poly1305 (chacha20-poly1305@openssh.com) and Encrypt-then-MAC (-etm@openssh.com), which are widely adopted by well-known SSH implementations and can be considered de-facto standard. These algorithms can be practically exploited; however, in the case of Encrypt-Then-MAC, we additionally require the use of a CBC cipher. As a consequence, this attack works against all well-behaving SSH implementations supporting either of those algorithms and can be used to downgrade (but not fully strip) connection security in case SSH extension negotiation (RFC8308) is supported. The attack may also enable attackers to exploit certain implementation flaws in a man-in-the-middle (MitM) scenario.

The SSH transport protocol with certain OpenSSH extensions, found in OpenSSH before 9.6 and other products, allows remote attackers to bypass integrity checks such that some packets are omitted (from the extension negotiation message), and a client and server may consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack. This occurs because the SSH Binary Packet Protocol (BPP), implemented by these extensions, mishandles the handshake phase and mishandles use of sequence numbers. For example, there is an effective attack against SSH's use of ChaCha20-Poly1305 (and CBC with Encrypt-then-MAC). The bypass occurs in chacha20-poly1305@openssh.com and (if CBC is used) the -etm@openssh.com MAC algorithms. This also affects Maverick Synergy Java SSH API before 3.1.0-SNAPSHOT, Dropbear through 2022.83, Ssh before 5.1.1 in Erlang/OTP, PuTTY before 0.80, AsyncSSH before 2.14.2, golang.org/x/crypto before 0.17.0, libssh before 0.10.6, libssh2 through 1.11.0, Thorn Tech SFTP Gateway before 3.4.6, Tera Term before 5.1, Paramiko before 3.4.0, jsch before 0.2.15, SFTPGo before 2.5.6, Netgate pfSense Plus through 23.09.1, Netgate pfSense CE through 2.7.2, HPN-SSH through 18.2.0, ProFTPD before 1.3.8b (and before 1.3.9rc2), ORYX CycloneSSH before 2.3.4, NetSarang XShell 7 before Build 0144, CrushFTP before 10.6.0, ConnectBot SSH library before 2.2.22, Apache MINA sshd through 2.11.0, sshj through 0.37.0, TinySSH through 20230101, trilead-ssh2 6401, LANCOM LCOS and LANconfig, FileZilla before 3.66.4, Nova before 11.8, PKIX-SSH before 14.4, SecureCRT before 9.4.3, Transmit5 before 5.10.4, Win32-OpenSSH before 9.5.0.0p1-Beta, WinSCP before 6.2.2, Bitvise SSH Server before 9.32, Bitvise SSH Client before 9.33, KiTTY through 0.76.1.13, the net-ssh gem 7.2.0 for Ruby, the mscdex ssh2 module before 1.15.0 for Node.js, the thrussh library before 0.35.1 for Rust, and the Russh crate before 0.40.2 for Rust.

The SSH transport protocol with certain OpenSSH extensions, found in OpenSSH before 9.6 and other products, allows remote attackers to bypass integrity checks such that some packets are omitted (from the extension negotiation message), and a client and server may consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack. This occurs because the SSH Binary Packet Protocol (BPP), implemented by these extensions, mishandles the handshake phase and mishandles use of sequence numbers. For example, there is an effective attack against SSH's use of ChaCha20-Poly1305 (and CBC with Encrypt-then-MAC). The bypass occurs in chacha20-poly1305@openssh.com and (if CBC is used) the -etm@openssh.com MAC algorithms. This also affects Maverick Synergy Java SSH API before 3.1.0-SNAPSHOT, Dropbear through 2022.83, Ssh before 5.1.1 in Erlang/OTP, PuTTY before 0.80, AsyncSSH before 2.14.2, golang.org/x/crypto before 0.17.0, libssh before 0.10.6, libssh2 through 1.11.0, Thorn Tech SFTP Gateway before 3.4.6, Tera Term before 5.1, Paramiko before 3.4.0, jsch before 0.2.15, SFTPGo before 2.5.6, Netgate pfSense Plus through 23.09.1, Netgate pfSense CE through 2.7.2, HPN-SSH through 18.2.0, ProFTPD before 1.3.8b (and before 1.3.9rc2), ORYX CycloneSSH before 2.3.4, NetSarang XShell 7 before Build 0144, CrushFTP before 10.6.0, ConnectBot SSH library before 2.2.22, Apache MINA sshd through 2.11.0, sshj through 0.37.0, TinySSH through 20230101, trilead-ssh2 6401, LANCOM LCOS and LANconfig, FileZilla before 3.66.4, Nova before 11.8, PKIX-SSH before 14.4, SecureCRT before 9.4.3, Transmit5 before 5.10.4, Win32-OpenSSH before 9.5.0.0p1-Beta, WinSCP before 6.2.2, Bitvise SSH Server before 9.32, Bitvise SSH Client before 9.33, KiTTY through 0.76.1.13, the net-ssh gem 7.2.0 for Ruby, the mscdex ssh2 module before 1.15.0 for Node.js, the thrussh library before 0.35.1 for Rust, and the Russh crate before 0.40.2 for Rust.

Netgate pfSense CE (prior to 2.8.0 beta release) and corresponding Plus builds is vulnerable to Cross-site scripting (XSS) in the Automatic Configuration Backup (ACB) service, allowing remote attackers to execute arbitrary JavaScript, delete backups, or leak sensitive information via an unsanitized "reason" field and a derivable device key generated from the public SSH key.

Cross-Site Scripting (XSS) vulnerability in the RSS Widget of Netgate pfSense Plus (versions 26.03, 25.11.1) and pfSense CE (version 2.8.1) allows remote authenticated attackers to inject arbitrary JavaScript via malicious content in an RSS feed title. The injected script executes in the browser of any authenticated user who views the dashboard, due to insufficient sanitization of feed title data before rendering in the widget.

In pfSense CE /usr/local/www/snort/snortipreputation.php, the value of the iplist parameter is not sanitized of directory traversal-related characters/strings before being used to check if a file exists. While the contents of the file cannot be read, the server reveals whether a file exists, which allows an attacker to enumerate files on the target. The attacker must be authenticated with at least "WebCfg - Services: Snort package" permissions.

pfSense Plus before 26.07 and pfSense CE through 2.8.1 contain a stored cross-site scripting vulnerability in the Traffic Graphs top-talkers feature, where PTR records returned by reverse DNS lookups are incorporated without sanitization into AJAX responses and rendered as HTML through a DOM sink in the administrator interface. An attacker who controls a PTR record and generates sufficient traffic to appear as a top talker can execute arbitrary JavaScript in an administrator's browser, gaining access to the authenticated session context and same-origin access to the firewall management interface, enabling account creation and arbitrary OS command execution.

Netgate pfSense CE from 2.7.1 through 2.9.0 contains a CRLF injection vulnerability in servicesunboundadvanced.php that allows authenticated users with DNS Resolver: Advanced privilege to inject Unbound directives. Attackers can embed CR/LF characters in the unvalidated sockqueuetimeout parameter, which is written raw into unbound.conf, to override local records and forwarding for all clients.

Netgate pfSense CE through 2.9.0 contains a CRLF injection vulnerability in servicesunboundacls.php that allows authenticated users with the DNS Resolver: Access Lists privilege to inject Unbound configuration directives. Attackers can embed CR/LF characters in the aclname or aclaction fields written to accesslists.conf to add local-data, local-zone, or forward-zone directives and control DNS answers served to LAN clients.

Netgate pfSense CE 2.3.0 through 2.9.0 contains a stored cross-site scripting vulnerability that allows authenticated users with Firewall: Rules or NAT: Port Forward privileges to inject scripts via the separator color field. Attackers can submit a crafted separator[] color value that displayseparator() renders unencoded into class attributes, executing in administrators' browsers to perform WebGUI actions with their privileges.