Summary In affected versions, the HTTP Host request header was not validated before being used to reconstruct request.url. Because the routing algorithm relies on the raw HTTP path while request.url is rebuilt from the Host header, a malformed header could make request.url.path differ from the path that was actually requested. Middleware and endpoints that apply security restrictions based on request.url (rather than the raw scope path) could therefore be bypassed.

Details When a client requests http://example.com/foo, it sends:

http GET /foo HTTP/1.1 Host: example.com

Affected versions reconstructed the URL by concatenating http://{host}{path} and re-parsing the result. The Host value is only valid as a uri-host [ ":" port ] per RFC 9112 §3.2, where uri-host follows the restricted host grammar of RFC 3986 §3.2.2. When it contains characters outside that grammar - notably /, ?, or # - those characters move the path/query/fragment boundaries during re-parsing, so the parsed request.url.path no longer matches the path the server actually received. For example:

http GET /foo HTTP/1.1 Host: example.com/abc?bar=

reconstructs to http://example.com/abc?bar=/foo, whose parsed path is /abc - even though routing used the real path /foo. The router still dispatches to /foo and the endpoint executes, but any middleware or code that reads request.url.path sees /abc, so path-based authorization checks can be bypassed.

Impact Any application running an affected version that relies on request.url (or request.url.path) for security-sensitive decisions is affected. The most common case is middleware that gates access to certain path prefixes based on request.url.path. Deployments fronted by a proxy or load balancer are mitigated only if that proxy rejects or normalizes the malformed Host header before forwarding and the application does not trust attacker-controlled host headers (e.g. X-Forwarded-Host) elsewhere.

Mitigation Upgrade to a patched version, which validates the Host header against the grammar of RFC 9112 §3.2 / RFC 3986 §3.2.2 when constructing request.url and falls back to scope["server"] for malformed values.

A vulnerability identified in NetIQ Advance Authentication that leaks sensitive server information. This issue affects NetIQ Advance Authentication version before 6.3.5.1

Accessibility. A logic issue was addressed with improved checks.

A flaw was found in rsync which could be triggered when rsync compares file checksums. This flaw allows an attacker to manipulate the checksum length (s2length) to cause a comparison between a checksum and uninitialized memory and leak one byte of uninitialized stack data at a time.

A flaw was found in the modproxycluster in the Apache server. A malicious user can add a script in the 'alias' parameter in the URL to trigger the stored cross-site scripting vulnerability. by adding a script on the alias parameter on the URL it adds a new virtual host and adds the script to the cluster-manager page. The impact of this vulnerability is considered as Low as the clustermanager URL should NOT be exposed outside and protected by user/password.

Artifex Ghostscript allows -dSAFER bypass and remote command execution via .rsdparams type confusion with a "/OutputFile.

Adobe Flash Player 21.0.0.226 and earlier allows remote attackers to execute arbitrary code via unspecified vectors, as exploited in the wild in May 2016.

crypto: algifaead - Revert to operating out-of-place

A vulnerability was found in OpenSSH when the VerifyHostKeyDNS option is enabled. A machine-in-the-middle attack can be performed by a malicious machine impersonating a legit server. This issue occurs due to how OpenSSH mishandles error codes in specific conditions when verifying the host key. For an attack to be considered successful, the attacker needs to manage to exhaust the client's memory resource first, turning the attack complexity high.

A security regression (CVE-2006-5051) was discovered in OpenSSH's server (sshd). There is a race condition which can lead sshd to handle some signals in an unsafe manner. An unauthenticated, remote attacker may be able to trigger it by failing to authenticate within a set time period.

An attacker can leverage sudo's -R (--chroot) option to run arbitrary commands as root, even if they are not listed in the sudoers file. Sudo versions 1.9.14 to 1.9.17 inclusive are affected.

A vulnerability allowing to elevate privileges from the abrt user to root was reported. If a program starting with the name "abrt" crashes, abrt-hook-ccpp will write the coredump to /var/tmp/abrt/$filename-coredump or /var/spool/abrt/$filename-coredump. From abrt-hook-ccpp.c:

if (lastslash && strncmp(++lastslash, "abrt", 4) == 0) { / If abrtd/abrt-foo crashes, we don't want to create a directory, since that can make new copy of abrtd to process it, and maybe crash again... Unlike dirs, mere files are ignored by abrtd. / if (snprintf(path, sizeof(path), "%s/%s-coredump", gsettingsdumplocation, lastslash) >= sizeof(path)) errormsganddie("Error saving '%s': truncated long file path", path);

int abrtcorefd = xopen3(path, OWRONLY | OCREAT | OTRUNC, 0600);

The call to xopen3() does not include the flag ONOFOLLOW and is therefore vulnerable to a symlink attack.

This vulnerability is not exploitable on RHEL installations with default configuration. It can be exploitable if the system is configured to use non-RHN yum repositories. This is because yum is normally not usable by non-root users if the only configured repositories are RHN.

Note: This security flaw has been split from bug #1262252.

libuser before 0.56.13-8 and 0.60 before 0.60-7, as used in the userhelper program in the usermode package, directly modifies /etc/passwd, which allows local users to cause a denial of service (inconsistent file state) by causing an error during the modification. NOTE: this issue can be combined with CVE-2015-3245 to gain privileges.

Apache Tomcat contains an unspecified vulnerability that allows for remote code execution if JmxRemoteLifecycleListener is used and an attacker can reach Java Management Extension (JMX) ports. This CVE exists because this listener wasn't updated for consistency with the Oracle patched issues for CVE-2016-3427 which affected credential types.

Last updated 25 August 2025

A flaw was found in rsync. It could allow a server to enumerate the contents of an arbitrary file from the client's machine. This issue occurs when files are being copied from a client to a server. During this process, the rsync server will send checksums of local data to the client to compare with in order to determine what data needs to be sent to the server. By sending specially constructed checksum values for arbitrary files, an attacker may be able to reconstruct the data of those files byte-by-byte based on the responses from the client.

A Local Privilege Escalation vulnerability (from any user to root) was found in polkit's pkexec, a SUID-root program that is installed by default on every major Linux distribution.

By using a specially crafted HTTP request, the authentication of the jmx-console can be bypassed, as the access restrictions only apply for GET and POST.

Current setting is:

<security-constraint> <web-resource-collection> <web-resource-name>HtmlAdaptor</web-resource-name> <description>An example security config that only allows users with the role JBossAdmin to access the HTML JMX console web application </description> <url-pattern>/</url-pattern> <http-method>GET</http-method> <http-method>POST</http-method> </web-resource-collection> <auth-constraint> <role-name>JBossAdmin</role-name> </auth-constraint> </security-constraint>

and should be changed to block ALL http-methods.

Acknowledgements:

Red Hat would like to thank Stefano Di Paola and Giorgio Fedon of Minded Security for responsibly reporting this issue.

The Web Console (aka web-console) in JBossAs in Red Hat JBoss Enterprise Application Platform (aka JBoss EAP or JBEAP) 4.2 before 4.2.0.CP09 and 4.3 before 4.3.0.CP08 performs access control only for the GET and POST methods, which allows remote attackers to obtain sensitive information via an unspecified request that uses a different method.

A flaw was found in grub2. When reading data from a squash4 filesystem, grub's squash4 fs module uses user-controlled parameters from the filesystem geometry to determine the internal buffer size, however, it improperly checks for integer overflows. A maliciously crafted filesystem may lead some of those buffer size calculations to overflow, causing it to perform a grubmalloc() operation with a smaller size than expected. As a result, the directread() will perform a heap based out-of-bounds write during data reading. This flaw may be leveraged to corrupt grub's internal critical data and may result in arbitrary code execution, by-passing secure boot protections.

Adobe Flash Player com.adobe.tvsdk.mediacore.metadata Use After Free Vulnerability

In Jboss Application Server as shipped with Red Hat Enterprise Application Platform 5.2, it was found that the doFilter method in the ReadOnlyAccessFilter of the HTTP Invoker does not restrict classes for which it performs deserialization and thus allowing an attacker to execute arbitrary code via crafted serialized data.

HTTP/2 Rapid reset attack The HTTP/2 protocol allows clients to indicate to the server that a previous stream should be canceled by sending a RSTSTREAM frame. The protocol does not require the client and server to coordinate the cancellation in any way, the client may do it unilaterally. The client may also assume that the cancellation will take effect immediately when the server receives the RSTSTREAM frame, before any other data from that TCP connection is processed.

Abuse of this feature is called a Rapid Reset attack because it relies on the ability for an endpoint to send a RSTSTREAM frame immediately after sending a request frame, which makes the other endpoint start working and then rapidly resets the request. The request is canceled, but leaves the HTTP/2 connection open.

The HTTP/2 Rapid Reset attack built on this capability is simple: The client opens a large number of streams at once as in the standard HTTP/2 attack, but rather than waiting for a response to each request stream from the server or proxy, the client cancels each request immediately.

The ability to reset streams immediately allows each connection to have an indefinite number of requests in flight. By explicitly canceling the requests, the attacker never exceeds the limit on the number of concurrent open streams. The number of in-flight requests is no longer dependent on the round-trip time (RTT), but only on the available network bandwidth.

In a typical HTTP/2 server implementation, the server will still have to do significant amounts of work for canceled requests, such as allocating new stream data structures, parsing the query and doing header decompression, and mapping the URL to a resource. For reverse proxy implementations, the request may be proxied to the backend server before the RSTSTREAM frame is processed. The client on the other hand paid almost no costs for sending the requests. This creates an exploitable cost asymmetry between the server and the client.

Multiple software artifacts implementing HTTP/2 are affected. This advisory was originally ingested from the swift-nio-http2 repo advisory and their original conent follows.

swift-nio-http2 specific advisory swift-nio-http2 is vulnerable to a denial-of-service vulnerability in which a malicious client can create and then reset a large number of HTTP/2 streams in a short period of time. This causes swift-nio-http2 to commit to a large amount of expensive work which it then throws away, including creating entirely new Channels to serve the traffic. This can easily overwhelm an EventLoop and prevent it from making forward progress.

swift-nio-http2 1.28 contains a remediation for this issue that applies reset counter using a sliding window. This constrains the number of stream resets that may occur in a given window of time. Clients violating this limit will have their connections torn down. This allows clients to continue to cancel streams for legitimate reasons, while constraining malicious actors.

A use-after-free vulnerability in the Linux kernel's netfilter: nftables component can be exploited to achieve local privilege escalation.

The nftverdictinit() function allows positive values as drop error within the hook verdict, and hence the nfhookslow() function can cause a double free vulnerability when NFDROP is issued with a drop error which resembles NFACCEPT.

We recommend upgrading past commit f342de4e2f33e0e39165d8639387aa6c19dff660.

A crafted request uri-path can cause modproxy to forward the request to an origin server choosen by the remote user. This issue affects Apache HTTP Server 2.4.48 and earlier.

Multiple vulnerabilities in the Java Runtime Environment (JRE) component in Oracle Java SE 7 Update 6 and earlier allow remote attackers to execute arbitrary code via a crafted applet that bypasses SecurityManager restrictions by (1) using com.sun.beans.finder.ClassFinder.findClass and leveraging an exception with the forName method to access restricted classes from arbitrary packages such as sun.awt.SunToolkit, then (2) using "reflection with a trusted immediate caller" to leverage the getField method to access and modify private fields, as exploited in the wild in August 2012 using Gondzz.class and Gondvv.class.

A vulnerability was discovered in Tomcat where if a servlet context was configured with readonly=false and HTTP PUT requests were allowed, an attacker could upload a JSP file to that context and achieve code execution.

Unspecified vulnerability in the Java Runtime Environment (JRE) component in Oracle Java SE 7 update 4 and earlier, 6 update 32 and earlier, 5 update 35 and earlier, and 1.4.237 and earlier allows remote attackers to affect confidentiality, integrity, and availability via unknown vectors related to Hotspot.

A missing bounds check was found in the way OpenSSL handled TLS heartbeat extension packets. This flaw could be used to reveal up to 64k of memory from a connected client or server.

Only 1.0.1 releases of OpenSSL are affected including 1.0.1f (and 1.0.2 betas)

The following upstream commit introduced TLS/DTLS heatbeat support and also this issue:

http://git.openssl.org/gitweb/?p=openssl.git;a=commitdiff;h=4817504

A flaw was found in the bash functionality that evaluates specially formatted environment variables passed to it from another environment. An attacker could use this feature to override or bypass restrictions to the environment to execute shell commands before restrictions have been applied. Certain services and applications allow remote unauthenticated attackers to provide environment variables, allowing them to exploit this issue.

Acknowledgements:

Red Hat would like to thank Stephane Chazelas for reporting this issue.