Deserialization of Untrusted Data vulnerability in Apache Camel.

This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.

The camel-hazelcast component applies a default Hazelcast JavaSerializationFilterConfig to the instances it creates from its own configuration, a protection introduced by CVE-2026-43865. That change did not reach two of the configuration paths Camel builds itself, so those paths continued to create Hazelcast instances whose Java deserialization is unrestricted. ReplicatedHazelcastAggregationRepository extends HazelcastAggregationRepository but overrides doStart() without calling super.doStart(), keeping its own copy of the bootstrap block, and therefore never received the filter: a route using it without supplying a hazelcastInstance starts a Hazelcast member that deserializes values read from the backing ReplicatedMap with no class restriction. HazelcastDefaultComponent#getOrCreateHzClientInstance() builds its own ClientConfig when hazelcastMode=client is selected and neither a referenced ClientConfig nor hazelcastConfigUri is supplied, and likewise applied no filter, so client-mode endpoints behaved differently from node-mode endpoints for an otherwise identical configuration. In both cases an attacker able to publish into the Hazelcast cluster that the affected instance is attached to can cause a serialized Java object of their choosing to be deserialized inside Hazelcast's own serialization layer, before Camel processes the exchange, resulting in remote code execution. Hazelcast clusters have neither authentication nor TLS enabled by default. Selecting client mode is a topology choice rather than a security option, so neither path required the deployment to opt in to unsafe behaviour.

Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.1. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. For deployments that cannot upgrade immediately, supply an explicit Hazelcast configuration carrying a JavaSerializationFilterConfig, or inject a pre-built HazelcastInstance, since a user-supplied configuration is never overwritten by Camel. Alternatively set the JVM-wide filter -Djdk.serialFilter=!java.net.;java.;javax.;org.apache.camel.;! and enable Hazelcast cluster authentication and TLS to restrict who can reach the cluster.

Deserialization of Untrusted Data vulnerability in Apache Camel CassandraQL Component AggregationRepository which is vulnerable to unsafe deserialization. Under specific conditions it is possible to deserialize malicious payload.This issue affects Apache Camel: from 3.0.0 before 3.21.4, from 3.22.0 before 3.22.1, from 4.0.0 before 4.0.4, from 4.1.0 before 4.4.0.

Users are recommended to upgrade to version 4.4.0, which fixes the issue. If users are on the 4.0.x LTS releases stream, then they are suggested to upgrade to 4.0.4. If users are on 3.x, they are suggested to move to 3.21.4 or 3.22.1

Improper Input Validation, Improper Access Control vulnerability in Apache Camel in Camel Mongodb Gridfs component.

The camel-mongodb-gridfs producer selects the GridFS operation to perform from the gridfs.operation Exchange header when the endpoint's operation parameter is not set - which is the default. The control-header constants (GridFsConstants.GRIDFSOPERATION, GRIDFSOBJECTID, GRIDFSMETADATA, GRIDFSCHUNKSIZE, GRIDFSFILEIDPRODUCED) were the plain strings gridfs.operation, gridfs.objectid, gridfs.metadata, gridfs.chunksize and gridfs.fileid. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a mongodb-gridfs: producer with no explicit operation, any HTTP client could therefore set the gridfs.operation header to override the route's intended operation - switching, for example, a file upload to remove (deleting a file identified by the attacker-supplied gridfs.objectid), listAll (enumerating every file in the bucket) or findOne (reading a file) - and supply a gridfs.metadata value that is parsed as a MongoDB document, enabling NoSQL operator injection. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive GridFS operations or metadata via the raw header names must use CamelGridFsOperation / CamelGridFsObjectId / CamelGridFsMetadata / CamelGridFsChunkSize / CamelGridFsFileId instead of the gridfs. names. For deployments that cannot upgrade immediately, set an explicit operation on the mongodb-gridfs: endpoint so the operation is not taken from a header, and strip the gridfs. headers from any untrusted ingress before the producer.

Improper Input Validation vulnerability in Apache Camel AWS SNS component.

The camel-aws2-sns component filters Camel headers through a component-specific HeaderFilterStrategy, Sns2HeaderFilterStrategy. Like the sibling Sqs2HeaderFilterStrategy, it originally configured only an outbound filter (setOutFilterPattern, which blocks Camel, breadcrumbId and org.apache.camel. headers from being written out) and did not configure an inbound filter rule. For the related camel-aws2-sqs component this inbound gap was exploitable, because the Sqs2Consumer maps inbound SQS message attributes into the Camel Exchange via HeaderFilterStrategy.applyFilterToExternalHeaders, allowing a message sender to inject Camel control headers (tracked as CVE-2026-46456). camel-aws2-sns, by contrast, is producer-only: Sns2Endpoint does not support consumers (createConsumer throws UnsupportedOperationException, 'You cannot receive messages from this endpoint'), so no externally-supplied message attributes are ever mapped inbound into a Camel Exchange through SNS, and the missing inbound filter rule on Sns2HeaderFilterStrategy was therefore not reachable by an attacker. As part of the same fix (CAMEL-23506), an inbound filter rule (setInFilterStartsWith for the Camel namespace) was added to Sns2HeaderFilterStrategy so that its configuration matches the corrected Sqs2HeaderFilterStrategy and the other sibling strategies. This is a defense-in-depth alignment with no known exploit path in camel-aws2-sns.

This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

This is a defense-in-depth hardening change with no known exploit path in camel-aws2-sns, which is producer-only, so no urgent action or workaround is required. Users who want the aligned behaviour can upgrade to version 4.21.0, or to 4.14.8 on the 4.14.x LTS releases stream, or to 4.18.3 on the 4.18.x releases stream, which contain the change. As a general best practice, operators should continue to apply least-privilege IAM permissions on their SNS topics.

Improper Input Validation vulnerability in Apache Camel Cometd Component.

The camel-cometd component maps inbound Bayeux (CometD) message headers into the Camel Exchange without applying a HeaderFilterStrategy. CometdBinding.populateExchangeFromMessage copies the entire ext.CamelHeaders map supplied by the CometD client directly onto the Camel message (message.setHeaders), so any header name - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelJmsDestinationName - is accepted unmodified. Because a CometdComponent installs no Bayeux SecurityPolicy by default, any client that can complete the Bayeux handshake against the CometD endpoint can publish such a message without authentication. An attacker can therefore inject arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a JMS destination); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix implements a HeaderFilterStrategy in the camel-cometd binding (a long-standing TODO in the code) that filters the Camel header namespace case-insensitively on inbound mapping, so client-supplied Camel / camel headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound CometD messages before they reach any downstream producer (for example removeHeaders('Camel') and removeHeaders('camel') at the start of the route), and install an explicit Bayeux SecurityPolicy on the CometdComponent so that only authenticated clients can publish.

Improper Input Validation vulnerability in Apache Camel AWS2-SQS Component.

The camel-aws2-sqs component map inbound message attributes into the Camel Exchange through a component-specific HeaderFilterStrategy. Sqs2HeaderFilterStrategy configured only an outbound filter (setOutFilterPattern, which blocks Camel, breadcrumbId and org.apache.camel. headers being written to the broker) but did not configure an inbound filter. As a result, when Sqs2Consumer copies each SQS MessageAttribute into the Exchange via HeaderFilterStrategy.applyFilterToExternalHeaders, DefaultHeaderFilterStrategy applied no inbound rule and treated every header name as not filtered - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelSqlQuery - copying them unmodified onto the Camel message. Any principal able to send messages to the consumed SQS queue (for example a cross-account sender or a lower-privileged in-account component holding sqs:SendMessage) could therefore set arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a query); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses.

This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix adds an inbound HeaderFilterStrategy rule to Sqs2HeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so sender-supplied Camel / camel headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound messages before they reach any downstream producer (for example removeHeaders('Camel') and removeHeaders('camel') at the start of the route), and restrict who may send to the consumed SQS queue by applying least-privilege sqs:SendMessage permissions on the queue resource policy.

Improper input validation vulnerability in Apache Camel Atmosphere Websocket component.

This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0.

The camel-atmosphere-websocket producer selects which connected WebSocket peers a message is delivered to through Exchange headers, and the string values of those headers sat outside the Camel namespace: websocket.connectionKey and websocket.connectionKey.list, along with websocket.sendToAll, websocket.eventType and websocket.errorType. WebsocketEndpoint extends ServletEndpoint and so inherits HttpHeaderFilterStrategy, which filters only the Camel and camel prefixes; the dotted names therefore fell outside the filtered namespace and were admitted in both directions by every HTTP-family consumer. In a route bridging an HTTP consumer into an atmosphere-websocket producer, an external sender could supply the list header and take over the producer's dispatch decision. WebsocketProducer.process tests the list header before the single-key header, so an injected value discarded the recipient the route had selected: a notification intended for one connected client could be suppressed, or delivered instead to a different client whose connection key the sender knows. The header need not be a query parameter and need not be supplied as a list literally - Camel's HTTP binding promotes a repeated header name, and a bracketed value, to a List when mapping onto the Exchange - so an ordinary inbound HTTP header is sufficient to reach the list-valued branch. This is distinct from CVE-2026-55993, which concerns the consumer-side query-parameter path in the same component. The behaviour dates back to the introduction of these constants, first released in 2.17.0, and was unchanged until this fix.

Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, strip the dispatch headers at the trust boundary before the producer, for example with removeHeaders(“websocket.”) placed between the HTTP consumer and the atmosphere-websocket producer. Note that the fix renames the header string values into the Camel namespace, which is a breaking change for routes that set them by literal string: routes referencing the WebsocketConstants fields symbolically are unaffected, and the change is documented in the upgrade guides. As defence in depth, do not bridge an untrusted HTTP consumer directly into a WebSocket producer whose dispatch is header-driven without stripping the dispatch namespace first.

Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel DNS component.

The camel-dns producers read DNS operation parameters - the resolver to query, the name or domain to look up, the record type and class, and the search term - from Exchange message headers whose constant values (DnsConstants.DNSSERVER, DNSNAME, DNSDOMAIN, DNSTYPE, DNSCLASS, TERM) were the plain strings dns.server, dns.name, dns.domain, dns.type, dns.class and term. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a dns: producer, any HTTP client could therefore set the dns.server header to make the dig producer build a SimpleResolver pointing at an attacker-controlled DNS server - a server-side request forgery via DNS, through which the attacker observes the queried name and can return poisoned responses - and set the dns.name / dns.domain headers to resolve arbitrary internal hostnames, disclosing whether they exist (internal network reconnaissance). No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive DNS operations via the raw header names must use CamelDnsServer / CamelDnsName / CamelDnsDomain / CamelDnsType / CamelDnsClass / CamelDnsTerm instead of the dns. / term names. For deployments that cannot upgrade immediately, strip the dns. and term headers from any untrusted ingress before the dns: producer, and set the DNS server and lookup parameters from a trusted source in the route.

Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection'), Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel Solr component.

The camel-solr producer copies Exchange message headers whose names begin with the SolrParam. prefix into the parameters of the Solr request, and headers whose names begin with the SolrField. prefix into the fields of the indexed Solr document. The prefix constants (SolrConstants.HEADERPARAMPREFIX / HEADERFIELDPREFIX) were the plain strings SolrParam. / SolrField.. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a solr: producer, any HTTP client could therefore set SolrParam. headers to inject arbitrary Solr request parameters - including shards or stream.url, which cause the Solr server to issue server-side requests to an attacker-chosen URL (server-side request forgery, for example to an internal service or a cloud metadata endpoint), or qt to reach administrative request handlers - and set SolrField. headers to inject arbitrary fields into indexed documents. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Solr parameters or fields via the raw header prefixes must use CamelSolrParam. / CamelSolrField. instead of SolrParam. / SolrField.. For deployments that cannot upgrade immediately, strip the SolrParam. and SolrField. headers from any untrusted ingress before the solr: producer, and set the required Solr parameters and fields from a trusted source in the route.

Relative path traversal vulnerability in Apache Camel Azure Storage Blob component.

This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0.

The camel-azure-storage-blob component can download an Azure Storage blob to the local filesystem through its downloadBlobToFile operation, writing into the directory named by the fileDir endpoint option, which is documented as usable from both the producer and the consumer. BlobOperations.downloadBlobToFile built the local target by joining fileDir with the remote blob name exactly as the Azure SDK reported it (new File(fileDir, client.getBlobName())) and passed the result straight to the SDK download call, with no lexical normalization and no check that the resolved location stayed inside fileDir. The blob name is not route-controlled data: the consumer enumerates the container in BlobConsumer.createBatchExchangesFromContainer, which lists blobs and creates one exchange per entry from BlobItem.getName() verbatim, applying no name filtering by default. A blob name containing parent-directory segments therefore resolved to a location outside the configured fileDir, letting anyone able to influence the names present in the consumed container cause Camel to create or overwrite a file at a location of their choosing, with the privileges of the Camel process. Depending on what the process can write to, overwriting a file outside the download directory can escalate beyond the loss of integrity of that file. Azure Storage blob containers use a flat namespace in which the blob name is an opaque key, so a name carrying such segments is stored and listed as given. The fileDir option is an ordinary common-group configuration parameter and carries no security marker, so nothing signalled to users that its value was not being enforced as a containment boundary. Camel's other file-download consumers - camel-file, camel-ftp, camel-smb, camel-mina-sftp and camel-azure-files - already constrained their local downloads to the configured directory using a path-segment boundary check; the camel-azure-storage-blob download path was not covered by that work.

Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, constrain the names the consumer will act on using the regex endpoint option, which is applied to each listed blob name as a full-string match, so that only simple single-segment names are accepted and any name carrying a path separator or a parent-directory segment is filtered out before an exchange is created; the prefix option can additionally narrow the listing server-side, noting that when both are set regex takes priority and prefix is ignored. Alternatively, avoid the downloadBlobToFile operation on untrusted containers and write the payload from the route under a file name the route itself controls, rather than one taken from the remote listing. As defence in depth, treat the blob names in any externally writable container as untrusted input and do not derive local filesystem paths from them.

Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel FTP component.

This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.

The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the ftp, ftps and sftp schemes, all of which are affected. The reporter demonstrated the issue end to end against an ftp endpoint, driving a Camel route with a malicious server whose LIST response named a file outside the polled directory.

Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream.

Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Azure Files component.

This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.

The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the azure-files scheme. Its consumer derives from the same RemoteFileConsumer base class and composed the remote path through a plain concatenation helper, so it inherited the same unconstrained resolution. Reaching it requires a listing name that is not a single path segment, which the Azure Files REST service does not normally return; the exposure was corrected on the same basis as the other remote-file consumers rather than from a demonstrated proof of concept against this scheme.

Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream.

The camel-infinispan component's ProtoStream-based remote aggregation repository deserializes data read from a remote Infinispan cache using java.io.ObjectInputStream without applying any ObjectInputFilter. An attacker who can write to the Infinispan cache used by a Camel application can inject a crafted serialized Java object that, when read during normal aggregation repository operations such as get or recover, results in arbitrary code execution in the context of the application.

This issue affects Apache Camel: from 4.0.0 before 4.14.7, from 4.15.0 before 4.18.2, from 4.19.0 before 4.20.0.

Users are recommended to upgrade to version 4.20.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.7. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.2.

The JIRA ticket: https://issues.apache.org/jira/browse/CAMEL-23322 refers to the various commits that resolved the issue, and have more details. This issue follows the same class of vulnerability previously addressed in CVE-2024-22369, CVE-2024-23114 and CVE-2026-25747.

Deserialization of Untrusted Data vulnerability in Apache Camel Camel-Jgroups component.

This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.

JGroupsEndpoint.createExchange(Message), which CamelJGroupsReceiver calls for every message the jgroups consumer receives before the exchange is routed, set the exchange body from org.jgroups.Message.getObject(). For an ObjectMessage, which is the message type the Camel jgroups producer sends, JGroups Java-deserializes the payload through an ObjectInputStream on its own receive thread as the message arrives, and getObject() returns the resulting object. No java.io.ObjectInputFilter was applied on that path unless the deployment had set a JVM-wide serialization filter: camel-jgroups installed none, and the JGroups versions shipped with the affected releases apply none of their own, so any serializable class on the application classpath could be instantiated and its deserialization callbacks run. Unless a channel or the channelProperties option is configured, the consumer creates its channel with new JChannel(), the stock JGroups protocol stack, which multicasts over UDP without the AUTH protocol and without encryption, so any host able to reach the cluster's multicast group or bind port can join the cluster and send messages to the consumer without credentials. Such a host could send a crafted serialized object that leads to remote code execution in the Camel process when a usable deserialization gadget chain is present on the classpath, and no non-default option was required on the consumer. Because JGroups materializes the object before Camel's receiver runs, a check performed by Camel can only inspect the deserialized result and cannot stop code that runs during deserialization, so closing the issue also requires a control that applies before the payload is read, as described in the mitigation. Exploitation requires network access to the cluster's multicast group or bind port, which with the default UDP multicast transport means a host on an adjacent network, and a usable gadget chain on the classpath, which is why the severity is assessed as high rather than critical.

Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.1. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier, and the 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines, reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release.

Server-Side Request Forgery (SSRF) vulnerability in Apache Camel AS2 component.

This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.

In the AS2 protocol the sender of a message may request that the Message Disposition Notification be returned asynchronously to an address the sender supplies. camel-as2 took that address from the inbound message and used it as the destination for the outgoing receipt without constraining it to anything the deployment had configured. A remote partner therefore chose the host the Camel instance would connect to when delivering the MDN. That gives server-side request forgery from the position of the AS2 receiver, including reaching hosts that are only routable from inside the deployment's network, and where the outbound connection carries credentials configured for MDN delivery those credentials are presented to the attacker-chosen destination.

Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The asynchronous MDN destination is now constrained rather than taken verbatim from the inbound message. For deployments that cannot upgrade immediately, restrict outbound connectivity from the AS2 receiver to the partner endpoints it legitimately delivers receipts to, and do not attach credentials to MDN delivery that are valid for any host other than those partners.

Improper Handling of Case Sensitivity vulnerability in Apache Camel Netty HTTP component.

This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.

The camel-netty-http security constraint compared the request path against the configured context path using a case-sensitive match, while the routing that dispatches the request to the endpoint did not apply the same rule. The two comparisons therefore disagreed for any path whose case differed from the configured value. An external caller could alter the case of a character in a path segment so that the security constraint no longer recognised the path as protected, while the request still dispatched to the same endpoint. The result is that the constraint is skipped and the protected route is reached without satisfying it. No credential, prior access or special configuration is required beyond being able to send a request to the consumer.

Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The constraint now matches the request path with the same case rules the dispatch uses, so the two can no longer disagree. For deployments that cannot upgrade immediately, place the authorization decision in front of the Camel consumer, for example in a reverse proxy that normalises the request path before forwarding.

Deserialization of Untrusted Data vulnerability in Apache Camel Hazelcast component.

The camel-hazelcast component creates and manages Hazelcast instances using a default configuration that applies no Java deserialization filter. When Camel builds the Hazelcast Config itself - that is, when no user-supplied HazelcastInstance, hazelcastConfigUri, or referenced Config bean is provided - neither Hazelcast's JavaSerializationFilterConfig nor a Camel-side ObjectInputFilter is configured, so objects received over the Hazelcast cluster protocol are deserialized inside Hazelcast's own serialization layer (ObjectInputStream.readObject) before Camel ever processes them. An attacker who can join or otherwise reach the Hazelcast cluster can publish a crafted serialized Java object that is then deserialized on every Camel node, resulting in remote code execution. The exposure is present by default and requires no opt-in endpoint configuration: any route using a hazelcast consumer (hazelcast-topic, hazelcast-queue, hazelcast-seda, hazelcast-map, hazelcast-multimap, hazelcast-replicatedmap, hazelcast-list, hazelcast-set), as well as the HazelcastAggregationRepository and HazelcastIdempotentRepository, is affected whenever the managed instance is created from Camel's default configuration. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes Camel apply a default Hazelcast JavaSerializationFilterConfig (whitelisting the java., javax. and org.apache.camel. class-name prefixes and blacklisting java.net.) to instances it creates from its own default configuration, while leaving any user-supplied Config or HazelcastInstance untouched. For deployments that cannot upgrade immediately, configure a deserialization filter on the Hazelcast instance (Hazelcast JavaSerializationFilterConfig, or the JVM-wide system property -Djdk.serialFilter=!java.net.;java.;javax.;org.apache.camel.;!) and enable Hazelcast cluster authentication and TLS to restrict who can reach the cluster.

Deserialization of Untrusted Data vulnerability in Apache Camel.

The camel-vertx-http component deserializes HTTP response bodies carrying the Content-Type application/x-java-serialized-object using a raw java.io.ObjectInputStream, without applying any ObjectInputFilter (VertxHttpHelper.deserializeJavaObjectFromStream) This deserialization path is reached only when the producer endpoint is configured with transferException=true (or the component-level allowJavaSerializedObject=true) and throwExceptionOnFailure is left at its default value of true; in that case a backend HTTP response with a 5xx status and the application/x-java-serialized-object content type has its body deserialized with no class restrictions. An attacker who controls the backend the Camel producer talks to - through a man-in-the-middle position on an unencrypted (plain HTTP) connection, or by compromising the backend service - can return a crafted serialized Java object and, if a suitable gadget chain is present on the classpath, achieve remote code execution on the Camel application host. The path is not reachable in the default configuration, where transferException is false. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.20.0.

Users are recommended to upgrade to version 4.20.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the deserialization performed by both helper utilities is constrained by a default ObjectInputFilter (allow-list java.;javax.;org.apache.camel.;!), which can be customised through the new deserializationFilter endpoint option or the JVM-wide -Djdk.serialFilter system property. For deployments that cannot upgrade immediately: do not enable transferException=true (or allowJavaSerializedObject=true) on producers that talk to untrusted or network-reachable backends; ensure producer connections use TLS (https) so that a response cannot be substituted by a man-in-the-middle; and, where the option is required, set an explicit -Djdk.serialFilter allow-list (for example java.;org.apache.camel.;!) to constrain deserialization.

Deserialization of Untrusted Data vulnerability in Apache Camel SQL Component. This issue affects Apache Camel: from 3.0.0 before 3.21.4, from 3.22.0 before 3.22.1, from 4.0.0 before 4.0.4, from 4.1.0 before 4.4.0.

Users are recommended to upgrade to version 4.4.0, which fixes the issue. If users are on the 4.0.x LTS releases stream, then they are suggested to upgrade to 4.0.4. If users are on 3.x, they are suggested to move to 3.21.4 or 3.22.1

Exposure of sensitive data by by crafting a malicious EventFactory and providing a custom ExchangeCreatedEvent that exposes sensitive data. Vulnerability in Apache Camel. This issue affects Apache Camel: from 3.0.0 through 3.21.3, from 3.22.X through 3.22.0, from 4.0.X through 4.0.3, from 4.X through 4.3.0.

Users are recommended to upgrade to version 3.21.4, 3.22.1, 4.0.4 or 4.4.0, which fixes the issue.

Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel in Vertx Websocket component.

The camel-vertx-websocket consumer mapped inbound WebSocket query and path parameters into the Camel Exchange header map without applying any HeaderFilterStrategy (VertxWebsocketConsumer.populateExchangeHeaders()). Because nothing blocked the Camel header namespace, a client connecting to the WebSocket endpoint could set Camel-internal control headers - including CamelHttpUri (Exchange.HTTPURI) - simply by supplying them as query parameters. In a route where the WebSocket consumer feeds a downstream HTTP producer, the injected CamelHttpUri redirects the server-side HTTP request to an attacker-chosen destination (server-side request forgery - for example to an internal service or a cloud metadata endpoint). In addition, the HTTP producer resolves Camel property placeholders on the resulting (attacker-controlled) URI, so placeholders embedded in the injected value - such as an environment-variable reference, an application property, or a vault reference - are resolved to their real values and sent to the attacker, disclosing environment variables, application properties and vault secrets. When the WebSocket endpoint is exposed without authentication, this is reachable by an unauthenticated remote attacker. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes the affected consumers apply a HeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so externally-supplied Camel / camel headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from the inbound message before they reach any downstream producer (for example removeHeaders('Camel') and removeHeaders('camel') at the start of the route), require authentication on the WebSocket endpoint, and avoid bridging an untrusted consumer directly into an HTTP producer whose target URI can be driven from message headers.

Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel in Atmosphere Websocket Component.

The camel-atmosphere-websocket consumer mapped inbound WebSocket query parameters into the Camel Exchange header map without applying any HeaderFilterStrategy (WebsocketConsumer.sendEventNotification() iterates the query-string map collected in WebsocketConsumer.service() and copies each entry into the Exchange). Because nothing blocked the Camel header namespace, a client connecting to the WebSocket endpoint could set Camel-internal control headers - including CamelHttpUri (Exchange.HTTPURI) - simply by supplying them as query parameters. In a route where the WebSocket consumer feeds a downstream HTTP producer, the injected CamelHttpUri redirects the server-side HTTP request to an attacker-chosen destination (server-side request forgery - for example to an internal service or a cloud metadata endpoint). In addition, the HTTP producer resolves Camel property placeholders on the resulting (attacker-controlled) URI, so placeholders embedded in the injected value - such as an environment-variable reference, an application property, or a vault reference - are resolved to their real values and sent to the attacker, disclosing environment variables, application properties and vault secrets. When the WebSocket endpoint is exposed without authentication, this is reachable by an unauthenticated remote attacker. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes the consumer apply the HeaderFilterStrategy it already inherits from the HTTP/servlet stack, filtering the Camel header namespace case-insensitively on inbound mapping, so externally-supplied Camel / camel headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from the inbound message before they reach any downstream producer (for example removeHeaders('Camel') and removeHeaders('camel') at the start of the route), require authentication on the WebSocket endpoint, and avoid bridging an untrusted consumer directly into an HTTP producer whose target URI can be driven from message headers.

Improper Input Validation vulnerability in Apache Camel NATS component.

The camel-nats component maps inbound NATS message headers into the Camel Exchange but defaulted its headerFilterStrategy to a bare new DefaultHeaderFilterStrategy() with no inbound rules configured (NatsConfiguration). With no inFilter, inFilterPattern or inFilterStartsWith set, DefaultHeaderFilterStrategy.applyFilterToExternalHeaders returns not filtered for every header name, so NatsConsumer copies every NATS message header - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelSqlQuery - unmodified onto the Camel message. A client able to publish to the consumed NATS subject can therefore inject arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a query); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses. NATS message headers require NATS 2.2 or later, and the issue is reachable without credentials when the NATS server is configured without authentication (the NATS server default). This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes camel-nats default to a dedicated NatsHeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so client-supplied Camel / camel headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound NATS messages before they reach any downstream producer (for example removeHeaders('Camel') and removeHeaders('camel') at the start of the route), and enable authentication on the NATS server so that only trusted clients can publish to the consumed subject.

Improper Input Validation, Unintended Proxy or Intermediary ('Confused Deputy') vulnerability in Apache Camel CXF SOAP component.

The camel-cxf producer selects which SOAP operation to invoke on the backend service from the operationName (and operationNamespace) Exchange header, whose constant values (CxfConstants.OPERATIONNAME / OPERATIONNAMESPACE) were the plain strings operationName / operationNamespace. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a cxf: producer, any HTTP client could therefore set the operationName header and have CxfProducer resolve and invoke a different WSDL operation than the route intended - for example replacing a read operation with a destructive one - against the backend SOAP service (a confused-deputy redirection). The constant is defined in the shared camel-cxf-common module, so the same non-prefixed names also applied to camel-cxfrs. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the operation-selection headers are named CamelCxfOperationName / CamelCxfOperationNamespace and are filtered at transport boundaries; see the 4.21 upgrade guide for the cross-transport carrier-header pattern. For deployments that cannot upgrade immediately, do not select the CXF operation from untrusted input: strip the operationName and operationNamespace headers from any untrusted ingress before the cxf: producer and set the operation from a trusted source in the route.

Improper Input Validation, Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel Lucene Component.

The camel-lucene producer reads the search phrase from an Exchange header (LuceneConstants.HEADERQUERY) whose value was the plain string QUERY (and RETURNLUCENEDOCS for HEADERRETURNLUCENEDOCS). Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that exposes a Lucene query operation behind an HTTP consumer (for example platform-http), any HTTP client could therefore set the QUERY header and have its value executed against the full-text index, overriding the query the route intended to run. Depending on what is indexed, this allows reading documents the request should not have access to (for example a match-all query returns the entire index, or the route's intended per-user filter can be replaced), and expensive regular-expression queries can consume significant CPU. No credentials are required when the HTTP consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set the query via the raw header name must use CamelLuceneQuery (and CamelLuceneReturnLuceneDocs) instead of QUERY / RETURNLUCENEDOCS. For deployments that cannot upgrade immediately, strip the attacker-controllable headers before the Lucene producer and set the query from a trusted source (for example removeHeader('QUERY') and removeHeader('RETURNLUCENEDOCS'), then setHeader('QUERY', constant(...)) at the start of the route).

Relative path traversal vulnerability in Apache Camel Google Storage component.

This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0.

The camel-google-storage consumer downloads Google Cloud Storage objects to the local filesystem when the downloadFileName option is set. That option is documented as a folder or a filename, and when its value contains no expression token the consumer builds the local destination by appending the object name to it: evaluateFileExpression sets the Exchange file-name header to the remote object name and evaluates downloadFileName + "/${file:name}". The ${file:name} token returns the file-name header verbatim, unlike ${file:onlyname}, which applies FileUtil.stripPath to it. The resulting string was passed directly to new File(result) and blob.downloadTo(file.toPath()) with no lexical normalization and no check that the destination stayed inside the configured directory. The object name is not route-controlled data: the consumer lists the bucket, iterates every returned blob and creates one exchange per object from blob.getBlobId().getName() verbatim, and the filter option that could restrict those names is not applied at all unless it has been explicitly set. Google Cloud Storage object names are opaque UTF-8 keys that the service stores and lists exactly as written, with no server-side canonicalization, and a forward slash is only a display convention for pseudo-directories, so a key containing parent-directory segments survives round-tripping intact. An object name containing such segments therefore resolved to a location outside the configured downloadFileName directory, letting anyone able to influence the names present in the consumed bucket cause Camel to create or overwrite a file at a location of their choosing, with the privileges of the Camel process. Depending on what the process can write to, overwriting a file outside the download directory can escalate beyond the loss of integrity of that file. The downloadFileName option is an ordinary consumer parameter and carries no security marker, so nothing signalled to users that its value was not being enforced as a containment boundary. The defect is consumer-only; the producer has no download-to-file sink. Camel's other file-download consumers - camel-file, camel-ftp, camel-smb, camel-mina-sftp, camel-azure-files and the Azure Storage download paths - already constrained their local downloads to the configured directory using a path-segment boundary check; camel-google-storage was the remaining object-store download sink not covered by that work.

Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, set the filter option to a regular expression that accepts only simple single-segment object names, so that any name carrying a path separator or a parent-directory segment is excluded before an exchange is created; note that no filtering whatsoever is applied when the option is left unset, and that the expression is matched against the whole object name. Alternatively, give downloadFileName an explicit expression that does not carry the remote path through, for example one built on ${file:onlyname} rather than the implicit ${file:name}, keeping in mind that a downloadFileName containing an expression is treated as route-author-controlled and is not covered by the containment check added in the fix. As defence in depth, treat the object names in any externally writable bucket as untrusted input and do not derive local filesystem paths from them.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Camel HTTP component.

This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.

Two paths handed credentials to a redirect target, which is a host chosen by the remote server rather than by the route, once followRedirects=true. OAuth2ClientConfigurer registers its interceptor with addRequestInterceptorFirst, and HttpClient runs protocol-level request interceptors inside ProtocolExec, which sits below RedirectExec in the exec chain; the interceptor therefore ran again for every redirect hop and re-attached Authorization: Bearer to whatever host the Location header named. Separately, credentials were registered against an AuthScope matching any host, so basic and digest credentials were presented to a redirect target as well. A remote endpoint - or anyone who can influence its responses - could therefore collect the bearer token or the configured credentials simply by answering with a redirect to a host it controls.

Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Credentials are now sent only to the authority the endpoint was configured with, and are not re-attached when a redirect crosses to another host. For deployments that cannot upgrade immediately, set followRedirects=false on endpoints that carry credentials, and handle any redirect explicitly in the route so that the destination is chosen by the route rather than by the remote server.

Improper Restriction of XML External Entity Reference vulnerability in Apache Camel XPath component.

This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.

With documentType set to InputSource, XPathBuilder handed the payload straight to javax.xml.xpath, which builds a DocumentBuilder of its own using the JDK defaults. The hardening applied to Camel's default document type was therefore bypassed: a DOCTYPE declaration that is refused on the default type was accepted here, and the external entity it declared was resolved and expanded into the evaluated document. An external sender whose XML reaches such an expression could read files readable by the Camel process and cause the process to issue requests to hosts it names. The two document types disagreeing on parser configuration is what made this reachable, since a deployment choosing InputSource for streaming reasons had no indication it was also choosing a weaker parser.

Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The InputSource document type now goes through the same hardened parser as the default type, so a DOCTYPE is refused. Note that it also shares that type's documented escape hatch: the same DocumentBuilderFactory system properties that relax the default type relax this one, so a deployment that has set them remains unprotected by design. For deployments that cannot upgrade immediately, do not use documentType=InputSource on expressions evaluated over untrusted XML; the default document type already refuses a DOCTYPE.

Improper Input Validation vulnerability in Apache Camel.

This issue affects Apache Camel: through 4.14.7, from 4.15.0 through 4.18.2, from 4.19.0 through 4.20.0.

Users are recommended to upgrade to version 4.14.8, 4.18.3, 4.21.0, which fixes the issue.

Improper Input Validation vulnerability in Apache Camel.

This issue affects Apache Camel: through 4.14.7, from 4.15.0 through 4.18.2, from 4.19.0 through 4.20.0.

Users are recommended to upgrade to version 4.14.8, 4.18.3, 4.21.0, which fixes the issue.