Cisco Gigabit Switch routers running IOS allow remote attackers to forward unauthorized packets due to improper handling of the "established" keyword in an access list.

Cisco IOS 12.2 through 12.4 before 20060920, as used by Cisco IAD2430, IAD2431, and IAD2432 Integrated Access Devices, the VG224 Analog Phone Gateway, and the MWR 1900 and 1941 Mobile Wireless Edge Routers, is incorrectly identified as supporting DOCSIS, which allows remote attackers to gain read-write access via a hard-coded cable-docsis community string and read or modify arbitrary SNMP variables.

Multiple SSH2 servers and clients do not properly handle packets or data elements with incorrect length specifiers, which may allow remote attackers to cause a denial of service or possibly execute arbitrary code, as demonstrated by the SSHredder SSH protocol test suite.

Multiple SSH2 servers and clients do not properly handle large packets or large fields, which may allow remote attackers to cause a denial of service or possibly execute arbitrary code via buffer overflow attacks, as demonstrated by the SSHredder SSH protocol test suite.

Multiple SSH2 servers and clients do not properly handle strings with null characters in them when the string length is specified by a length field, which could allow remote attackers to cause a denial of service or possibly execute arbitrary code due to interactions with the use of null-terminated strings as implemented using languages such as C, as demonstrated by the SSHredder SSH protocol test suite.

Multiple SSH2 servers and clients do not properly handle lists with empty elements or strings, which may allow remote attackers to cause a denial of service or possibly execute arbitrary code, as demonstrated by the SSHredder SSH protocol test suite.

The PKI functionality in Cisco IOS 15.0 and 15.1 does not prevent permanent caching of certain public keys, which allows remote attackers to bypass authentication and have unspecified other impact by leveraging an IKE peer relationship in which a key was previously valid but later revoked, aka Bug ID CSCth82164, a different vulnerability than CVE-2010-4685.

Unspecified vulnerability in the Smart Install functionality in Cisco IOS 12.2 and 15.1 allows remote attackers to execute arbitrary code or cause a denial of service (device crash) via crafted TCP packets to port 4786, aka Bug ID CSCto10165.

Unspecified vulnerability in the SIP implementation in Cisco IOS 12.3 and 12.4 allows remote attackers to execute arbitrary code via a malformed SIP message, aka Bug ID CSCsz48680, the "SIP Message Processing Arbitrary Code Execution Vulnerability."

Unspecified vulnerability in the SIP implementation in Cisco IOS 12.3 and 12.4 allows remote attackers to execute arbitrary code via a malformed SIP message, aka Bug ID CSCsz89904, the "SIP Packet Parsing Arbitrary Code Execution Vulnerability."

CERT has told us of an authentication bypass flaw in Net-SNMP and UCD-SNMP.

According to net-snmp:

"The quick technical summary is that the SNMPv3 packet contains a truncated HMAC authentication code. The author that wrote the code very very long ago to check that HMAC code used the length of the packet's version of the HMAC code to do the check. Thus if you send a single byte HMAC code, it'll only check it against the first byte of HMAC output. Thus it's fairly easy to spoof an authenticated SNMPv3 packet."

Multiple vulnerabilities in Cisco IOS Software for Cisco 809 and 829 Industrial Integrated Services Routers (Industrial ISRs) and Cisco 1000 Series Connected Grid Routers (CGR1000) could allow an unauthenticated, remote attacker or an authenticated, local attacker to execute arbitrary code on an affected system or cause an affected system to crash and reload. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco IOS Software for Cisco 809 and 829 Industrial Integrated Services Routers (Industrial ISRs) and Cisco 1000 Series Connected Grid Routers (CGR1000) could allow an unauthenticated, remote attacker or an authenticated, local attacker to execute arbitrary code on an affected system or cause an affected system to crash and reload. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Smart Install feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition, or to execute arbitrary code on an affected device. The vulnerability is due to improper validation of packet data. An attacker could exploit this vulnerability by sending a crafted Smart Install message to an affected device on TCP port 4786. A successful exploit could allow the attacker to cause a buffer overflow on the affected device, which could have the following impacts: Triggering a reload of the device, Allowing the attacker to execute arbitrary code on the device, Causing an indefinite loop on the affected device that triggers a watchdog crash. Cisco Bug IDs: CSCvg76186.

The DHCP relay subsystem of Cisco IOS 12.2 through 15.6 and Cisco IOS XE Software contains a vulnerability that could allow an unauthenticated, remote attacker to execute arbitrary code and gain full control of an affected system. The attacker could also cause an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to a buffer overflow condition in the DHCP relay subsystem of the affected software. An attacker could exploit this vulnerability by sending a crafted DHCP Version 4 (DHCPv4) packet to an affected system. A successful exploit could allow the attacker to execute arbitrary code and gain full control of the affected system or cause the affected system to reload, resulting in a DoS condition. Cisco Bug IDs: CSCsm45390, CSCuw77959.

A vulnerability in the Cisco Cluster Management Protocol (CMP) processing code in Cisco IOS and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a reload of an affected device or remotely execute code with elevated privileges. The Cluster Management Protocol utilizes Telnet internally as a signaling and command protocol between cluster members. The vulnerability is due to the combination of two factors: (1) the failure to restrict the use of CMP-specific Telnet options only to internal, local communications between cluster members and instead accept and process such options over any Telnet connection to an affected device; and (2) the incorrect processing of malformed CMP-specific Telnet options. An attacker could exploit this vulnerability by sending malformed CMP-specific Telnet options while establishing a Telnet session with an affected Cisco device configured to accept Telnet connections. An exploit could allow an attacker to execute arbitrary code and obtain full control of the device or cause a reload of the affected device. This affects Catalyst switches, Embedded Service 2020 switches, Enhanced Layer 2 EtherSwitch Service Module, Enhanced Layer 2/3 EtherSwitch Service Module, Gigabit Ethernet Switch Module (CGESM) for HP, IE Industrial Ethernet switches, ME 4924-10GE switch, RF Gateway 10, and SM-X Layer 2/3 EtherSwitch Service Module. Cisco Bug IDs: CSCvd48893.

This advisory is part of the March 28, 2018, release of the Cisco IOS and IOS XE Software Security Advisory Bundled Publication, which includes 20 Cisco Security Advisories that describe 22 vulnerabilities. For a complete list of the advisories and links to them, see Cisco Event Response: March 2018 Semiannual Cisco IOS and IOS XE Software Security Advisory Bundled Publication.

This advisory is part of the March 28, 2018, release of the Cisco IOS and IOS XE Software Security Advisory Bundled Publication, which includes 20 Cisco Security Advisories that describe 22 vulnerabilities. For a complete list of the advisories and links to them, see Cisco Event Response: March 2018 Semiannual Cisco IOS and IOS XE Software Security Advisory Bundled Publication.

HTTP server for Cisco IOS 11.3 to 12.2 allows attackers to bypass authentication and execute arbitrary commands, when local authorization is being used, by specifying a high access level in the URL.

Cisco IOS 12.0 through 12.2, when IP routing is disabled, accepts false ICMP redirect messages, which allows remote attackers to cause a denial of service (network routing modification).

Cisco IOS 12.0 to 12.4 might allow remote attackers to execute arbitrary code via a heap-based buffer overflow in system timers. NOTE: this issue does not correspond to a specific vulnerability, rather a general weakness that only increases the feasibility of exploitation of any vulnerabilities that might exist. Such design-level weaknesses normally are not included in CVE, so perhaps this issue should be REJECTed.

The web interface on Cisco IOS 12.3(8)JA and 12.3(8)JA1, as used on the Cisco Wireless Access Point and Wireless Bridge, reconfigures itself when it is changed to use the "Local User List Only (Individual Passwords)" setting, which removes all security and password configurations and allows remote attackers to access the system.

Multiple memory leaks in Cisco IOS 12.0 through 12.4 allow remote attackers to cause a denial of service (device crash) via a malformed SIP packet, aka (1) CSCsf11855, (2) CSCeb21064, (3) CSCse40276, (4) CSCse68355, (5) CSCsf30058, (6) CSCsb24007, and (7) CSCsc60249.

Buffer overflow in the Next Hop Resolution Protocol (NHRP) functionality in Cisco IOS 12.0 through 12.4 allows remote attackers to cause a denial of service (restart) and execute arbitrary code via a crafted NHRP packet.

The FTP Server in Cisco IOS 11.3 through 12.4 does not properly check user authorization, which allows remote attackers to execute arbitrary code, and have other impact including reading startup-config, as demonstrated by a crafted MKD command that involves access to a VTY device and overflows a buffer, aka bug ID CSCek55259.

The SSHv2 functionality in Cisco IOS 15.2, 15.3, 15.4, and 15.5 and IOS XE 3.6E before 3.6.3E, 3.7E before 3.7.1E, 3.10S before 3.10.6S, 3.11S before 3.11.4S, 3.12S before 3.12.3S, 3.13S before 3.13.3S, and 3.14S before 3.14.1S does not properly implement RSA authentication, which allows remote attackers to obtain login access by leveraging knowledge of a username and the associated public key, aka Bug ID CSCus73013.

Cisco IOS 12.0, 15.0, and 15.1, when a Policy Feature Card 3C (PFC3C) is used, does not create a fragment entry during processing of an ICMPv6 ACL, which has unspecified impact and remote attack vectors, aka Bug ID CSCtj90091.

Cisco IOS 12.2 and 12.3 on Cisco uBR10012 series devices, when linecard redundancy is configured, enables a read/write SNMP service with "private" as the community, which allows remote attackers to obtain administrative access by guessing this community and sending SNMP requests.

Stack-based buffer overflow in the Line Printer Daemon (LPD) in Cisco IOS before 12.2(18)SXF11, 12.4(16a), and 12.4(2)T6 allow remote attackers to execute arbitrary code by setting a long hostname on the target system, then causing an error message to be printed, as demonstrated by a telnet session to the LPD from a source port other than 515.

Integer overflow in Cisco IOS allows remote attackers to execute arbitrary code via unspecified vectors. NOTE: as of 20071016, the only disclosure is a vague pre-advisory with no actionable information. However, since it is from a well-known researcher, it is being assigned a CVE identifier for tracking purposes.