Summary

Out-of-bounds Write vulnerability in the bundled Brotli decoder in yjh0502 erl-brotli allows an attacker who supplies a crafted Brotli-compressed stream to brotli:decode/1 to corrupt decoder state memory, disclose memory contents, crash the Erlang VM, or potentially execute code.

erl-brotli compiles its own copy of the Google Brotli C sources under csrc into a NIF, and brotlidecoderdecompressstream in csrc/brotlinif.c hands the input to BrotliDecoderDecompressStream. In csrc/dec/decode.c, DecodeBlockTypeAndLength returns false for a block switch in a category with at most one block type, and the non-streaming callers DecodeLiteralBlockSwitch, DecodeCommandBlockSwitch and DecodeDistanceBlockSwitch discard that result, so decoding continues with inconsistent state. The decoder runs inside a NIF, so memory corruption or a crash takes down the whole VM rather than the calling process. Because the package carries its own copy of the library, the Brotli version installed on the host does not matter.

This issue affects brotli: from 0.3.0 before 0.3.4.

Impact

An attacker who can get an application to decode a Brotli stream they control, for example an HTTP client that decompresses Content-Encoding: br responses with this package, can crash the Erlang VM and potentially run code inside it.

Envoy is a cloud-native, open source edge and service proxy. Envoyproxy with a Brotli filter can get into an endless loop during decompression of Brotli data with extra input.

Envoy is a cloud-native, open source edge and service proxy. A crash was observed in EnvoyQuicServerStream::OnInitialHeadersComplete() with following call stack. It is a use-after-free caused by QUICHE continuing push request headers after StopReading() being called on the stream. As after StopReading(), the HCM's ActiveStream might have already be destroyed and any up calls from QUICHE could potentially cause use after free.

Envoy is a cloud-native, open source edge and service proxy. There is a crash at QuicheDataReader::PeekVarInt62Length(). It is caused by integer underflow in the QuicStreamSequencerBuffer::PeekRegion() implementation.

Envoy is a cloud-native, open source edge and service proxy. Due to how Envoy invoked the nlohmann JSON library, the library could throw an uncaught exception from downstream data if incomplete UTF-8 strings were serialized. The uncaught exception would cause Envoy to crash.

Envoy is a cloud-native, open source edge and service proxy. When an upstream TLS cluster is used with autosni enabled, a request containing a host/:authority header longer than 255 characters triggers an abnormal termination of Envoy process. Envoy does not gracefully handle an error when setting SNI for outbound TLS connection. The error can occur when Envoy attempts to use the host/:authority header value longer than 255 characters as SNI for outbound TLS connection. SNI length is limited to 255 characters per the standard. Envoy always expects this operation to succeed and abnormally aborts the process when it fails. This vulnerability is fixed in 1.30.1, 1.29.4, 1.28.3, and 1.27.5.

Envoy is a cloud-native, open source edge and service proxy. Envoy exposed an out-of-memory (OOM) vector from the mirror response, since async HTTP client will buffer the response with an unbounded buffer.

Envoy is a cloud-native, open source edge and service proxy. There is a use-after-free in HttpConnectionManager (HCM) with EnvoyQuicServerStream that can crash Envoy. An attacker can exploit this vulnerability by sending a request without FIN, then a RESETSTREAM frame, and then after receiving the response, closing the connection.

HTTP/2 Rapid reset attack The HTTP/2 protocol allows clients to indicate to the server that a previous stream should be canceled by sending a RSTSTREAM frame. The protocol does not require the client and server to coordinate the cancellation in any way, the client may do it unilaterally. The client may also assume that the cancellation will take effect immediately when the server receives the RSTSTREAM frame, before any other data from that TCP connection is processed.

Abuse of this feature is called a Rapid Reset attack because it relies on the ability for an endpoint to send a RSTSTREAM frame immediately after sending a request frame, which makes the other endpoint start working and then rapidly resets the request. The request is canceled, but leaves the HTTP/2 connection open.

The HTTP/2 Rapid Reset attack built on this capability is simple: The client opens a large number of streams at once as in the standard HTTP/2 attack, but rather than waiting for a response to each request stream from the server or proxy, the client cancels each request immediately.

The ability to reset streams immediately allows each connection to have an indefinite number of requests in flight. By explicitly canceling the requests, the attacker never exceeds the limit on the number of concurrent open streams. The number of in-flight requests is no longer dependent on the round-trip time (RTT), but only on the available network bandwidth.

In a typical HTTP/2 server implementation, the server will still have to do significant amounts of work for canceled requests, such as allocating new stream data structures, parsing the query and doing header decompression, and mapping the URL to a resource. For reverse proxy implementations, the request may be proxied to the backend server before the RSTSTREAM frame is processed. The client on the other hand paid almost no costs for sending the requests. This creates an exploitable cost asymmetry between the server and the client.

Multiple software artifacts implementing HTTP/2 are affected. This advisory was originally ingested from the swift-nio-http2 repo advisory and their original conent follows.

swift-nio-http2 specific advisory swift-nio-http2 is vulnerable to a denial-of-service vulnerability in which a malicious client can create and then reset a large number of HTTP/2 streams in a short period of time. This causes swift-nio-http2 to commit to a large amount of expensive work which it then throws away, including creating entirely new Channels to serve the traffic. This can easily overwhelm an EventLoop and prevent it from making forward progress.

swift-nio-http2 1.28 contains a remediation for this issue that applies reset counter using a sliding window. This constrains the number of stream resets that may occur in a given window of time. Clients violating this limit will have their connections torn down. This allows clients to continue to cancel streams for legitimate reasons, while constraining malicious actors.

Envoy is a cloud-native high-performance edge/middle/service proxy. Envoy’s HTTP/2 codec may leak a header map and bookkeeping structures upon receiving RSTSTREAM immediately followed by the GOAWAY frames from an upstream server. In nghttp2, cleanup of pending requests due to receipt of the GOAWAY frame skips de-allocation of the bookkeeping structure and pending compressed header. The error return [code path] is taken if connection is already marked for not sending more requests due to GOAWAY frame. The clean-up code is right after the return statement, causing memory leak. Denial of service through memory exhaustion. This vulnerability was patched in versions(s) 1.26.3, 1.25.8, 1.24.9, 1.23.11.

Envoy is a cloud-native, open source edge and service proxy. Prior to 1.36.1, 1.35.5, 1.34.9, and 1.33.10, large requests and responses can potentially trigger TCP connection pool crashes due to flow control management in Envoy. It will happen when the connection is closing but upstream data is still coming, resulting in a buffer watermark callback nullptr reference. The vulnerability impacts TCP proxy and HTTP 1 & 2 mixed use cases based on ALPN. This vulnerability is fixed in 1.36.1, 1.35.5, 1.34.9, and 1.33.10.

Envoy is an open source edge and service proxy. Envoy versions earlier than 1.36.2, 1.35.6, 1.34.10, and 1.33.12 contain a use-after-free vulnerability in the Lua filter. When a Lua script executing in the response phase rewrites a response body so that its size exceeds the configured perconnectionbufferlimitbytes (default 1MB), Envoy generates a local reply whose headers override the original response headers, leaving dangling references and causing a crash. This results in denial of service. Updating to versions 1.36.2, 1.35.6, 1.34.10, or 1.33.12 fixes the issue. Increasing perconnectionbufferlimitbytes (and for HTTP/2 the initialstreamwindowsize) or increasing perrequestbufferlimitbytes / requestbodybufferlimit can reduce the likelihood of triggering the condition but does not correct the underlying memory safety flaw.

Envoy is a cloud-native, open source edge and service proxy. The HTTP/2 protocol stack in Envoy versions prior to 1.29.3, 1.28.2, 1.27.4, and 1.26.8 are vulnerable to CPU exhaustion due to flood of CONTINUATION frames. Envoy's HTTP/2 codec allows the client to send an unlimited number of CONTINUATION frames even after exceeding Envoy's header map limits. This allows an attacker to send a sequence of CONTINUATION frames without the ENDHEADERS bit set causing CPU utilization, consuming approximately 1 core per 300Mbit/s of traffic and culminating in denial of service through CPU exhaustion. Users should upgrade to version 1.29.3, 1.28.2, 1.27.4, or 1.26.8 to mitigate the effects of the CONTINUATION flood. As a workaround, disable HTTP/2 protocol for downstream connections.

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy's extauthz filter assumes that a request contains a :path pseudoheader when applying queryparameterstoset or queryparameterstoremove from an authorization response. A path-less CONNECT request makes requestheaders->Path() return null, and Filter::onComplete dereferences that pointer while parsing the query string. An unauthenticated downstream client can crash the Envoy process when the filter and authorization response use query-parameter mutation. The relevant scope boundary is that the deployment must accept path-less CONNECT and configure extauthz query-parameter mutation. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1.

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy HTTP RBAC accepts RFC-valid opaque header bytes but evaluates saferegex values with RE2's UTF-8 subject semantics. A downstream client can preserve a prohibited marker and add an unrelated obs-text octet, causing RE2::FullMatch to return false and a negative RBAC policy to treat the invalid subject as an ordinary no-match. A byte-oriented route matcher can still observe the marker, allowing the request to reach a route intended to be denied. The relevant scope boundary is that plain positive ALLOW regexes normally fail closed, and exact, prefix, suffix, and contains matchers are not shown to have this subject-domain failure. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1.

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy normally matches the raw request path, while servlet backends such as Apache Tomcat strip semicolon matrix parameters from each path segment before resolving the resource. Envoy's ignorepathparametersinpathmatching option instead truncates at the first semicolon and still does not match per-segment backend behavior. A remote client can use a parameterized protected segment, or a parameter on an earlier segment, to make Envoy select an unprotected fallback while the backend resolves the protected resource. The relevant scope boundary is that the bypass requires both a path-based Envoy decision and a backend that strips semicolon parameters per segment. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1.

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy forwards data for a configured non-WebSocket HTTP upgrade before the upstream accepts the upgrade. An unauthenticated HTTP/2 client can place a complete HTTP/1.1 request in extended CONNECT data; Envoy downgrades the request, writes the data unframed to a keep-alive HTTP/1.1 upstream, and returns the socket to the shared pool while the smuggled response remains queued. A different downstream client can then receive the attacker's response. The relevant scope boundary is that webSocket upgrades, plain CONNECT, disabled backend keep-alive, per-downstream pools, and maxrequestsperconnection set to 1 are not affected by the demonstrated path. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1.

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy's HttpDatagramHandler caches the current RequestDecoder when Capsule Protocol is enabled. Stream recreation, including an internal redirect, replaces the ActiveStream and updates EnvoyQuicServerStream but does not update the handler's cached pointer. A subsequent HTTP/3 datagram can call decodeData through the freed decoder, causing invalid virtual dispatch and a process crash. The relevant scope boundary is that hTTP/3 datagrams and Capsule Protocol must be enabled, and the request must enter a stream-recreation path such as an internal redirect. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1.

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy's HTTP external-authorization client can retain a stale request callback after a request is rejected. When RawHttpClientImpl::onSuccess later processes the authorization response, it can invoke callbacks after the callback owner has been destroyed, causing a use-after-free and process crash under production traffic. The relevant scope boundary is that the vulnerable path uses the HTTP extauthz client; the advisory does not establish the same trigger for unrelated filters. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1.

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy's ProdClusterManagerFactory::allocateConnPool dereferences transportsocketoptions while selecting an HTTP/3 connection pool without first checking whether the pointer is null. LoadBalancerContext implementations used by synthetic, mirror, health-check, and async-client calls can return no transport-socket options. With autoconfig and HTTP/3 enabled, routine traffic reaching one of those contexts can crash an Envoy worker. The relevant scope boundary is that the affected branch requires HTTP/3 in the protocol set and a context that supplies no transport-socket options. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1.

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy's Utility::copyInternetAddressAndPort and QUIC client-address paths reconstruct scoped IPv6 addresses through addressAsString and Ipv6Instance. The string includes a percent scope identifier that inetpton cannot parse, causing an exception or abort. Kernel-provided scoped IPv6 destinations in ORIGINALDST transparent-proxy deployments, and affected QUIC connection paths, can therefore terminate the process. The relevant scope boundary is that the HTTP usehttpheader override rejects scoped addresses earlier; the advisory's crash path requires a kernel-provided original destination or the affected QUIC path. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1.

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, When ignorepathparametersinpathmatching is enabled, Envoy's router strips the semicolon suffix before matching but the RBAC urlpath matcher evaluates the raw path. A downstream request such as /admin;x can therefore miss a DENY rule for /admin while the router still selects the protected /admin backend. The inconsistent canonicalization allows an unauthenticated client to bypass path-based authorization. The relevant scope boundary is that the route option and a path-based RBAC rule must both be present, and the protected route must match after stripping. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1.

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy's optional oghttp2 upstream HTTP/2 codec accepts a response trailer HEADERS frame without ENDSTREAM. Envoy completes and deferred-deletes the ActiveRequest while oghttp2 keeps the stream open, leaving ClientStreamImpl with a dangling responsedecoder reference. A later frame on the stream can dispatch through the freed object and crash the process. The relevant scope boundary is that the default nghttp2 codec rejects the malformed trailers, and the trigger is upstream-only with oghttp2 enabled. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1.

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy copies every decoded HTTP/2 Host header value before discarding it when :authority is already present. The discarded value bypasses saveHeader, so its bytes and count are not charged against request header limits. An unauthenticated client can use HPACK indexing to submit many references to a large Host value across a bounded number of streams, forcing extreme header-copy allocation and causing the proxy to be out-of-memory killed. The relevant scope boundary is that the demonstrated amplification uses HTTP/2 HPACK and the duplicate Host discard behavior. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1.

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy's URL normalization does not recognize dot and dotdot path segments when they carry semicolon parameters. A request such as /user/..;foo=bar/admin is therefore not canonicalized to /admin even when path normalization is enabled. If an upstream interprets the segment according to RFC 3986 while Envoy applies routing or RBAC to the uncollapsed path, a remote client can cause path confusion and bypass path-based security policy. The relevant scope boundary is that the security consequence depends on a downstream/upstream path interpretation mismatch or a path-based Envoy decision. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1.

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy's /stats?format=html admin endpoint uses StatsHtmlRender, which sanitizes string statistic values but emits statistic names without HTML encoding. A data-plane component such as grpcstats with statsforallmethods enabled can incorporate attacker-controlled path segments into cached dynamic statistic names. When an operator views the HTML stats page, the stored name can execute script with the admin interface's origin and issue privileged same-origin requests. The relevant scope boundary is that the admin interface must be browser-accessible and an enabled component must persist attacker-influenced text in statistic names. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1.

A vulnerability was found in Envoy, where using SDS with Combined Validation Context Using the same secret (e.g. trusted CA) across many resources together with the combined validation context could lead to the “static” part of the validation context to be not applied, even though it was visible in the active config dump.

A vulnerability was found in Envoy version 1.13.0 or earlier may consume excessive amounts of memory when proxying HTTP/1.1 requests or responses with many small (i.e. 1 byte) chunks.

A vulnerability was found in Envoy version 1.13.0 or earlier may consume excessive amounts of memory when responding internally to pipelined requests.

Summary Envoy crashes when JWT authentication is configured with the remote JWKS fetching, allowmissingorfailed is enabled, multiple JWT tokens are present in the request headers and the JWKS fetch fails.

Details This is caused by a re-entry bug in the JwksFetcherImpl. When the first token's JWKS fetch fails, onJwksError() callback triggers processing of the second token, which calls fetch() again on the same fetcher object.

The original callback's reset() then clears the second fetch's state (receiver and request) which causes a crash when the async HTTP response arrives.

PoC allowmissingorfailed or allowmissing is enabled The client send 2 Authorization headers the remote JWKS fetching failed There will be crash

Impact DoS and Crash

Mitigation Disable the allowmissingorfailed or allowmissing