Where
AND
-Infinity
0
Severity
5.3
AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L

An Out-of-bounds Write vulnerability in the SNMP daemon (snmpd) of Juniper Networks Junos OS and Junos OS Evolved allows an authenticated network-based attacker sending specific valid SNMPv3 queries to trigger a memory leak. Over time, continuous receipt of these queries will result in snmpd process memory exhaustion, resulting in a process crash and restart, impacting the ability to monitor the system via SNMP.

Memory usage can be monitored using the following command:

user@device> show system processes extensive | match snmpd

This issue affects:

Junos OS:

all versions before 21.2R3-S8; from 21.4 before 21.4R3-S7; from 22.1 before 22.1R3-S6; from 22.2 before 22.2R3-S4; from 22.3 before 22.3R3-S3; from 22.4 before 22.4R3-S2; from 23.2 before 23.2R2; from 23.4 before 23.4R2.

Junos OS Evolved: all versions before 21.2R3-S8-EVO; from 21.4 before 21.4R3-S7-EVO; all versions of 22.1-EVO, from 22.2 before 22.2R3-S4-EVO; from 22.3 before 22.3R3-S3-EVO; all versions of 22.4-EVO, from 23.2 before 23.2R2-EVO; from 23.4 before 23.4R2-EVO.

First published (updated )
Severity
6.7
Null Pointer Dereference
AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H

A NULL Pointer Dereference vulnerability in the management daemon (mgd) of Juniper Networks Junos OS and Junos OS Evolved allows a local, high-privileged attacker setting or deactivating a specific SSH configuration parameter to create a Denial of Service (DoS).

A local high-privileged user configuring or deactivating a specific 'system services ssh' configuration parameter can exploit a null pointer dereference in one of the functions used by SSH. The function attempts to dereference a null pointer when accessing certain configuration data, resulting in an mgd process crash and restart. Continued execution of these configuration commands will create a sustained Denial of Service (DoS) condition.

This issue affects: Junos OS:

from 22.3 before 22.3R3-S5; from 22.4 before 22.4R3-S10; from 23.2 before 23.2R2-S7; from 23.4 before 23.4R2-S8.

This issue does not affect Junos OS before 22.3R1.

Junos OS Evolved: from 22.3R1-EVO before 23.2R2-S7-EVO; from 23.4 before 23.4R2-S8-EVO.

This issue does not affect Junos OS Evolved before 22.3R1-EVO.

First published (updated )
Severity
8.4
OS Command Injection, Command Injection
AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H

An OS Command Injection vulnerability in the CLI processing of Juniper Networks Junos OS and Junos OS Evolved allows a local, high-privileged attacker executing specific, crafted CLI commands to inject arbitrary shell commands as root, leading to a complete compromise of the system.

Certain 'set system' commands, when executed with crafted arguments, are not properly sanitized, allowing for arbitrary shell injection. These shell commands are executed as root, potentially allowing for complete control of the vulnerable system. This issue affects:

Junos OS:

all versions before 22.4R3-S8,  from 23.2 before 23.2R2-S5,  from 23.4 before 23.4R2-S7,  from 24.2 before 24.2R2-S2,  from 24.4 before 24.4R2,  from 25.2 before 25.2R2;

Junos OS Evolved:

all versions before 22.4R3-S8-EVO,  from 23.2 before 23.2R2-S5-EVO,  from 23.4 before 23.4R2-S7-EVO,  from 24.2 before 24.2R2-S2-EVO,  from 24.4 before 24.4R2-EVO,  from 25.2 before 25.2R1-S1-EVO, 25.2R2-EVO.

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS 22.4R3-S8, 23.2R2-S5, 23.4R2-S7, 24.2R2-S2, 24.4R2, 25.2R2, 25.4R1, and all subsequent releases. Junos OS Evolved 22.4R3-S8-EVO, 23.2R2-S5-EVO, 23.4R2-S7-EVO, 24.2R2-S2-EVO, 24.4R2-EVO, 25.2R1-S1-EVO, 25.2R2-EVO, 25.4R1-EVO, and all subsequent releases.
First published (updated )
Severity
8.7
AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

An Improper Check for Unusual or Exceptional Conditions vulnerability in the flow daemon (flowd) of Juniper Networks Junos OS on SRX Series allows an attacker sending a specific, malformed ICMPv6 packet to cause the srxpfe process to crash and restart. Continued receipt and processing of these packets will repeatedly crash the srxpfe process and sustain the Denial of Service (DoS) condition.

During NAT64 translation, receipt of a specific, malformed ICMPv6 packet destined to the device will cause the srxpfe process to crash and restart.

This issue cannot be triggered using IPv4 nor other IPv6 traffic.

This issue affects Junos OS on SRX Series: all versions before 21.2R3-S10, all versions of 21.3, from 21.4 before 21.4R3-S12, all versions of 22.1, from 22.2 before 22.2R3-S8, all versions of 22.4, from 22.4 before 22.4R3-S9, from 23.2 before 23.2R2-S6, from 23.4 before 23.4R2-S7, from 24.2 before 24.2R2-S3, from 24.4 before 24.4R2-S3, from 25.2 before 25.2R1-S2, 25.2R2.

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS: 21.2R3-S10, 21.4R3-S12, 22.4R3-S9, 23.2R2-S6, 23.4R2-S7, 24.2R2-S3, 24.4R2-S3, 25.2R1-S2, 25.2R2, 25.4R1, and all subsequent releases.
First published (updated )
Severity
8.7
AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

An Improper Validation of Syntactic Correctness of Input vulnerability in the IPsec library used by kmd and iked of Juniper Networks Junos OS on SRX Series and MX Series allows an unauthenticated, network-based attacker to cause a complete Denial-of-Service (DoS).

If an affected device receives a specifically malformed first ISAKMP packet from the initiator, the kmd/iked process will crash and restart, which momentarily prevents new security associations (SAs) for from being established. Repeated exploitation of this vulnerability causes a complete inability to establish new VPN connections.

This issue affects Junos OS on

SRX Series and MX Series:

all versions before 22.4R3-S9, 23.2 version before 23.2R2-S6, 23.4 version before 23.4R2-S7, 24.2 versions before 24.2R2-S4, 24.4 versions before 24.4R2-S3, 25.2 versions before 25.2R1-S2, 25.2R2.

Remedy

The following software releases have been updated to resolve this specific issue: 22.4R3-S9, 23.2R2-S6, 23.4R2-S7, 24.2R2-S4, 24.4R2-S3, 25.2R1-S2, 25.2R2, 25.4R1, and all subsequent releases.
First published (updated )
Severity
6.8
AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N

A Missing Authorization vulnerability in the CLI of Juniper Networks Junos OS and Junos OS Evolved allows a local user with low privileges to read sensitive information.

A local user with low privileges can execute the CLI command 'show mgd' with specific arguments which will expose sensitive information.

This issue affects

Junos OS: all versions before 22.4R3-S8, 23.2 versions before 23.2R2-S6, 23.4 versions before 23.4R2-S6, 24.2 versions before 24.2R2-S4, 24.4 versions before 24.4R2-S1, 25.2 version before 25.2R1-S2, 25.2R2;

Junos OS Evolved: all versions before 23.2R2-S6-EVO, 23.4 version before 23.4R2-S6-EVO, 24.2 version before 24.2R2-S4-EVO, 24.4 versions before 24.4R2-S1-EVO, 25.2 versions before 25.2R2-EVO.

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS Evolved: 23.2R2-S6-EVO, 23.4R2-S6-EVO, 24.2R2-S4-EVO, 24.4R2-S1-EVO, 25.2R2-EVO, 25.4R1-EVO, and all subsequent releases; Junos OS: 22.4R3-S8, 23.2R2-S6, 23.4R2-S6, 24.2R2-S4, 24.4R2-S1, 25.2R1-S2, 25.2R2, 25.4R1, and all subsequent releases.
First published (updated )
Severity
8.3
AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:L/A:N

An Improper Following of a Certificate's Chain of Trust vulnerability in J-Web of Juniper Networks Junos OS on SRX Series allows a PITM to intercept the communication of the device and get access to confidential information and potentially modify it.

When an SRX device is provisioned to connect to Security Director (SD) cloud, it doesn't perform sufficient verification of the received server certificate. This allows a PITM to intercept the communication between the SRX and SD cloud and access credentials and other sensitive information.

This issue affects Junos OS: all versions before 22.4R3-S9, 23.2 versions before 23.2R2-S6, 23.4 versions before 23.4R2-S7, 24.2 versions before 24.2R2-S3, 24.4 versions before 24.4R2-S2, 25.2 versions before 25.2R1-S2, 25.2R2.

Remedy

The following software releases have been updated to resolve this specific issue: 22.4R3-S9, 23.2R2-S6, 23.4R2-S7, 24.2R2-S3, 24.4R2-S2, 25.2R1-S2, 25.2R2, 25.4R1, and all subsequent releases.
First published (updated )
Severity
7.1
AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

A Missing Release of Memory after Effective Lifetime vulnerability in the BroadBand Edge subscriber management daemon (bbe-smgd) of Juniper Networks Junos OS on MX Series allows an adjacent, unauthenticated attacker to cause a Denial of Service (DoS).

If the authentication packet-type option is configured and a received packet does not match that packet type, the memory leak occurs. When all memory

available to bbe-smgd has been consumed, no new subscribers will be able to login.

The memory utilization of bbe-smgd can be monitored with the following show command:

user@host> show system processes extensive | match bbe-smgd

The below log message can be observed when this limit has been reached:

bbesmgd[<PID>]: %DAEMON-3-SMDDPROFRSMONERROR: Resource unavailability, Reason: Daemon Heap Memory exhaustion

This issue affects Junos OS on MX Series: all versions before 22.4R3-S8, 23.2 versions before 23.2R2-S5, 23.4 versions before 23.4R2-S6, 24.2 versions before 24.2R2-S2, 24.4 versions before 24.4R2, 25.2 versions before 25.2R2.

Remedy

The following software releases have been updated to resolve this specific issue: 22.4R3-S8, 23.2R2-S5, 23.4R2-S6, 24.2R2-S2, 24.4R2, 25.2R2, 25.4R1, and all subsequent releases.
First published (updated )
Severity
8.7
AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

A Missing Release of Memory after Effective Lifetime vulnerability in the DHCP daemon (jdhcpd) of Juniper Networks Junos OS on MX Series, allows an adjacent, unauthenticated attacker to cause a memory leak, that will eventually cause a complete Denial-of-Service (DoS).

In a DHCPv6 over PPPoE, or DHCPv6 over VLAN with Active lease query or Bulk lease query scenario, every subscriber logout will leak a small amount of memory. When all available memory has been exhausted, jdhcpd will crash and restart which causes a complete service impact until the process has recovered.

The memory usage of jdhcpd can be monitored with:

user@host> show system processes extensive | match jdhcpd

This issue affects Junos OS:

all versions before 22.4R3-S1, 23.2 versions before 23.2R2, 23.4 versions before 23.4R2.

Remedy

The following software releases have been updated to resolve this specific issue: 22.4R3-S1, 23.2R2, 23.4R2, 24.2R1, and all subsequent releases.
First published (updated )
Severity
7.1
AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

A Missing Release of Memory after Effective Lifetime vulnerability in the Layer 2 Address Learning Daemon (l2ald) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent, unauthenticated attacker to cause a memory leak ultimately leading to a Denial of Service (DoS).

In an EVPN-MPLS scenario, routes learned from remote multi-homed Provider Edge (PE) devices are programmed as ESI routes. Due to a logic issue in the l2ald memory management, memory allocated for these routes is not released when there is churn for these routes. As a result, memory leaks in the l2ald process which will ultimately lead to a crash and restart of l2ald.

Use the following command to monitor the memory consumption by l2ald:

user@device> show system process extensive | match "PID|l2ald"

This issue affects:

Junos OS:

all versions before 22.4R3-S5, 23.2 versions before 23.2R2-S3, 23.4 versions before 23.4R2-S4, 24.2 versions before 24.2R2;

Junos OS Evolved:

all versions before 22.4R3-S5-EVO, 23.2 versions before 23.2R2-S3-EVO, 23.4 versions before 23.4R2-S4-EVO, 24.2 versions before 24.2R2-EVO.

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS Evolved: 22.4R3-S5-EVO, 23.2R2-S3-EVO, 23.4R2-S4-EVO, 24.2R2-EVO, 24.4R1-EVO, and all subsequent releases; Junos OS: 22.4R3-S5, 23.2R2-S3, 23.4R2-S4, 24.2R2, 24.4R1, and all subsequent releases.
First published (updated )
Severity
8.5
AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

An Execution with Unnecessary Privileges vulnerability in the User Interface (UI) of Juniper Networks Junos OS and Junos OS Evolved allows a local, low-privileged attacker to gain root privileges, thus compromising the system.

When a configuration that allows unsigned Python op scripts is present on the device, a non-root user is able to execute malicious op scripts as a root-equivalent user, leading to privilege escalation.

This issue affects Junos OS:

All versions before 22.4R3-S7,  from 23.2 before 23.2R2-S4,  from 23.4 before 23.4R2-S6, from 24.2 before 24.2R1-S2, 24.2R2,  from 24.4 before 24.4R1-S2, 24.4R2;

Junos OS Evolved:

All versions before 22.4R3-S7-EVO,  from 23.2 before 23.2R2-S4-EVO,  from 23.4 before 23.4R2-S6-EVO, from 24.2 before 24.2R2-EVO,  from 24.4 before 24.4R1-S1-EVO, 24.4R2-EVO.

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS Evolved: 22.4R3-S7-EVO, 23.2R2-S4-EVO, 23.4R2-S6-EVO, 24.2R2-EVO, 24.4R1-S1-EVO, 24.4R2-EVO, 25.2R1-EVO and all subsequent releases. Junos OS: 22.4R3-S7, 23.2R2-S4, 23.4R2-S6, 24.2R1-S2, 24.2R2, 24.4R1-S2, 24.4R2, 25.2R1 and all subsequent releases.
First published (updated )
Severity
8.4
AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H

A Missing Authentication for Critical Function vulnerability in command processing of Juniper Networks Junos OS allows a privileged local attacker to gain access to Linux-based line cards as root.

This issue affects systems running Junos OS using Linux-based line cards. Affected line cards include: MPC7, MPC8, MPC9, MPC10, MPC11 LC2101, LC2103 LC480, LC4800, LC9600 MX304 (built-in FPC) MX-SPC3 SRX5K-SPC3 EX9200-40XS

FPC3-PTX-U2, FPC3-PTX-U3 FPC3-SFF-PTX LC1101, LC1102, LC1104, LC1105

This issue affects Junos OS:

all versions before 22.4R3-S8,  from 23.2 before 23.2R2-S6,  from 23.4 before 23.4R2-S6,  from 24.2 before 24.2R2-S3,  from 24.4 before 24.4R2, from 25.2 before 25.2R2.

First published (updated )
Severity
7.1
EPSS
0.04%
Use After Free
AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

A Use After Free vulnerability in the chassis daemon (chassisd) of Juniper Networks Junos OS and Junos OS Evolved allows a network-based attacker authenticated with low privileges to cause a Denial-of-Service (DoS).

When telemetry collectors are frequently subscribing and unsubscribing to sensors continuously over a long period of time, telemetry-capable processes like chassisd, rpd or mib2d will crash and restart, which - depending on the process - can cause a complete outage until the system has recovered.

This issue affects:

Junos OS:

all versions before 22.4R3-S8, 23.2 versions before 23.2R2-S5, 23.4 versions before 23.4R2;

Junos OS Evolved:

all versions before 22.4R3-S8-EVO, 23.2 versions before 23.2R2-S5-EVO, 23.4 versions before 23.4R2-EVO.

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS Evolved: 22.4R3-S8-EVO, 23.2R2-S5-EVO, 23.4R2-EVO, 24.2R1-EVO, and all subsequent releases; Junos OS: 22.4R3-S8, 23.2R2-S5, 23.4R2, 24.2R1, and all subsequent releases.
First published (updated )
Severity
8.7
EPSS
0.05%
Double Free
AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

A Double Free vulnerability in the flow processing daemon (flowd) of Juniper Networks Junos OS on SRX and MX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). On all SRX and MX Series platforms, when during TCP session establishment a specific sequence of packets is encountered a double free happens. This causes flowd to crash and the respective FPC to restart.

This issue affects Junos OS on SRX and MX Series:

all versions before 22.4R3-S7, 23.2 versions before 23.2R2-S3, 23.4 versions before 23.4R2-S4, 24.2 versions before 24.2R2.

Remedy

The following software releases have been updated to resolve this specific issue: 22.4R3-S7, 23.2R2-S3, 23.4R2-S4, 24.2R2, 24.4R1, and all subsequent releases.
First published (updated )
Severity
8.7
EPSS
0.04%
AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

An Improper Locking vulnerability in the GTP plugin of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (Dos).

If an SRX Series device receives a specifically malformed GPRS Tunnelling Protocol (GTP) Modify Bearer Request message, a lock is acquired and never released. This results in other threads not being able to acquire a lock themselves, causing a watchdog timeout leading to FPC crash and restart. This issue leads to a complete traffic outage until the device has automatically recovered.

This issue affects Junos OS on SRX Series:

all versions before 22.4R3-S8, 23.2 versions before 23.2R2-S5, 23.4 versions before 23.4R2-S6, 24.2 versions before 24.2R2-S3, 24.4 versions before 24.4R2-S2, 25.2 versions before 25.2R1-S1, 25.2R2.

Remedy

The following software releases have been updated to resolve this specific issue: 22.4R3-S8, 23.2R2-S5, 23.4R2-S6, 24.2R2-S3, 24.4R2-S2, 25.2R1-S1, 25.2R2, 25.4R1, and all subsequent releases.
First published (updated )
Severity
6.8
EPSS
0.01%
Race Condition
AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

A Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability in the method to collect FPC Ethernet firmware statistics of Juniper Networks Junos OS on MX10k Series allows a local, low-privileged attacker executing the 'show system firmware' CLI command to cause an LC480 or LC2101 line card to reset.

On MX10k Series systems with LC480 or LC2101 line cards, repeated execution of the 'show system firmware' CLI command can cause the line card to crash and restart. Additionally, some time after the line card crashes, chassisd may also crash and restart, generating a core dump.This issue affects Junos OS on MX10k Series:

all versions before 21.2R3-S10,  from 21.4 before 21.4R3-S9,  from 22.2 before 22.2R3-S7,  from 22.4 before 22.4R3-S6,  from 23.2 before 23.2R2-S2,  from 23.4 before 23.4R2-S3,  from 24.2 before 24.2R2.

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS 21.2R3-S10, 21.4R3-S9, 22.2R3-S7, 22.4R3-S6, 23.2R2-S2, 23.4R2-S3, 24.2R2, 24.4R1, and all subsequent releases.
First published (updated )
Severity
7.1
EPSS
0.02%
AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on EX4k Series and QFX5k Series platforms allows an unauthenticated network-adjacent attacker flapping an interface to cause traffic between VXLAN Network Identifiers (VNIs) to drop, leading to a Denial of Service (DoS).

On all EX4k and QFX5k platforms, a link flap in an

EVPN-VXLAN configuration Link Aggregation Group (LAG) results in Inter-VNI traffic dropping when there are multiple load-balanced next-hop routes for the same destination.

This issue is only applicable to systems that support EVPN-VXLAN Virtual Port-Link Aggregation Groups (VPLAG), such as the QFX5110, QFX5120, QFX5200, EX4100, EX4300, EX4400, and EX4650.

Service can only be restored by restarting the affected FPC via the 'request chassis fpc restart slot <slot-number>' command.

This issue affects Junos OS

on EX4k and QFX5k Series:

all versions before 21.4R3-S12,  all versions of 22.2 from 22.4 before 22.4R3-S8,  from 23.2 before 23.2R2-S5,  from 23.4 before 23.4R2-S5,  from 24.2 before 24.2R2-S3, from 24.4 before 24.4R2.

First published (updated )
Severity
8.7
EPSS
0.05%
AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

An Improper Handling of Exceptional Conditions vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on SRX Series allows an unauthenticated network-based attacker sending a specific ICMP packet through a GRE tunnel to cause the PFE to crash and restart.

When PowerMode IPsec (PMI) and GRE performance acceleration are enabled and the device receives a specific ICMP packet, a crash occurs in the SRX PFE, resulting in traffic loss. PMI is enabled by default, and GRE performance acceleration can be enabled by running the configuration command shown below. PMI is a mode of operation that provides IPsec performance improvements using Vector Packet Processing.

Note that PMI with GRE performance acceleration is only supported on specific SRX platforms. This issue affects Junos OS on the SRX Series:

all versions before 21.4R3-S12,  from 22.4 before 22.4R3-S8,  from 23.2 before 23.2R2-S5,  from 23.4 before 23.4R2-S5,  from 24.2 before 24.2R2-S3,  from 24.4 before 24.4R2-S1,  from 25.2 before 25.2R1-S1, 25.2R2.

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS 21.4R3-S12, 22.4R3-S8, 23.2R2-S5, 23.4R2-S5, 24.2R2-S3, 24.4R2-S1, 25.2R1-S1, 25.2R2, 25.4R1, and all subsequent releases.
First published (updated )
Severity
8.7
EPSS
0.05%
AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

A Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in the SIP application layer gateway (ALG) of Juniper Networks Junos OS on SRX Series and MX Series with MX-SPC3 or MS-MPC allows an unauthenticated network-based attacker sending specific SIP messages over TCP to crash the flow management process, leading to a Denial of Service (DoS).

On SRX Series, and MX Series with MX-SPC3 or MS-MPC service cards, receipt of multiple SIP messages causes the SIP headers to be parsed incorrectly, eventually causing a continuous loop and leading to a watchdog timer expiration, crashing the flowd process on SRX Series and MX Series with MX-SPC3, or mspmand process on MX Series with MS-MPC.

This issue only occurs over TCP. SIP messages sent over UDP cannot trigger this issue.

This issue affects Junos OS on SRX Series and MX Series with MX-SPC3 and MS-MPC:

all versions before 21.2R3-S10,  from 21.4 before 21.4R3-S12,  from 22.4 before 22.4R3-S8,  from 23.2 before 23.2R2-S5,  from 23.4 before 23.4R2-S6,  from 24.2 before 24.2R2-S3,  from 24.4 before 24.4R2-S1,  from 25.2 before 25.2R1-S1, 25.2R2.

Remedy

The following software releases have been updated to resolve this specific issue: 21.2R3-S10, 21.4R3-S12, 22.4R3-S8, 23.2R2-S5, 23.4R2-S6, 24.2R2-S3, 24.4R2-S1, 25.2R1-S1, 25.2R2, 25.4R1, and all subsequent releases.
First published (updated )
Severity
7.1
EPSS
0.04%
Buffer Overflow
AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

A Stack-based Buffer Overflow vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS allows a network-based attacker, authenticated with low privileges to cause a Denial-of-Service (DoS).

Subscribing to telemetry sensors at scale causes all FPC connections to drop, resulting in an FPC crash and restart. The issue was not seen when YANG packages for the specific sensors were installed.

This issue affects Junos OS:

all versions before 22.4R3-S7, 23.2 version before 23.2R2-S4, 23.4 versions before 23.4R2.

Remedy

The following software releases have been updated to resolve this specific issue: 22.4R3-S7, 23.2R2-S4, 23.4R2, 24.2R1, and all subsequent releases.
First published (updated )
Severity
7.1
EPSS
0.02%
AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

An Improper Handling of Exceptional Conditions vulnerability in packet processing of Juniper Networks Junos OS allows an unauthenticated, network-adjacent attacker sending a specifically malformed ICMP packet to cause an FPC to crash and restart, resulting in a Denial of Service (DoS).

When an ICMP packet is received with a specifically malformed IP header value, the FPC receiving the packet crashes and restarts. Due to the specific type of malformed packet, adjacent upstream routers would not forward the packet, limiting the attack surface to adjacent networks.

This issue only affects ICMPv4. ICMPv6 is not vulnerable to this issue.

This issue does not affect AFT-based line cards such as the MPC10, MPC11, LC4800, LC9600, and MX304.

This issue affects Junos OS:

all versions before 21.2R3-S9,  from 21.4 before 21.4R3-S10,  from 22.2 before 22.2R3-S7,  from 22.3 before 22.3R3-S4,  from 22.4 before 22.4R3-S5,  from 23.2 before 23.2R2-S3,  from 23.4 before 23.4R2-S3,  from 24.2 before 24.2R1-S2, 24.2R2.

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS 20.2R3-S10, 21.2R3-S9, 21.4R3-S10, 22.2R3-S7, 22.3R3-S4, 22.4R3-S5, 23.2R2-S3, 23.4R2-S3, 24.2R1-S2, 24.2R2, 24.4R1, and all subsequent releases.
First published (updated )
Severity
6.9
AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:L

An Improper Check for Unusual or Exceptional Conditions vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network-based attacker to cause an availability impact for downstream devices.

When an affected device receives a specific optional, transitive BGP attribute over an existing BGP session, it will be erroneously modified before propagation to peers. When the attribute is detected as malformed by the peers, these peers will most likely terminate the BGP sessions with the affected devices and thereby cause an availability impact due to the resulting routing churn.

This issue affects:

Junos OS:

all versions before 22.4R3-S8, 23.2 versions before 23.2R2-S5 23.4 versions before 23.4R2-S6, 24.2 versions before 24.2R2-S2, 24.4 versions before 24.4R2;

Junos OS Evolved:

all versions before 22.4R3-S8-EVO, 23.2 versions before 23.2R2-S5-EVO, 23.4 versions before 23.4R2-S6-EVO, 24.2 versions before 24.2R2-S2-EVO, 24.4 versions before 24.4R2-EVO.

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS Evolved: 22.4R3-S8-EVO, 23.2R2-S5-EVO, 23.4R2-S6-EVO, 24.2R2-S2-EVO, 24.4R2-EVO, 25.2R1-EVO, and all subsequent releases; Junos OS: 22.4R3-S8, 23.2R2-S5, 23.4R2-S6, 24.2R2-S2, 24.4R2, 25.2R1, and all subsequent releases.
First published (updated )
Severity
6.8
Null Pointer Dereference
AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

A NULL Pointer Dereference vulnerability in the chassis daemon (chassisd) of Juniper Networks Junos OS on MX, SRX and EX Series allows a local attacker with low privileges to cause a Denial-of-Service (DoS).

When a user executes the 'show chassis' command with specifically crafted options, chassisd will crash and restart. Due to this all components but the Routing Engine (RE) in the chassis are reinitialized, which leads to a complete service outage, which the system automatically recovers from.

This issue affects:

Junos OS on MX, SRX and EX Series, except MX10000 Series and MX304:

all versions before 22.4R3-S8, 23.2 versions before 23.2R2-S5, 23.4 versions before 23.4R2-S6, 24.2 versions before 24.2R2-S2, 24.4 versions before 24.4R2.

First published (updated )
Severity
8.7
AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

A Buffer Over-read vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).

When an affected device receives a BGP update with a set of specific optional transitive attributes over an established peering session, rpd will crash and restart when attempting to advertise the received information to another peer. This issue can only happen if one or both of the BGP peers of the receiving session are non-4-byte-AS capable as determined from the advertised capabilities during BGP session establishment. Junos OS and Junos OS Evolved default behavior is 4-byte-AS capable unless this has been specifically disabled by configuring:

[ protocols bgp ... disable-4byte-as ]

Established BGP sessions can be checked by executing:

show bgp neighbor <IP address> | match "4 byte AS"

This issue affects:

Junos OS:

all versions before 22.4R3-S8, 23.2 versions before 23.2R2-S5, 23.4 versions before 23.4R2-S6, 24.2 versions before 24.2R2-S2, 24.4 versions before 24.4R2;

Junos OS Evolved:

all versions before 22.4R3-S8-EVO, 23.2 versions before 23.2R2-S5-EVO, 23.4 versions before 23.4R2-S6-EVO, 24.2 versions before 24.2R2-S2-EVO, 24.4 versions before 24.4R2-EVO.

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS Evolved: 22.4R3-S8-EVO, 23.2R2-S5-EVO, 23.4R2-S6-EVO, 24.2R2-S2-EVO, 24.4R2-EVO, 25.2R1-EVO, and all subsequent releases; Junos OS: 22.4R3-S8, 23.2R2-S5, 23.4R2-S6, 24.2R2-S2, 24.4R2, 25.2R1, and all subsequent releases.
First published (updated )
Severity
6.8
AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:N

An Incorrect Permission Assignment for Critical Resource vulnerability in the Juniper DHCP daemon (jdhcpd) of Juniper Networks Junos OS and Junos OS Evolved allows a local, low-privileged user to write to the Unix socket used to manage the jdhcpd process, resulting in complete control over the resource.

This vulnerability allows any low-privileged user logged into the system to connect to the Unix socket and issue commands to manage the DHCP service, in essence, taking administrative control of the local DHCP server or DHCP relay.

This issue affects: Junos OS: all versions before 21.2R3-S10, all versions of 22.2, from 21.4 before 21.4R3-S12, from 22.4 before 22.4R3-S8, from 23.2 before 23.2R2-S5, from 23.4 before 23.4R2-S6, from 24.2 before 24.2R2-S2, from 24.4 before 24.4R2, from 25.2 before 25.2R1-S1, 25.2R2;

Junos OS Evolved: all versions before 22.4R3-S8-EVO, from 23.2 before 23.2R2-S5-EVO, from 23.4 before 23.4R2-S6-EVO, from 24.2 before 24.2R2-S2-EVO, from 24.4 before 24.4R2-EVO, from 25.2 before 25.2R1-S1-EVO, 25.2R2-EVO.

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS: 21.2R3-S10, 22.4R3-S8, 23.2R2-S5, 23.4R2-S6, 24.2R2-S2, 24.4R2, 25.2R1-S1, 25.2R2, 25.4R1, and all subsequent releases. Junos OS Evolved: 22.4R3-S8-EVO, 23.2R2-S5-EVO, 23.4R2-S6-EVO, 24.2R2-S2-EVO, 24.4R2-EVO, 25.2R1-S1-EVO, 25.2R2-EVO, 25.4R1-EVO, and all subsequent releases.
First published (updated )
Severity
7.4
AV:A/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:H

An Improper Check for Unusual or Exceptional Conditions vulnerability in the Juniper DHCP service (jdhcpd) of Juniper Networks Junos OS and Junos OS Evolved allows a DHCP client in one subnet to exhaust the address pools of other subnets, leading to a Denial of Service (DoS) on the downstream DHCP server.

By default, the DHCP relay agent inserts its own Option 82 information when forwarding client requests, optionally replacing any Option 82 information provided by the client. When a specific DHCP DISCOVER is received in 'forward-only' mode with Option 82, the device should drop the message unless 'trust-option82' is configured. Instead, the DHCP relay forwards these packets to the DHCP server unmodified, which uses up addresses in the DHCP server's address pool, ultimately leading to address pool exhaustion.

This issue affects Junos OS:

all versions before 21.2R3-S10, from 21.4 before 21.4R3-S12, all versions of 22.2, from 22.4 before 22.4R3-S8,  from 23.2 before 23.2R2-S5,  from 23.4 before 23.4R2-S6,  from 24.2 before 24.2R2-S2,  from 24.4 before 24.4R2,  from 25.2 before 25.2R1-S1, 25.2R2.

Junos OS Evolved:

all versions before 21.4R3-S12-EVO,  all versions of 22.2-EVO, from 22.4 before 22.4R3-S8-EVO,  from 23.2 before 23.2R2-S5-EVO,  from 23.4 before 23.4R2-S6-EVO,  from 24.2 before 24.2R2-S2-EVO,  from 24.4 before 24.4R2-EVO,  from 25.2 before 25.2R1-S1-EVO, 25.2R2-EVO.

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS 21.2R3-S10, 21.4R3-S12, 22.4R3-S8, 23.2R2-S5, 23.4R2-S6, 24.2R2-S2, 24.4R2, 25.2R1-S1, 25.2R2, 25.4R1, and all subsequent releases. Junos OS Evolved 21.4R3-S12-EVO, 22.4R3-S8-EVO, 23.2R2-S5-EVO, 23.4R2-S6-EVO, 24.2R2-S2-EVO, 24.4R2-EVO, 25.2R1-S1-EVO, 25.2R2-EVO, 25.4R1-EVO, and all subsequent releases.
First published (updated )
Severity
6.8
AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

An Untrusted Pointer Dereference vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a local, authenticated attacker with low privileges to cause a Denial-of-Service (DoS).

When the command 'show route < ( receive-protocol | advertising-protocol ) bgp > detail' is executed, and at least one of the routes in the intended output has specific attributes, this will cause an rpd crash and restart. 'show route ... extensive' is not affected.

This issue affects:

Junos OS:

all versions before 22.4R3-S8, 23.2 versions before 23.2R2-S5, 23.4 versions before 23.4R2-S5, 24.2 versions before 24.2R2-S2, 24.4 versions before 24.4R2;

Junos OS Evolved:

all versions before 22.4R3-S8-EVO,  23.2 versions before 23.2R2-S5-EVO, 23.4 versions before 23.4R2-S6-EVO, 24.2 versions before 24.2R2-S2-EVO, 24.4 versions before 24.4R2-EVO.

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS Evolved: 22.4R3-S8-EVO, 23.2R2-S5-EVO, 23.4R2-S6-EVO, 24.2R2-S2-EVO, 24.4R2-EVO, 25.2R1-EVO, and all subsequent releases; Junos OS: 22.4R3-S8, 23.2R2-S5, 23.4R2-S5, 24.2R2-S2, 24.4R2, 25.2R1, and all subsequent releases.
First published (updated )
Severity
5.4
AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:N

A password aging vulnerability in the RADIUS client of Juniper Networks Junos OS and Junos OS Evolved allows an authenticated, network-based attacker to access the device without enforcing the required password change.

Affected devices allow logins by users for whom the RADIUS server has responded with a reject and required the user to change the password as their password was expired. Therefore the policy mandating the password change is not enforced. This does not allow users to login with a wrong password, but only with the correct but expired one.

This issue affects:

Junos OS:

all versions before 22.4R3-S8, 23.2 versions before 23.2R2-S4, 23.4 versions before 23.4R2-S5, 24.2 versions before 24.2R2-S1, 24.4 versions before 24.4R1-S3, 24.4R2;

Junos OS Evolved:

all versions before 22.4R3-S8-EVO, 23.2 versions before 23.2R2-S4-EVO, 23.4 versions before 23.4R2-S5-EVO, 24.2 versions before 24.2R2-S1-EVO, 24.4 versions before 24.4R1-S3-EVO, 24.4R2-EVO.

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS Evolved: 22.4R3-S8-EVO, 23.2R2-S4-EVO, 23.4R2-S5-EVO, 24.2R2-S1-EVO, 24.4R1-S3-EVO, 24.4R2-EVO, 25.2R1-EVO, and all subsequent releases; Junos OS: 22.4R3-S8, 23.2R2-S4, 23.4R2-S5, 24.2R2-S1, 24.4R1-S3, 24.4R2, 25.2R1, and all subsequent releases.
First published (updated )
Severity
6.9
AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N

An Authentication Bypass by Primary Weakness

in the FTP server of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to get limited read-write access to files on the device. When the FTP server is enabled and a user named "ftp" or "anonymous" is configured, that user can login without providing the configured password and then has read-write access to their home directory.

This issue affects Junos OS:

all versions before 22.4R3-S8, 23.2 versions before 23.2R2-S3, 23.4 versions before 23.4R2.

Remedy

The following software releases have been updated to resolve this specific issue: 22.4R3-S8, 23.2R2-S3, 23.4R2, 24.2R1, and all subsequent releases.
First published (updated )
Severity
6
AV:A/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H

An Access of Uninitialized Pointer vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved with BGP sharding configured allows an attacker triggering indirect next-hop updates, along with timing outside the attacker's control, to cause rpd to crash and restart, leading to a Denial of Service (DoS).

With BGP sharding enabled, triggering route resolution of an indirect next-hop (e.g., an IGP route change over which a BGP route gets resolved), may cause rpd to crash and restart. An attacker causing continuous IGP route churn, resulting in repeated route re-resolution, will increase the likelihood of triggering this issue, leading to a potentially extended DoS condition.

This issue affects:

Junos OS:

all versions before 21.4R3-S6,  from 22.1 before 22.1R3-S6,  from 22.2 before 22.2R3-S3,  from 22.3 before 22.3R3-S3,  from 22.4 before 22.4R3,  from 23.2 before 23.2R2;

Junos OS Evolved:

all versions before 22.3R3-S3-EVO,  from 22.4 before 22.4R3-EVO,  from 23.2 before 23.2R2-EVO.

Versions before Junos OS 21.3R1 and Junos OS Evolved 21.3R1-EVO are unaffected by this issue.

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS 21.4R3-S6, 22.1R3-S6, 22.2R3-S3, 22.3R3-S3, 22.4R3, 23.2R2, 23.4R1, and all subsequent releases. Junos OS Evolved 22.3R3-S3-EVO, 22.4R3-EVO, 23.2R2-EVO, 23.4R1-EVO, and all subsequent releases.
First published (updated )

Contact

SecAlerts Pty Ltd.
132 Wickham Terrace
Fortitude Valley,
QLD 4006, Australia
info@secalerts.co
By using SecAlerts services, you agree to our services end-user license agreement. This website is safeguarded by reCAPTCHA and governed by the Google Privacy Policy and Terms of Service. All names, logos, and brands of products are owned by their respective owners, and any usage of these names, logos, and brands for identification purposes only does not imply endorsement. If you possess any content that requires removal, please get in touch with us.
© 2026 SecAlerts Pty Ltd.
ABN: 70 645 966 203, ACN: 645 966 203