Abnormal termination of an application can a cause a denial of service.

Applications performing certificate name checks (e.g., TLS clients checking server certificates) may attempt to read an invalid memory address when comparing the expected name with an otherName subject alternative name of an X.509 certificate. This may result in an exception that terminates the application program.

Note that basic certificate chain validation (signatures, dates, ...) is not affected, the denial of service can occur only when the application also specifies an expected DNS name, Email address or IP address.

TLS servers rarely solicit client certificates, and even when they do, they generally don't perform a name check against a "reference identifier" (expected identity), but rather extract the presented identity after checking the certificate chain. So TLS servers are generally not affected and the severity of the issue is Moderate.

The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL 1.1.1 and 1.0.2 are also not affected by this issue.

OpenSSL 3.3, 3.2, 3.1 and 3.0 are vulnerable to this issue.

OpenSSL 3.3 users should upgrade to OpenSSL 3.3.2

OpenSSL 3.2 users should upgrade to OpenSSL 3.2.3

OpenSSL 3.1 users should upgrade to OpenSSL 3.1.7

OpenSSL 3.0 users should upgrade to OpenSSL 3.0.15

Issue summary: Use of the low-level GF(2^m) elliptic curve APIs with untrusted explicit values for the field polynomial can lead to out-of-bounds memory reads or writes.

Impact summary: Out of bound memory writes can lead to an application crash or even a possibility of a remote code execution, however, in all the protocols involving Elliptic Curve Cryptography that we're aware of, either only "named curves" are supported, or, if explicit curve parameters are supported, they specify an X9.62 encoding of binary (GF(2^m)) curves that can't represent problematic input values. Thus the likelihood of existence of a vulnerable application is low.

In particular, the X9.62 encoding is used for ECC keys in X.509 certificates, so problematic inputs cannot occur in the context of processing X.509 certificates. Any problematic use-cases would have to be using an "exotic" curve encoding.

The affected APIs include: ECGROUPnewcurveGF2m(), ECGROUPnewfromparams(), and various supporting BNGF2m() functions.

Applications working with "exotic" explicit binary (GF(2^m)) curve parameters, that make it possible to represent invalid field polynomials with a zero constant term, via the above or similar APIs, may terminate abruptly as a result of reading or writing outside of array bounds. Remote code execution cannot easily be ruled out.

The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.

Issue summary: A timing side-channel which could potentially allow recovering the private key exists in the ECDSA signature computation.

Impact summary: A timing side-channel in ECDSA signature computations could allow recovering the private key by an attacker. However, measuring the timing would require either local access to the signing application or a very fast network connection with low latency.

There is a timing signal of around 300 nanoseconds when the top word of the inverted ECDSA nonce value is zero. This can happen with significant probability only for some of the supported elliptic curves. In particular the NIST P-521 curve is affected. To be able to measure this leak, the attacker process must either be located in the same physical computer or must have a very fast network connection with low latency. For that reason the severity of this vulnerability is Low.

The FIPS modules in 3.4, 3.3, 3.2, 3.1 and 3.0 are affected by this issue.

Issue summary: Clients using RFC7250 Raw Public Keys (RPKs) to authenticate a server may fail to notice that the server was not authenticated, because handshakes don't abort as expected when the SSLVERIFYPEER verification mode is set.

Impact summary: TLS and DTLS connections using raw public keys may be vulnerable to man-in-middle attacks when server authentication failure is not detected by clients.

RPKs are disabled by default in both TLS clients and TLS servers. The issue only arises when TLS clients explicitly enable RPK use by the server, and the server, likewise, enables sending of an RPK instead of an X.509 certificate chain. The affected clients are those that then rely on the handshake to fail when the server's RPK fails to match one of the expected public keys, by setting the verification mode to SSLVERIFYPEER.

Clients that enable server-side raw public keys can still find out that raw public key verification failed by calling SSLgetverifyresult(), and those that do, and take appropriate action, are not affected. This issue was introduced in the initial implementation of RPK support in OpenSSL 3.2.

The FIPS modules in 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.

A flaw was found in OpenSSL. The issue in CVE-2022-1292 did not find other places in the crehash script where it possibly passed the file names of certificates being hashed to a command executed through the shell. Some operating systems distribute this script in a manner where it is automatically executed. On these operating systems, this flaw allows an attacker to execute arbitrary commands with the privileges of the script.

A use after free can have a range of potential consequences such as the corruption of valid data, crashes or execution of arbitrary code. However, only applications that directly call the SSLfreebuffers function are affected by this issue. Applications that do not call this function are not vulnerable. Our investigations indicate that this function is rarely used by applications.

The SSLfreebuffers function is used to free the internal OpenSSL buffer used when processing an incoming record from the network. The call is only expected to succeed if the buffer is not currently in use. However, two scenarios have been identified where the buffer is freed even when still in use.

The first scenario occurs where a record header has been received from the network and processed by OpenSSL, but the full record body has not yet arrived. In this case calling SSLfreebuffers will succeed even though a record has only been partially processed and the buffer is still in use.

The second scenario occurs where a full record containing application data has been received and processed by OpenSSL but the application has only read part of this data. Again a call to SSLfreebuffers will succeed even though the buffer is still in use.

While these scenarios could occur accidentally during normal operation a malicious attacker could attempt to engineer a stituation where this occurs. We are not aware of this issue being actively exploited.

The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.

OpenSSL 1.0.2 is also not affected by this issue.

OpenSSL 3.3, 3.2, 3.1, 3.0 and 1.1.1 are vulnerable to this issue.

OpenSSL 3.3 users should upgrade to OpenSSL 3.3.1 once it is released.

OpenSSL 3.2 users should upgrade to OpenSSL 3.2.2 once it is released.

OpenSSL 3.1 users should upgrade to OpenSSL 3.1.6 once it is released.

OpenSSL 3.0 users should upgrade to OpenSSL 3.0.14 once it is released.

OpenSSL 1.1.1 users should upgrade to OpenSSL 1.1.1y once it is released (premium support customers only).

Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available. The fix is also available in commit e5093133c3 (for 3.3), commit c88c3de510 (for 3.2), commit 704f725b96 (for 3.1) and commit b3f0eb0a29 (for 3.0) in the OpenSSL git repository. It is available to premium support customers in commit f7a045f314 (for 1.1.1).

This issue was reported on 10th April 2024 by William Ahern (Akamai). The fix was developed by Matt Caswell and Watson Ladd (Akamai).

Issue summary: Calling the OpenSSL API function SSLselectnextproto with an empty supported client protocols buffer may cause a crash or memory contents to be sent to the peer.

A use-after-free vulnerability in the Linux kernel's netfilter: nftables component can be exploited to achieve local privilege escalation.

The nftverdictinit() function allows positive values as drop error within the hook verdict, and hence the nfhookslow() function can cause a double free vulnerability when NFDROP is issued with a drop error which resembles NFACCEPT.

We recommend upgrading past commit f342de4e2f33e0e39165d8639387aa6c19dff660.

A vulnerability was found in cgroupreleaseagentwrite in kernel/cgroup/cgroup-v1.c in the Linux kernel. In this flaw, under certain circumstances, the cgroups v1 releaseagent feature can be used to escalate privilege and bypass namespace isolation unexpectedly.

Upstream Commit:

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=24f6008564183aa120d07c03d9289519c2fe02af

A race problem was seen in the vtkioctl in drivers/tty/vt/vtioctl.c in the Linux kernel, which may cause an out of bounds read in vt as the write access to vcmode is not protected by lock-in vtioctl (KDSETMDE). The highest threat from this vulnerability is to data confidentiality.

A use-after-free read flaw was found in sockgetsockopt() in net/core/sock.c due to SOPEERCRED and SOPEERGROUPS race with listen() (and connect()) in the Linux kernel. In this flaw, an attacker with a user privilege may lead to a system crash or a leak of internal kernel information.

In this, if the creds are replaced and freed at the wrong time, a use-after-free read occurs.

References:

https://lore.kernel.org/netdev/20210929225750.2548112-1-eric.dumazet@gmail.com/T/ https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=35306eb23814 https://bugs.chromium.org/p/project-zero/issues/detail?id=2230&can=7&q=modified-after%3Atoday-30&sort=-modified&colspec=ID%20Type%20Status%20Priority%20Milestone%20Owner%20Summary%20Modified%20Cve&cells=tiles&redir=1

A TCP/IP packet spoofing attack flaw was found in the Linux kernel’s TCP/IP protocol, where a Man-in-the-Middle Attack (MITM) performs an IP fragmentation attack and an IPID collision. This flaw allows a remote user to pretend to be the sender of the TCP/IP packet for an existing TCP/IP session.

gadgetdevdescUDCstore in drivers/usb/gadget/configfs.c in the Linux kernel 3.16 through 5.6.13 relies on kstrdup without considering the possibility of an internal '\0' value, which allows attackers to trigger an out-of-bounds read, aka CID-15753588bcd4.

A flaw was found in the Linux kernel, where it allows userspace processes, for example, a guest VM, to directly access h/w devices via its VFIO driver modules. The VFIO modules allow users to enable or disable access to the devices' MMIO memory address spaces. If a user attempts to access the read/write devices' MMIO address space when it is disabled, some h/w devices issue an interrupt to the CPU to indicate a fatal error condition, crashing the system. This flaw allows a guest user or process to crash the host system resulting in a denial of service.

A vulnerability was found in sgwrite in drivers/scsi/sg.c in SCSI generic (sg) driver subsystem. An attacker with a local access and special user privilege (or root) can cause a denial of service (DoS) if allocated list is not cleaned with invalid (Sgfd sfp) pointer at the time of failure, failing this can even cause a kernel internal information leak problem.

Reference and upstream commit: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=83c6f2390040f188cc25b270b4befeb5628c1aee

A flaw was found in the Linux kernel on s390 architecture. The issue occurs on multiprocessing systems when one s390 CPU is in Secondary Address Mode and another CPU does a kernel page table upgrade. An inter-processor interrupt (IPI) is then sent to each active CPU to update the control registers with new page table addresses. In Secondary Address Mode the CPU's CR1 register may hold kernel space address to fetch instructions from, but after IPI processing, the same CR1 register is set to point to a user space address. An unprivileged user or process on the system may use this flaw to crash the system or escalate their privileges on the system. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.

Excessive time spent checking DSA keys and parameters

Vim is an open source command line text editor. When performing a search and displaying the search-count message is disabled (:set shm+=S), the search pattern is displayed at the bottom of the screen in a buffer (msgbuf). When right-left mode (:set rl) is enabled, the search pattern is reversed. This happens by allocating a new buffer. If the search pattern contains some ASCII NUL characters, the buffer allocated will be smaller than the original allocated buffer (because for allocating the reversed buffer, the strlen() function is called, which only counts until it notices an ASCII NUL byte ) and thus the original length indicator is wrong. This causes an overflow when accessing characters inside the msgbuf by the previously (now wrong) length of the msgbuf. The issue has been fixed as of Vim patch v9.1.0689.

Change to loop-limit adjustments introduced a possible overflow in the computation of loop limits.

A vulnerability was discovered in Python. A quadratic algorithm exists when processing inputs to the IDNA (RFC 3490) decoder, such that a crafted unreasonably long name being presented to the decoder could lead to a CPU denial of service. Hostnames are often supplied by remote servers that could be controlled by a malicious actor, which could trigger excessive CPU consumption on the client attempting to make use of an attacker-supplied hostname.

A buffer overflow was discovered in the GNU C Library's dynamic loader ld.so while processing the GLIBCTUNABLES environment variable. This issue could allow a local attacker to use maliciously crafted GLIBCTUNABLES environment variables when launching binaries with SUID permission to execute code with elevated privileges.

Issue summary: Some non-default TLS server configurations can cause unbounded memory growth when processing TLSv1.3 sessions

A security regression (CVE-2006-5051) was discovered in OpenSSH's server (sshd). There is a race condition which can lead sshd to handle some signals in an unsafe manner. An unauthenticated, remote attacker may be able to trigger it by failing to authenticate within a set time period.

Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability during JSP compilation in Apache Tomcat permits an RCE on case insensitive file systems when the default servlet is enabled for write (non-default configuration).

This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.1, from 10.1.0-M1 through 10.1.33, from 9.0.0.M1 through 9.0.97.

The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.0 though 8.5.100. Other, older, EOL versions may also be affected.

Users are recommended to upgrade to version 11.0.2, 10.1.34 or 9.0.98, which fixes the issue.

A vulnerability was found in curl. This issue occurs because when curl saves cookies, alt-svc, and HSTS data to local files, it makes the operation atomic by finalizing the process with a rename from a temporary name to the final target file name. This flaw leads to unpreserved file permissions, either by mistake or by a malicious actor.

A vulnerability was found in curl. This issue occurs because it mishandles message verification failures when curl does FTP transfers secured by krb5. This flaw makes it possible for a Man-in-the-middle attack to go unnoticed and allows data injection into the client.

A flaw was found in libxml2. A call to the xmlGetID function can return a pointer already freed when parsing an XML document with the XMLPARSEDTDVALID option and without the XMLPARSENOENT option, resulting in a use-after-free issue.

An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S) IMAP(S) POP3(S) and LDAP(S) (openldap only).

A vulnerability was found in curl. This issue occurs because the number of acceptable "links" in the "decompression chain" was unbounded, allowing a malicious server to insert a virtually unlimited number of compression steps. This flaw leads to a denial of service, either by mistake or by a malicious actor.

A flaw was found in Apache Santuario (XML Security for Java) in the way it processed some paths. A remote attacker could use this flaw to circumvent the "secure validation" feature and disclose potentially sensitive information in local XML files.