Last updated 5 May 2025

A vulnerability was found in GNU Binutils 2.43. It has been declared as problematic. Affected by this vulnerability is the function bfdputl64 of the file libbfd.c of the component ld. The manipulation leads to memory corruption. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. The identifier of the patch is 75086e9de1707281172cc77f178e7949a4414ed0. It is recommended to apply a patch to fix this issue.

A vulnerability was found in OpenSSH when the VerifyHostKeyDNS option is enabled. A machine-in-the-middle attack can be performed by a malicious machine impersonating a legit server. This issue occurs due to how OpenSSH mishandles error codes in specific conditions when verifying the host key. For an attack to be considered successful, the attacker needs to manage to exhaust the client's memory resource first, turning the attack complexity high.

Impact When a special crafted packet is received via SslHandler it doesn't correctly handle validation of such a packet in all cases which can lead to a native crash.

Workarounds As workaround its possible to either disable the usage of the native SSLEngine or changing the code from:

SslContext context = ...; SslHandler handler = context.newHandler(....);

to:

SslContext context = ...; SSLEngine engine = context.newEngine(....); SslHandler handler = new SslHandler(engine, ....);

Issue summary: A timing side-channel which could potentially allow recovering the private key exists in the ECDSA signature computation.

Impact summary: A timing side-channel in ECDSA signature computations could allow recovering the private key by an attacker. However, measuring the timing would require either local access to the signing application or a very fast network connection with low latency.

There is a timing signal of around 300 nanoseconds when the top word of the inverted ECDSA nonce value is zero. This can happen with significant probability only for some of the supported elliptic curves. In particular the NIST P-521 curve is affected. To be able to measure this leak, the attacker process must either be located in the same physical computer or must have a very fast network connection with low latency. For that reason the severity of this vulnerability is Low.

The FIPS modules in 3.4, 3.3, 3.2, 3.1 and 3.0 are affected by this issue.

Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data as well as unauthorized read access to a subset of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data.

Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security.

Oracle Critical Patch Update Advisory - January 2025: https://www.oracle.com/security-alerts/cpujan2025.html#AppendixJAVA

gio/gsocks4aproxy.c in GNOME GLib before 2.82.1 has an off-by-one error and resultant buffer overflow because SOCKS4CONNMSGLEN is not sufficient for a trailing '\0' character.

An issue was discovered in libexpat before 2.6.4. There is a crash within the XMLResumeParser function because XMLStopParser can stop/suspend an unstarted parser.

Issue summary: Use of the low-level GF(2^m) elliptic curve APIs with untrusted explicit values for the field polynomial can lead to out-of-bounds memory reads or writes.

Impact summary: Out of bound memory writes can lead to an application crash or even a possibility of a remote code execution, however, in all the protocols involving Elliptic Curve Cryptography that we're aware of, either only "named curves" are supported, or, if explicit curve parameters are supported, they specify an X9.62 encoding of binary (GF(2^m)) curves that can't represent problematic input values. Thus the likelihood of existence of a vulnerable application is low.

In particular, the X9.62 encoding is used for ECC keys in X.509 certificates, so problematic inputs cannot occur in the context of processing X.509 certificates. Any problematic use-cases would have to be using an "exotic" curve encoding.

The affected APIs include: ECGROUPnewcurveGF2m(), ECGROUPnewfromparams(), and various supporting BNGF2m() functions.

Applications working with "exotic" explicit binary (GF(2^m)) curve parameters, that make it possible to represent invalid field polynomials with a zero constant term, via the above or similar APIs, may terminate abruptly as a result of reading or writing outside of array bounds. Remote code execution cannot easily be ruled out.

The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.

Description There exists a security vulnerability in Jetty's DosFilter which can be exploited by unauthorized users to cause remote denial-of-service (DoS) attack on the server using DosFilter. By repeatedly sending crafted requests, attackers can trigger OutofMemory errors and exhaust the server's memory finally.

Vulnerability details The Jetty DoSFilter (Denial of Service Filter) is a security filter designed to protect web applications against certain types of Denial of Service (DoS) attacks and other abusive behavior. It helps to mitigate excessive resource consumption by limiting the rate at which clients can make requests to the server. The DoSFilter monitors and tracks client request patterns, including request rates, and can take actions such as blocking or delaying requests from clients that exceed predefined thresholds. The internal tracking of requests in DoSFilter is the source of this OutOfMemory condition.

Impact Users of the DoSFilter may be subject to DoS attacks that will ultimately exhaust the memory of the server if they have not configured session passivation or an aggressive session inactivation timeout.

Patches The DoSFilter has been patched in all active releases to no longer support the session tracking mode, even if configured.

Patched releases:

9.4.54 10.0.18 11.0.18 12.0.3

Apache Commons IO: Possible denial of service attack on untrusted input to XmlStreamReader

A vulnerability was found in Apache Avro. The project would be affected if it accepts an Avro schema for parsing provided by the end-user. By using the special "java-class" attribute an attacker can trigger remote code execution. The issue is fixed in Avro 1.11.4 and 1.12.0.

Summary When parsing unknown fields in the Protobuf Java Lite and Full library, a maliciously crafted message can cause a StackOverflow error and lead to a program crash.

Reporter: Alexis Challande, Trail of Bits Ecosystem Security Team <ecosystem@trailofbits.com>

Affected versions: This issue affects all versions of both the Java full and lite Protobuf runtimes, as well as Protobuf for Kotlin and JRuby, which themselves use the Java Protobuf runtime.

Severity CVE-2024-7254 High CVSS4.0 Score 8.7 (NOTE: there may be a delay in publication) This is a potential Denial of Service. Parsing nested groups as unknown fields with DiscardUnknownFieldsParser or Java Protobuf Lite parser, or against Protobuf map fields, creates unbounded recursions that can be abused by an attacker.

Proof of Concept For reproduction details, please refer to the unit tests (Protobuf Java LiteTest and CodedInputStreamTest) that identify the specific inputs that exercise this parsing weakness.

Remediation and Mitigation We have been working diligently to address this issue and have released a mitigation that is available now. Please update to the latest available versions of the following packages: protobuf-java (3.25.5, 4.27.5, 4.28.2) protobuf-javalite (3.25.5, 4.27.5, 4.28.2) protobuf-kotlin (3.25.5, 4.27.5, 4.28.2) protobuf-kotlin-lite (3.25.5, 4.27.5, 4.28.2) com-protobuf [JRuby gem only] (3.25.5, 4.27.5, 4.28.2)

cURL libcurl could allow a remote attacker to bypass security restrictions, caused by a flaw when using OCSP stapling to validate server cerficate. By sending a specially crafted request, an attacker could exploit this vulnerability to establish the connection even if the certificate is revoked.

Abnormal termination of an application can a cause a denial of service.

Applications performing certificate name checks (e.g., TLS clients checking server certificates) may attempt to read an invalid memory address when comparing the expected name with an otherName subject alternative name of an X.509 certificate. This may result in an exception that terminates the application program.

Note that basic certificate chain validation (signatures, dates, ...) is not affected, the denial of service can occur only when the application also specifies an expected DNS name, Email address or IP address.

TLS servers rarely solicit client certificates, and even when they do, they generally don't perform a name check against a "reference identifier" (expected identity), but rather extract the presented identity after checking the certificate chain. So TLS servers are generally not affected and the severity of the issue is Moderate.

The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL 1.1.1 and 1.0.2 are also not affected by this issue.

OpenSSL 3.3, 3.2, 3.1 and 3.0 are vulnerable to this issue.

OpenSSL 3.3 users should upgrade to OpenSSL 3.3.2

OpenSSL 3.2 users should upgrade to OpenSSL 3.2.3

OpenSSL 3.1 users should upgrade to OpenSSL 3.1.7

OpenSSL 3.0 users should upgrade to OpenSSL 3.0.15

In Spring Framework versions 5.3.0 - 5.3.38 and older unsupported versions, it is possible for a user to provide a specially crafted Spring Expression Language (SpEL) expression that may cause a denial of service (DoS) condition.

Specifically, an application is vulnerable when the following is true:

The application evaluates user-supplied SpEL expressions.

A RangeCheckElimination array index overflow was found in OpenJDK.

Oracle CPU advisory - July 2024: https://www.oracle.com/security-alerts/cpujul2024.html#AppendixJAVA

An unspecified vulnerability in Java SE related to the VM component could allow a remote attacker to cause low confidentiality, low integrity impacts.

An unspecified vulnerability in Java SE related to the VM component could allow a remote attacker to cause a low availability impact.

A potential UTF8 size overflow vulnerability was found in OpenJDK.

Oracle CPU advisory - July 2024: https://www.oracle.com/security-alerts/cpujul2024.html#AppendixJAVA

A security regression (CVE-2006-5051) was discovered in OpenSSH's server (sshd). There is a race condition which can lead sshd to handle some signals in an unsafe manner. An unauthenticated, remote attacker may be able to trigger it by failing to authenticate within a set time period.

Issue summary: Calling the OpenSSL API function SSLselectnextproto with an empty supported client protocols buffer may cause a crash or memory contents to be sent to the peer.

Last updated 31 October 2024

A use after free can have a range of potential consequences such as the corruption of valid data, crashes or execution of arbitrary code. However, only applications that directly call the SSLfreebuffers function are affected by this issue. Applications that do not call this function are not vulnerable. Our investigations indicate that this function is rarely used by applications.

The SSLfreebuffers function is used to free the internal OpenSSL buffer used when processing an incoming record from the network. The call is only expected to succeed if the buffer is not currently in use. However, two scenarios have been identified where the buffer is freed even when still in use.

The first scenario occurs where a record header has been received from the network and processed by OpenSSL, but the full record body has not yet arrived. In this case calling SSLfreebuffers will succeed even though a record has only been partially processed and the buffer is still in use.

The second scenario occurs where a full record containing application data has been received and processed by OpenSSL but the application has only read part of this data. Again a call to SSLfreebuffers will succeed even though the buffer is still in use.

While these scenarios could occur accidentally during normal operation a malicious attacker could attempt to engineer a stituation where this occurs. We are not aware of this issue being actively exploited.

The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.

OpenSSL 1.0.2 is also not affected by this issue.

OpenSSL 3.3, 3.2, 3.1, 3.0 and 1.1.1 are vulnerable to this issue.

OpenSSL 3.3 users should upgrade to OpenSSL 3.3.1 once it is released.

OpenSSL 3.2 users should upgrade to OpenSSL 3.2.2 once it is released.

OpenSSL 3.1 users should upgrade to OpenSSL 3.1.6 once it is released.

OpenSSL 3.0 users should upgrade to OpenSSL 3.0.14 once it is released.

OpenSSL 1.1.1 users should upgrade to OpenSSL 1.1.1y once it is released (premium support customers only).

Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available. The fix is also available in commit e5093133c3 (for 3.3), commit c88c3de510 (for 3.2), commit 704f725b96 (for 3.1) and commit b3f0eb0a29 (for 3.0) in the OpenSSL git repository. It is available to premium support customers in commit f7a045f314 (for 1.1.1).

This issue was reported on 10th April 2024 by William Ahern (Akamai). The fix was developed by Matt Caswell and Watson Ladd (Akamai).

After a failed cache insertion, addgetnetgrentX tries to send the non-existing response after the not-found header.

In addinnetgrX, addgetnetgrentX may have produced a NULL result, indicating a not-found status, but this is not handled in the subsequent code that prepares the record that will be sent out to the client.

Reference: https://sourceware.org/bugzilla/showbug.cgi?id=31678

Vulnerability in the MySQL Server product of Oracle MySQL (component: Server: Audit Plug-in). Supported versions that are affected are 8.0.35 and prior and 8.2.0 and prior. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server. CVSS 3.1 Base Score 4.9 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H).

Vulnerability in the MySQL Server product of Oracle MySQL (component: Server: DML). Supported versions that are affected are 8.0.34 and prior. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server. CVSS 3.1 Base Score 4.9 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H).

Vulnerability in the MySQL Server product of Oracle MySQL (component: Server: DML). Supported versions that are affected are 8.0.34 and prior. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server. CVSS 3.1 Base Score 4.9 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H).

Vulnerability in the MySQL Server product of Oracle MySQL (component: Server: Optimizer). Supported versions that are affected are 8.0.35 and prior. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server. CVSS 3.1 Base Score 4.9 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H).

Vulnerability in the MySQL Server product of Oracle MySQL (component: Server: DML). Supported versions that are affected are 8.0.34 and prior. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server. CVSS 3.1 Base Score 4.9 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H).