Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an authenticated attacker may cause a heap buffer overflow through an out-of-bounds write in the Codec2 decoder caused by a floor/ceil sample-count mismatch. The codeccodec2 module must be loaded and Codec2 must be configured on the attacked endpoint. The attacker must pass SIP authentication by username/password or source IP address matching, establish a call using Codec2, and send carefully crafted Codec2 audio packets. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.

Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, appsms.c copies externally controlled SMS lengths into fixed in-struct buffers without sufficient bounds checks, allowing an attacker to corrupt memory or crash Asterisk. The administrator must explicitly use the SMS dialplan application, which is useful when routing calls to or from analog devices, and must not have ensured that data passed to the application is valid. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.

Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, appsms.c copies externally controlled SMS lengths into fixed in-struct buffers without sufficient bounds checks, allowing an attacker to corrupt memory or crash Asterisk. The administrator must explicitly use the SMS dialplan application, which is useful when routing calls to or from analog devices, and must not have ensured that data passed to the application is valid. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.

Asterisk is an open source private branch exchange and telephony toolkit. In affected deployments, an authenticated attacker may cause a T.140 RED heap buffer overflow using carefully crafted packets, potentially allowing remote code execution or causing Asterisk to crash. The chansip channel driver must be installed and configured, and its textsupport option must be enabled; textsupport defaults to no. The chansip driver was deprecated in Asterisk 20 and completely removed in all later versions. Repository comparisons verify patch containment in Asterisk 20.20.1, 21.12.3, 22.10.1 and 23.4.1, and Certified Asterisk 20.7-cert11 and 22.8-cert3. The affected release-track scope remains unresolved: structured metadata includes later release tracks even though the advisory says the required chansip driver was removed there.

Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, a NULL pointer dereference in the Asterisk Manager Interface (AMI) may allow an unauthenticated attacker to crash Asterisk when Digest Authentication is used via HTTP. The Asterisk HTTP web server, AMI, and AMI access via HTTP must all be enabled; each is disabled by default. The attacker must be able to connect to the HTTP server, which binds only to 127.0.0.1 by default even when enabled. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.

Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, a NULL pointer dereference in the Asterisk Manager Interface (AMI) may allow an unauthenticated attacker to crash Asterisk when Digest Authentication is used via HTTP. The Asterisk HTTP web server, AMI, and AMI access via HTTP must all be enabled; each is disabled by default. The attacker must be able to connect to the HTTP server, which binds only to 127.0.0.1 by default even when enabled. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.

Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an authenticated attacker may cause a heap-use-after-free in PJSIP TCP/SDP handling by sending a SIP INVITE over a connection-oriented transport and disconnecting before Asterisk responds with the 200 OK. So far, the crash has only been reproduced when Asterisk is built with Address Sanitizer, which detects the issue. Address Sanitizer is a development tool with significant performance overhead and, according to the maintainer, is not used in production systems. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.

Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an out-of-bounds write in chanunistim DIALPAGE digit handling can overflow the phonenumber field and crash Asterisk when an attacker sends a carefully crafted incoming request packet. The chanunistim module must be loaded and configured with a valid UNISTIM UDP port that the attacker can reach. The attacker must register as a configured phone MAC, or the deployment must have an equivalent production/autoprovisioning path that allows the client to reach the main page. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.

Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an out-of-bounds write in chanunistim DIALPAGE digit handling can overflow the phonenumber field and crash Asterisk when an attacker sends a carefully crafted incoming request packet. The chanunistim module must be loaded and configured with a valid UNISTIM UDP port that the attacker can reach. The attacker must register as a configured phone MAC, or the deployment must have an equivalent production/autoprovisioning path that allows the client to reach the main page. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.

Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an unbounded sscanf in respjsippubsub when parsing the MWI NOTIFY Message-Account field may allow an unauthenticated attacker to send a carefully crafted packet that causes a stack buffer overflow and corrupts the underlying transport, permanently disabling all SIP functionality. An Asterisk restart is required to restore full operation. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.

Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an unbounded memcpy of OGG/Speex packet data in formatoggspeex can cause a heap buffer overflow and crash Asterisk when reading a file containing corrupted Speex audio. The attacker must create the file and make it available to Asterisk either through sufficiently elevated privileges or by convincing an Asterisk administrator to make it available. Asterisk must also be configured to play that file. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.

Insecure Permissions vulnerability in asterisk v22 allows a remote attacker to execute arbitrary code via the actioncreateconfig function. NOTE: this is disputed by the Supplier because the impact is limited to creating empty files outside of the Asterisk product directory (aka directory traversal) and the attack can only be performed by a privileged user who has the ability to manage the configuration.

Asterisk is an open-source private branch exchange (PBX). Prior to versions 18.24.3, 20.9.3, and 21.4.3 of Asterisk and versions 18.9-cert12 and 20.7-cert2 of certified-asterisk, if Asterisk attempts to send a SIP request to a URI whose host portion starts with .1 or [.1], and resresolverunbound is loaded, Asterisk will crash with a SEGV. To receive a patch, users should upgrade to one of the following versions: 18.24.3, 20.9.3, 21.4.3, certified-18.9-cert12, certified-20.7-cert2. Two workarounds are available. Disable resresolverunbound by setting noload = resresolverunbound.so in modules.conf, or set rewritecontact = yes on all PJSIP endpoints. NOTE: This may not be appropriate for all Asterisk configurations.

Asterisk is an open source private branch exchange (PBX) and telephony toolkit. Prior to asterisk versions 18.24.2, 20.9.2, and 21.4.2 and certified-asterisk versions 18.9-cert11 and 20.7-cert2, an AMI user with write=originate may change all configuration files in the /etc/asterisk/ directory. This occurs because they are able to curl remote files and write them to disk, but are also able to append to existing files using the FILE function inside the SET application. This issue may result in privilege escalation, remote code execution and/or blind server-side request forgery with arbitrary protocol. Asterisk versions 18.24.2, 20.9.2, and 21.4.2 and certified-asterisk versions 18.9-cert11 and 20.7-cert2 contain a fix for this issue.

Asterisk is an open source private branch exchange and telephony toolkit. After upgrade to 18.23.0, ALL unauthorized SIP requests are identified as PJSIP Endpoint of local asterisk server. This vulnerability is fixed in 18.23.1, 20.8.1, and 21.3.1.

Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an authenticated attacker may crash Asterisk through a buffer over-read in the PJSIP MWI body parser by sending a carefully crafted SIP NOTIFY request. The attacker must pass SIP authentication using either a username/password or source IP address matching. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.

Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 22.8-cert3, an authenticated attacker with read-only permissions for the Asterisk REST Interface (ARI) may, under certain conditions, execute write operations through REST-over-WebSocket. The authorization bypass permits arbitrary module path loading and conditional remote code execution. The Asterisk HTTP web server must be enabled and reachable, and the attacker must already have valid read-only ARI credentials. HTTP is disabled by default and binds only to 127.0.0.1 by default even when enabled. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 22.8-cert3.

Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an authenticated attacker may crash Asterisk through a buffer over-read in the PJSIP MWI body parser by sending a carefully crafted SIP NOTIFY request. The attacker must pass SIP authentication using either a username/password or source IP address matching. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.

Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 22.8-cert3, an authenticated attacker with read-only permissions for the Asterisk REST Interface (ARI) may, under certain conditions, execute write operations through REST-over-WebSocket. The authorization bypass permits arbitrary module path loading and conditional remote code execution. The Asterisk HTTP web server must be enabled and reachable, and the attacker must already have valid read-only ARI credentials. HTTP is disabled by default and binds only to 127.0.0.1 by default even when enabled. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 22.8-cert3.

Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an authenticated attacker may cause a stack buffer overflow in resxmpp XMPP namespace prefix handling using carefully crafted packets. The resxmpp module must be loaded, an XMPP connection must be configured in xmpp.conf, and the attacker must have an XMPP account on the same or a federated server. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.

Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, the LDAP realtime driver resconfigldap may permit LDAP filter injection through a SIP username, allowing an unauthenticated attacker to make arbitrary LDAP queries using carefully crafted SIP packets and disclose information. The resconfigldap module must be loaded and configured to access an LDAP server, which is not the default. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.

Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, a stack buffer overflow in the H.323 ooTrace() trace-logging function can occur when unbounded vsprintf writes into a fixed 2048-byte buffer. A remote attacker may send a carefully crafted packet that causes the Asterisk process to crash. The chanooh323 addon channel driver must be explicitly compiled and installed, which is not the default, and its port must be publicly reachable. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.

Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, astloggrabber executes a Python script from the world-writable /tmp directory. An attacker already authorized to open a shell session on the Asterisk server may place a malicious script there and gain elevated privileges or execute code when an administrator runs astloggrabber as a user with elevated privileges. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.

Asterisk is an open source private branch exchange and telephony toolkit. In affected deployments, an authenticated attacker may cause a T.140 RED out-of-bounds write during generation accumulation using carefully crafted packets, potentially allowing remote code execution or causing Asterisk to crash. The chansip channel driver must be installed and configured, and its textsupport option must be enabled; textsupport defaults to no. The chansip driver was deprecated in Asterisk 20 and completely removed in all later versions. Repository comparisons verify patch containment in Asterisk 20.20.1, 21.12.3, 22.10.1 and 23.4.1, and Certified Asterisk 20.7-cert11 and 22.8-cert3. The affected release-track scope remains unresolved: structured metadata includes later release tracks even though the advisory says the required chansip driver was removed there.

Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an authenticated Asterisk REST Interface (ARI) attacker with read-only privileges may use setChannelVar to execute write dialplan functions, including FILE() writes, even when livedangerously in asterisk.conf is set to no. The Asterisk HTTP web server must be enabled and reachable, and the attacker must already have valid read-only ARI credentials. HTTP is disabled by default and binds only to 127.0.0.1 by default even when enabled. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.

Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, the PostgreSQL and TDS/MSSQL Channel Event Log backends celpgsql and celtds may permit arbitrary SQL execution when untrusted data is set in the CEL eventtype column by the CELGenUserEvent dialplan application. The celpgsql or celtds backend must be loaded and configured, and the administrator must call CELGenUserEvent in the dialplan without ensuring that only valid data is passed to the application. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.

Asterisk is an open source private branch exchange and telephony toolkit. From 21.0.0-pre1 until Asterisk 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 22.8-cert3, the chanooh323 Q.931 party-number parser lacks the CVE-2022-37325 fix because that fix was never forward-ported from Asterisk 20 to later versions. Malformed Q.931 elements in an OOH323 request can therefore crash Asterisk. This issue affects Asterisk versions greater than 20. The chanooh323 addon channel driver must be explicitly compiled and installed, which is not the default, and its port must be publicly reachable. This issue is fixed in Asterisk 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 22.8-cert3.

Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, insufficient bounds checking in the chanooh323 Q.931 information-element parser permits an out-of-bounds read that may allow an unauthenticated attacker to crash Asterisk using carefully crafted setup packets. The chanooh323 addon channel driver must be explicitly compiled and installed, which is not the default, and its port must be publicly reachable. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.

Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an unauthenticated attacker may use reflected cross-site scripting in phone provisioning HTTP error pages to retrieve an authorized user's AMI session cookie and impersonate that user when resphoneprov is enabled. The Asterisk HTTP web server, Asterisk Manager Interface (AMI), and AMI access via HTTP must all be enabled; each is disabled by default. The attacker must be able to connect to the HTTP server, which binds only to 127.0.0.1 by default even when enabled, and must convince the authorized user to click a malicious link. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.

A local privilege escalation vulnerability exists in the safeasterisk script included with the Asterisk toolkit package. When Asterisk is started via this script (common in SysV init or FreePBX environments), it sources all .sh files located in /etc/asterisk/startup.d/ as root, without validating ownership or permissions.

Non-root users with legitimate write access to /etc/asterisk can exploit this behaviour by placing malicious scripts in the startup.d directory, which will then execute with root privileges upon service restart.