The IAX2 channel driver (chaniax2) in Asterisk before 20070504 does not properly null terminate data, which allows remote attackers to trigger loss of transmitted data, and possibly obtain sensitive information (memory contents) or cause a denial of service (application crash), by sending a frame that lacks a 0 byte.
Insecure Permissions vulnerability in asterisk v22 allows a remote attacker to execute arbitrary code via the actioncreateconfig function. NOTE: this is disputed by the Supplier because the impact is limited to creating empty files outside of the Asterisk product directory (aka directory traversal) and the attack can only be performed by a privileged user who has the ability to manage the configuration.
Stack-based buffer overflow in the IAX2 channel driver (chaniax2) in Asterisk before 1.2.22 and 1.4.x before 1.4.8, Business Edition before B.2.2.1, AsteriskNOW before beta7, Appliance Developer Kit before 0.5.0, and s800i before 1.0.2 allows remote attackers to execute arbitrary code by sending a long (1) voice or (2) video RTP frame.
Asterisk is an open source private branch exchange (PBX) and telephony toolkit. Prior to asterisk versions 18.24.2, 20.9.2, and 21.4.2 and certified-asterisk versions 18.9-cert11 and 20.7-cert2, an AMI user with write=originate may change all configuration files in the /etc/asterisk/ directory. This occurs because they are able to curl remote files and write them to disk, but are also able to append to existing files using the FILE function inside the SET application. This issue may result in privilege escalation, remote code execution and/or blind server-side request forgery with arbitrary protocol. Asterisk versions 18.24.2, 20.9.2, and 21.4.2 and certified-asterisk versions 18.9-cert11 and 20.7-cert2 contain a fix for this issue.
Asterisk is an open source private branch exchange and telephony toolkit. Prior to versions 20.7-cert9, 20.18.2, 21.12.1, 22.8.2, and 23.2.2, the asterisk/contrib/scripts/astcoredumper runs as root, as noted by the NOTES tag on line 689 of the astcoredumper file. The script will source the contents of /etc/asterisk/astdebugtools.conf, which resides in a folder that is writeable by the asterisk user:group. Due to the /etc/asterisk/astdebugtools.conf file following bash semantics and it being loaded; an attacker with write permissions may add or modify the file such that when the root astcoredumper is run; it would source and thereby execute arbitrary bash code found in the /etc/asterisk/astdebugtools.conf. This issue has been patched in versions 20.7-cert9, 20.18.2, 21.12.1, 22.8.2, and 23.2.2.
Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an unbounded sscanf in respjsippubsub when parsing the MWI NOTIFY Message-Account field may allow an unauthenticated attacker to send a carefully crafted packet that causes a stack buffer overflow and corrupts the underlying transport, permanently disabling all SIP functionality. An Asterisk restart is required to restore full operation. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.
Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an authenticated Asterisk REST Interface (ARI) attacker with read-only privileges may use setChannelVar to execute write dialplan functions, including FILE() writes, even when livedangerously in asterisk.conf is set to no. The Asterisk HTTP web server must be enabled and reachable, and the attacker must already have valid read-only ARI credentials. HTTP is disabled by default and binds only to 127.0.0.1 by default even when enabled. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.
Asterisk is an open source private branch exchange and telephony toolkit. Prior to versions 20.7-cert9, 20.18.2, 21.12.1, 22.8.2, and 23.2.2, when astcoredumper writes its gdb init and output files to a directory that is world-writable (for example /tmp), an attacker with write permission(which is all users on a linux system) to that directory can cause root to execute arbitrary commands or overwrite arbitrary files by controlling the gdb init file and output paths. This issue has been patched in versions 20.7-cert9, 20.18.2, 21.12.1, 22.8.2, and 23.2.2.
The Manager Interface in Asterisk before 1.2.18 and 1.4.x before 1.4.3 allows remote attackers to cause a denial of service (crash) by using MD5 authentication to authenticate a user that does not have a password defined in manager.conf, resulting in a NULL pointer dereference.
The SIP channel driver (chansip) in Asterisk before 1.2.18 and 1.4.x before 1.4.3 does not properly parse SIP UDP packets that do not contain a valid response code, which allows remote attackers to cause a denial of service (crash).
The handleresponse function in chansip.c in Asterisk before 1.2.17 and 1.4.x before 1.4.2 allows remote attackers to cause a denial of service (crash) via a SIP Response code 0 in a SIP packet.
The channel driver in Asterisk before 1.2.17 and 1.4.x before 1.4.2 allows remote attackers to cause a denial of service (crash) via a SIP INVITE message with an SDP containing one valid and one invalid IP address.
Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an unbounded memcpy of OGG/Speex packet data in formatoggspeex can cause a heap buffer overflow and crash Asterisk when reading a file containing corrupted Speex audio. The attacker must create the file and make it available to Asterisk either through sufficiently elevated privileges or by convincing an Asterisk administrator to make it available. Asterisk must also be configured to play that file. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.
Multiple stack-based buffer overflows in the processsdp function in chansip.c of the SIP channel T.38 SDP parser in Asterisk before 1.4.3 allow remote attackers to execute arbitrary code via a long (1) T38FaxRateManagement or (2) T38FaxUdpEC SDP parameter in an SIP message, as demonstrated using SIP INVITE.
Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, a NULL pointer dereference in the Asterisk Manager Interface (AMI) may allow an unauthenticated attacker to crash Asterisk when Digest Authentication is used via HTTP. The Asterisk HTTP web server, AMI, and AMI access via HTTP must all be enabled; each is disabled by default. The attacker must be able to connect to the HTTP server, which binds only to 127.0.0.1 by default even when enabled. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.
Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 22.8-cert3, an authenticated attacker with read-only permissions for the Asterisk REST Interface (ARI) may, under certain conditions, execute write operations through REST-over-WebSocket. The authorization bypass permits arbitrary module path loading and conditional remote code execution. The Asterisk HTTP web server must be enabled and reachable, and the attacker must already have valid read-only ARI credentials. HTTP is disabled by default and binds only to 127.0.0.1 by default even when enabled. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 22.8-cert3.
Asterisk is an open source private branch exchange and telephony toolkit. From 21.0.0-pre1 until Asterisk 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 22.8-cert3, the chanooh323 Q.931 party-number parser lacks the CVE-2022-37325 fix because that fix was never forward-ported from Asterisk 20 to later versions. Malformed Q.931 elements in an OOH323 request can therefore crash Asterisk. This issue affects Asterisk versions greater than 20. The chanooh323 addon channel driver must be explicitly compiled and installed, which is not the default, and its port must be publicly reachable. This issue is fixed in Asterisk 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 22.8-cert3.
Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, a NULL pointer dereference in the Asterisk Manager Interface (AMI) may allow an unauthenticated attacker to crash Asterisk when Digest Authentication is used via HTTP. The Asterisk HTTP web server, AMI, and AMI access via HTTP must all be enabled; each is disabled by default. The attacker must be able to connect to the HTTP server, which binds only to 127.0.0.1 by default even when enabled. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.
Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, a stack buffer overflow in the H.323 ooTrace() trace-logging function can occur when unbounded vsprintf writes into a fixed 2048-byte buffer. A remote attacker may send a carefully crafted packet that causes the Asterisk process to crash. The chanooh323 addon channel driver must be explicitly compiled and installed, which is not the default, and its port must be publicly reachable. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.
Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 22.8-cert3, an authenticated attacker with read-only permissions for the Asterisk REST Interface (ARI) may, under certain conditions, execute write operations through REST-over-WebSocket. The authorization bypass permits arbitrary module path loading and conditional remote code execution. The Asterisk HTTP web server must be enabled and reachable, and the attacker must already have valid read-only ARI credentials. HTTP is disabled by default and binds only to 127.0.0.1 by default even when enabled. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 22.8-cert3.
The Asterisk Extension Language (AEL) in pbx/pbxael.c in Asterisk does not properly generate extensions, which allows remote attackers to execute arbitrary extensions and have an unknown impact by specifying an invalid extension in a certain form.
Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an authenticated attacker may cause a heap-use-after-free in PJSIP TCP/SDP handling by sending a SIP INVITE over a connection-oriented transport and disconnecting before Asterisk responds with the 200 OK. So far, the crash has only been reproduced when Asterisk is built with Address Sanitizer, which detects the issue. Address Sanitizer is a development tool with significant performance overhead and, according to the maintainer, is not used in production systems. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.
Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an authenticated attacker may cause a stack buffer overflow in resxmpp XMPP namespace prefix handling using carefully crafted packets. The resxmpp module must be loaded, an XMPP connection must be configured in xmpp.conf, and the attacker must have an XMPP account on the same or a federated server. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.
A local privilege escalation vulnerability exists in the safeasterisk script included with the Asterisk toolkit package. When Asterisk is started via this script (common in SysV init or FreePBX environments), it sources all .sh files located in /etc/asterisk/startup.d/ as root, without validating ownership or permissions.
Non-root users with legitimate write access to /etc/asterisk can exploit this behaviour by placing malicious scripts in the startup.d directory, which will then execute with root privileges upon service restart.
Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, the PostgreSQL and TDS/MSSQL Channel Event Log backends celpgsql and celtds may permit arbitrary SQL execution when untrusted data is set in the CEL eventtype column by the CELGenUserEvent dialplan application. The celpgsql or celtds backend must be loaded and configured, and the administrator must call CELGenUserEvent in the dialplan without ensuring that only valid data is passed to the application. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.
Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, the LDAP realtime driver resconfigldap may permit LDAP filter injection through a SIP username, allowing an unauthenticated attacker to make arbitrary LDAP queries using carefully crafted SIP packets and disclose information. The resconfigldap module must be loaded and configured to access an LDAP server, which is not the default. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.
Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, astloggrabber executes a Python script from the world-writable /tmp directory. An attacker already authorized to open a shell session on the Asterisk server may place a malicious script there and gain elevated privileges or execute code when an administrator runs astloggrabber as a user with elevated privileges. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.
Asterisk is an open source private branch exchange and telephony toolkit. Prior to versions 20.7-cert9, 20.18.2, 21.12.1, 22.8.2, and 23.2.2, the astxmlopen() function in xml.c parses XML documents using libxml with unsafe parsing options that enable entity expansion and XInclude processing. Specifically, it invokes xmlReadFile() with the XMLPARSENOENT flag and later processes XIncludes via xmlXIncludeProcess().If any untrusted or user-supplied XML file is passed to this function, it can allow an attacker to trigger XML External Entity (XXE) or XInclude-based local file disclosure, potentially exposing sensitive files from the host system. This can also be triggered in other cases in which the user is able to supply input in xml format that triggers the asterisk process to parse it. This issue has been patched in versions 20.7-cert9, 20.18.2, 21.12.1, 22.8.2, and 23.2.2.
Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an authenticated attacker may crash Asterisk through a buffer over-read in the PJSIP MWI body parser by sending a carefully crafted SIP NOTIFY request. The attacker must pass SIP authentication using either a username/password or source IP address matching. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.
Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an authenticated attacker may crash Asterisk through a buffer over-read in the PJSIP MWI body parser by sending a carefully crafted SIP NOTIFY request. The attacker must pass SIP authentication using either a username/password or source IP address matching. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.